Used Extruders in Illinois, USA

KILLION / WAYNE 1″ LAB 18656

One (1) used laboratory sheet line consisting of the following:Killion model KL-100 1″ 24:1 extruder. S/N 12809. Unit has a three (3) zone electrically heated, air cooled, top vented, and plugged barrel at a 42″ ...

NRM PACEMAKER III 3.5″ 32:1 18061

One (1) used NRM PM III 3.5″ 32:1 L/D extruder having a five (5) zone electrically heated, air cooled, and non-vented barrel at an approximate 42″ center line height. Gearbox has a reduction ratio of 17.42:1 and ...

DAVIS STANDARD 3.5″ DOUBLE SPIRAL 12398

• Manufacturer: Davis-Standard

Davis Standard 3.5″ double spiral screw 32:1 L/D, 136″ overall length 12″ shank.Three are available.

EGAN 6″ 30:1 L/D 400 18037

• Manufacturer: Egan

One (1) used Egan 6″ 30:1 L/D extruder. S/N 37910. Having an electrically heated, water cooled (closed loop), and vented barrel at an approximate a 42” center line height. Water system is incomplete. Philadelphi...

BERLYN 2″ 30:1 L/D 40 18399

One (1) Used 2” Berlyn extruder having a 30:1 L/D ratio with a six (6) zone electrically heated, non-vented, both air- and water-cooled barrel at approximately a 42″ center line height. S/N 025D379. Gearbox is a ...

HARTIG 2.5″ 24:1 L/D 50 18342

One (1) Used 2.5″ Hartig extruder. S/N BE-819. 24:1 L/D four (4) zone electrically heated, air cooled, and non-vented barrel at approximately a 42″ center line height. 3″ round feed entrance. Koellmann gearbox ha...

KILLION KN-150 1.5″ 30:1 L/D 18111

One used Killion model KN-150 1.5″ 30:1 extruder. S/N 15437. Five (5) zone electrically heated, air cooled, and top-vented barrel at an approximate 39″ centerline height. Gearbox is a Koellmann model PEZS20 and h...

KILLION 1.250″ 30: 7.5 HP 16432

One used Killion model KN-125 1.25” 30:1 extruder having a four (4) zone electrically heated, air cooled, and non-vented barrel at approximately a 39″ centerline height. Gearbox is a Koellmann model PEZS-20 and h...

DAVIS STANDARD 1/4″ TUBING EXTRUSION 17437

• Manufacturer: Davis-Standard

Davis Standard 1/4″ tubing extrusion line including the following equipment:A. Davis Standard / Killion model KN-100 1.00″ 24:1 L/D extruder having a three (3) zone electrically heated, air cooled non-vented barr...

4.5″ TO 3.5″ CO-EX BLOCK 12342

One (1) used co-ex block. Main entrance was last used on a 4.5″ HPM extruder. Single co-ex entrance was last used on a 3.5″ extruder. Electrically heated. Includes adapter to sheet die.

EDI / NORDSON 56″ SHEET 18833

• Manufacturer: EDI

One (1) used Nordson/ Extrusion Dies Inc Model Ultraflex HRMC-100 heavy duty sheet die with a 56″ slot opening. Integral upper flexible lip and fixed removable lower lip. Adjusting bolts on 1″ centers. 45-degree ...

CLOEREN 53″ AUTO-GAUGE SHEET DIE 18355

One (1) used Cloeren Epoch AutoGauge sheet die with EDS having a 53″ slot opening. S/N 95-1380. Heavy duty body. Co-ex entrance. Integral upper flexible lip with auto adjustment. .000-.040 opening. External deckl...

44″ CLOEREN SHEET DIE 17582

One (1) used 44″ Cloeren sheet die with co-ex block mounted on a cart. Last used with 2″,2.5″, 3.5″, 3.5″ and 4.5″ extruders that produced sheet for cups. Job Number 89-361-770

4.5″ CRAMMER FEEDER 18765

One (1) Used Egan heavy duty crammer feeder having a nominal 4.5″ diameter screw. Screw is belt driven by a 30 hp dc motor through a Nuttal oversize gear reducer. Motor and gearbox have been updated. Includes ada...

CLOEREN 3-WAY CO-EX BLOCK 14423

Cloeren 3-way co-ex block for 2.5″, 3.5″, and 5.25″ extruders. Manufactured in 2000. Never been used.Two units are available.