Used Extruders in Illinois, USA

3.5″ TWO STAGE EXTRUDER SCREW 12027

3.5″ chrome plated two stage extruder screw with two rows of mixing pins. Unknown manufacturer.

WELEX 4.5" EXTRUDER SCREW 12343

• Manufacturer: Welex

Welex 4.5″ extruder screw, 2 stage 36:1 L/D, S/N 1803592, 36:1 L/D.

WELEX 4.5″ EXTRUDER SCREW 12730

• Manufacturer: Welex

Welex 4.5″ extruder screw, no S/N, single stage, double spiral, chrome plated, 24:1 L/D. 150″ long.

BRABENDER 3/4″ LAB EXTRUDER 18623

• Manufacturer: Brabender

Used C.W. Brabender Independent Table Top Extruder. S/N 1067/4. Type IND/EXTR/16-04-000. 3/4″ diameter 25:1 L/D ratio barrel. Four (4) zone temperature control panel. Extruder driven by a 1 HP D/C motor with SCR ...

CINCINNATI EXTRUSION 45MM EXTRUDER 18639

• Manufacturer: Cincinnati

Used Cincinnati Extrusion model Alpha 45-28G 45mm (1.77″) single screw extruder. S/N U2203. 28:1 L/D five (5) zone electrically heated, air cooled, and non-vented barrel at a 42″ centerline height. Hersteller Wat...

WELEX TWO STAGE 4.5″ EXTRUDER 12344

• Manufacturer: Welex

Welex 4.5″ extruder screw, 2 stage 36:1 L/D, S/N 180359.

4.5″ TWO STAGE EXTRUDER SCREW 12023

Two stage 4.5″ extruder screw with chrome plated mixing pins at the end of first stage. Approximately 28:1 L/D, single key shaft.

DELTAPLAST 5 HP PEDESTAL EXTRUDER 18675

One (1) used 30mm Deltaplast model DVH 30.125:24 pedestal extruder. S/N WO281:1.91. Having a 24:1 L/D ratio. Unit has a three (3) zone electrically heated, air cooled, and non-vented barrel. Radicon (David Brown)...

WAYNE MFG 3/4″ EXTRUDER 17885

• Manufacturer: Wayne

One used 3/4″ 20:1 L/D Wayne laboratory extruder having a two (2) zone electrically heated, air cooled barrel. Gearbox is belt driven by a 2 HP DC Motor with controls. Unitized temperature control panel with thre...

CINCINNATI 63mm TWIN SCREW EXTRUDER 19071

Used Cincinnati conical counter rotating twin screw plastic extruder discharge. Nominal 63 mm diameter (2.5″) screws at the discharge and nominal 115 mm diameter screws at the feed. Barrel is electrically heated ...

BRABENDER 35mm TWIN SCREW EXTRUDER 16813

• Manufacturer: Brabender

One (1) used Brabender Prep Center having a model TSE35/17D-A conical twin screw extrusion head. .Two conical inter meshing screws with a 35mm diameter at the barrel discharge end and a 17:1 L/D ratio. S/N 187502...

CINCINNATI 80mm TWIN SCREW EXTRUDER 18511

• Manufacturer: Cincinnati

Used Cincinnati model CMT80L-APC 80mm conical counter rotating twin screw plastic extruder. S/N 2040985/010. Screw length approximately 1,665mm long x 80mm diameter at the discharge. Has adapter plate that reduce...

DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19064

• Manufacturer: Davis-Standard

One (1) used 1.5” 24:1 L/D Davis Standard model DS 15 1.5” pedestal extruder having a four (4) zone electrically heated and air-cooled barrel. S/N R0385. Shop Order Number 52609. Unit is mounted on a tripod with ...