Used Extruders in Illinois, USA

Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled

• Manufacturer: Davis-Standard

10755162 Used Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 Gearbox reduction ratio; Rated at 1...

Shangha Target 11" Rolling & Scoring Line with Extruder – Chiclet Production

52189024 Used Shangha Target 11" Rolling & Scoring Line with Extruder. Designed to make chiclets. Consisting of: Twin Screw extruder with 5" diameter screws, electrically heated, die for 11.5" sheet, Dusting conv...

Pre-Owned PRISM KX-16 R&D Twin-Screw Extruder – 1.25?kW Motor, Full Infrastructure

• Manufacturer: PrismPrism

54037005 Used Thermofischer/PRISM 16 mm Eurolab Twin Screw Extruder. 16mm Diameter screws. 40:1 L/D. Maximum screw speed 500 RPM via a gearbox by a 1.25 kW motor. 7 housing sections. Electrically heated, water co...

Lleal AME-2600 SF-H Double Sigma Extruder Kneader | 350 Gal Working | Vacuum Rated | 300 HP

• Manufacturer: Sigma

54020001 Used Lleal Model AME-2600 SF-H Double Sigma Extruder Kneader, Carbon Steel. Useful volume 350 gallon, total volume 2,600 liter (680 gallon). Vacuum Rated 356 degrees F at 60psi. Sigma blades. Hydraulica...

Buy Pre-Owned Coperion ZSK 160 Twin Screw Extruder — 8 Barrel Sections + Gear Reducer

• Manufacturer: WP

53949001 Used Werner Pfleiderer / Coperion Model ZSK 160 Twin Screw Extruder. Associated spare parts. Project No 87-3593. 8 barrel sections. Screws and shafts. Gear Reducer with oil cooling system. 2500 HP GE Mot...

Theysohn 45mm Co-Rotating Twin Screw Extruder TSK-N 045 – 500 RPM, 50 HP Gearbox, Side Feeder

• Manufacturer: TheysohnTheysohn

53958001 Used Theysohn 45mm Co-Rotating Twin Screw Extruder, Type TSK-N 045. 45mm (1.77") diameter; 36:1 L/D; 8 housing sections and 1 die zone; electrically heated, water cooled. Max screw speed 500 RPM via a 50...

Leistritz Micro18-GGL Twin Screw Pelletizing Line – Industrial Polymer Extruder

• Manufacturer: Leistritz

40425043 Used Leistritz Twin Screw Pelletizing Line, Model Micro18-GGL. 18 mm Screws, counter rotating screws, 40:1 1/d, 500 rpm screw speed, electrically heated, water cooled barrel, 2.3 kw, 210/260 volt, 2950 r...

Aaron Process 300 Gallon Sigma Blade Mixer Extruder. 450 Gallon Total Capacity. Carbon Steel Construction. Serial Number 93300150464MX.

• Manufacturer: Sigma

54118001 Used - Aaron Process 300 Gallon Sigma Blade Mixer Extruder. 450 Gallon Total Capacity. Carbon Steel Construction. Serial Number 93300150464MX. Tangential Sigma Blades. Bowl is approximately, 54" front to...

Winkworth ZX500-6 Z-Blade Mixer-Extruder | 500L Working | Vacuum Lid | Jacketed | 304 SS | With Tool Temp Units

• Manufacturer: Tool Temp

10151559 Used Winkworth ZX500-6 Z-Blade Mixer/Extruder | 500L Working | Vacuum Lid | Jacketed | 304 SS | With Tool Temp Units. 500 liter (132Gal) working capacity with a 778 liter total capacity (product dependen...

Theyson TSK 060-44D-EXH 1500 Twin Screw Extruder | 60mm | 55 kW | 44:1 L/D | ATEX Motor

• Manufacturer: TheysohnTheysohn

54072001 Unused Theyson TSK 060-44D-EXH 1500 Twin Screw Extruder | 60mm | 55 kW | 44:1 L/D | ATEX Motor. 44:1 L/D. Maximum screw speed 500 RPM via a gearbox by a 55 Kw (73.75hp)1500 RPM-380volt/50cycle/3Ph Ex-pro...

High-Capacity Prealpina Single Screw Extruder – 1100 lbs/hr Production Rate

• Manufacturer: Prealpina

53309001 Used Prealpina 130 mm Diameter Single Screw Extruder, with a capacity of 1100 LBS/500 Kgs./hr. Electrically heated, air cooled. incl. die head and control panel. Reported to have new screw and barrel. Pr...

Xinda PSHJ-35 Twin Screw Extruder – 35.6mm, 42:1 L/D, 600 RPM, Clam Shell Barrel, 15kW, With Conveyor & Cutter – 2021

54023001 Used Xinda Twin Screw Extruder, Model PSHJ-35. 35.6mm screw diameter; 42:1 L/D ratio; 600 RPM screw speed; 30-100 kg/hour output; Clam shell barrel. 15 kW motor, 3/60/480V. Built 2021. With cooling conve...

PET Sheet Extrusion Line – 48” Wide, 2,000 lbs/hr, OMV D140 Extruder, (

54129001 Used PET Sheet Extrusion Line 48" Wide, 2,000 lbs/hr, OMV D140 Extruder (Used) 350 HP main motor; 30 HP drive system; Rated up to 2,000 lbs/hour (dependent on material and configuration); Multi-zone coo...