Used Extruders in Illinois, USA

UN 14 ZONE EXTRUDER TEMPERATURE 18779

One (1) unused extruder temperature control panel consisting of fourteen zones of Eurotherm 2216E temp controls. Was set up for use with a 4.5″ 32:1 Gloucester extruder. Labeled for 5 extruder zones, 1 screen cha...

DAVIS STANDARD 165MM60TPIH 6.5″ EXTRUDER 10869

• Manufacturer: Davis-Standard

Davis Standard model 165MM60TPIH, S/N X7206 27:1 L/D 150HP DC motor 100RPM screw speed 526HP rated gearbox with a 1.5 service factor. No feed throat, no control panel. Water cooled barrel. Last used as a secondar...

ACTUAL AE-25/10/22 25MM PEDESTAL EXTRUDER 18705

One (1) used Actual model AE-25/10/22 25mm pedestal extruder. Having a 24:1 L/D ratio. Unit has a three (3) zone electrically heated, air cooled, non-vented barrel. Barrel can be raised or lowered and also tilts ...

8 ZONE EXTRUDER CONTROL CONSOLE 18091

One (1) used eight (8) zone console type control panel. Last used with a Berstorff single screw extruder.

GLOUCESTER 233-011 3.5″ EXTRUDER 12878

Gloucester 3.5″, 24:1 L/D extruder model number 233-011. S/N 233-19848-01. Electrically heated air cooled vented and plugged barrel on a 42.5″ centerline. Free standing eight zone control panel with temperature c...

70mm LEISTRITZ EXTRUDER SIDE FEEDER 18279

• Manufacturer: Leistritz

Used 70mm Leistritz twin screw side feeder Model LSB70. Order No. 310.11004.01. Machine No. 4080. New 2011.

Bonnot Co. 12" Extruder – 40 HP Jacketed Grooved Barrel Industrial Screw Extruder

• Manufacturer: Bonnot

53993001 Used The Bonnot Co. 12" Extruder. 12" Diameter x 47" long screw. Jacketed grooved barrel section. Driven by an approximate 40 hp, 3/60/230/460 volt, 1775 rpm motor. Infeed 18" x 18". Centerline height ap...

AET dual diameter 10-6 32:1 L/D 50” centerline height film reclaim extruder

• Manufacturer: 60T 100D32

51068003 Used AET dual diameter 10-6 32:1 L/D 50" centerline height film reclaim extruder, Model 60T 100D32.

Bonnot Co. 12" Industrial Extruder – 40 HP Jacketed Barrel Screw Extruder (2000)

• Manufacturer: Bonnot

53993002 Used Bonnot Co. 12" Industrial Extruder 40 HP Jacketed Barrel Screw Extruder (2000). 12" Diameter x 47" long screw. Jacketed grooved barrel section. Driven by an approximate 40 hp, 3/60/230/460 volt, 17...

Leistritz 60mm ZSE MAXX Twin Screw Extruder – High-Performance Industrial Extruder

• Manufacturer: Leistritz

52546001 Used Leistritz 60mm ZSE MAXX Twin Screw Extruder, Type ZSE60MAXX-20D. (2) Co-rotating screws approximately 2.44" diameter x 62" long. Speed 400 rpm. Approximate 20 to 1 L/D ratio. 4 Barrel sections, 1 fe...

Buss Model MKS 30 Laboratory Ko-Kneader Extruder

• Manufacturer: Buss

51849001 Used Buss Model MKS 30 Laboratory Ko-Kneader Extruder, Serial# 97-1030 (1997). 30mm Diameter x approximate 17" long single screw. Throughput rates up to 30kg per hour. 3 Zone barrel electrically heated, ...

Extru-Tech E-325 Single Screw Extruder – 150-800 Lbs/Hr

• Manufacturer: ExtrutechExtrutech

53877002 Used Extru-Tech Model E-325, Single Screw Extruder. Unit designed primarily for research and development purposes. 3.25", Approximately 40 HP motor, Can process between 150 to 800 pounds per hour (68 to ...

Dr. Collin ZK25×24/42D Twin-Screw Extruder for Sale

• Manufacturer: Dr. CollinDr. Collin

54037001 Used Dr. Collin ZK25x24/42D Twin Screw Extruder. 25mm Diameter screws. 42:1 L/D. Maximum screw speed 521 RPM via a gearbox by a 30kW motor. 7 housing sections. Electrically heated, water cooled. Approxim...

Insta-Pro Model 2000 RC Continuous Extruder – 125 HP Motor, High-Capacity Processing

• Manufacturer: Insta-ProInsta-Pro

53147054 Used Insta-Pro Model 2000 RC Continuous Extruder. Rated capacity approximate 1,300 - 3,840 pounds per hour. Includes extruder barrel and main worm shaft assembly. Driven by 125 HP motor. ...