Used Extruders in Illinois, USA

KRYENBORG 4.5″ CONTINUOUS SCREEN CHANGER 18956

Used 4.5″ (121mm) Kryenborg continuous screen changer, model K-SWE-121, dual 4.5″ breaker plates, rated 200-500 kg/hr, on cart. With hydraulic pump

3.5″ STATIC MIXER 18860

Used 3.5″ static mixer. 24″ long. 10″ OD flanged and threaded with 3.5″ inlet and 2.5″ OD opening. 9″ OD flange with 2.5″ opening.

JOHNSON 54 X 8 PULL 18800

• Manufacturer: Johnson

Johnson roll pull roll stand. Two (2) 54″ x 8″ diameter rubber covered rolls. Rolls are driven by an approximate 10 HP D/C motor through a “Drive-All” four speed gearbox. Air actuated top pull roll.

STERLING 6005FD-EZAC 5 HP BLOWER 18773

• Manufacturer: Sterling

Sterling model 6005FD-EZAC blower. S/N 79380. Directly driven impeller by a 5 H 230/460-volt motor. Has hinged door for easy impeller change out. 6″ OD inlet and outlet with Kongskilde OK160 rolled flange weld a...

CLOEREN 70″ AUTOFLEX SHEET DIE 18753

One (1) Cloeren 70″ auto-flex sheet die. 1″ x 4″ back center feed entrance. S/N 77831-2129. Manufactured April, 2003.

DYNISCO EH-60 6″ SCREEN CHANGER 18751

• Manufacturer: Dynisco

One (1) Dynisco model EH-60 screen changer having two nominal 6″ diameter breaker plates.

WELEX / MAAG 20 HP 18672

• Manufacturer: Welex

Welex / Maag model 56/56 20 HP melt pump with drive

BERINGER 3.5″ SCREEN CHANGER 18671

Beringer 3.5″ hydraulic screen changer with power pack

WELEX 18″ X 41″ 3 18674

• Manufacturer: Welex

Welex model 18X41RHSL 18″ x 41″ 3-roll sheet extrusion stack. S/N 4750. Rolls are silent chain driven by a 5 HP D/C motor and have air actuated nipping pressure with 8.5″ OD cylinders. Has 42″ wide rubber to meta...

MGB SL12 12″ SCREEN CHANGER 17616

21409-11 One (1) used MGB Model SC12 slide plate screen changer having two (2) nominal 12″ diameter breaker plates. Unit is mounted on a stand with casters supplying approximately a 42″ discharge height. Package ...

GLOUCESTER COOLING ROLL STACK 18352

One (1) used Gloucester heavy duty cooling and polishing stand having three (3) 55″ face x 24″ diameter chrome plated rolls mounted in a 45-degree angle arrangement for down stack operation at a 62″ center line h...

CLOEREN / PRODUCTION COMPONENTS 58″ 18338

One (1) used Cloeren / Production Components model Master-flex HD-40 sheet die with a 58″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex...

PRODUCTION COMPONENTS 54″ SHEET DIE 18327

One( 1) used Production Components Master Flex HD-40 sheet die with a 54″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex adjustment. Coa...

CLOEREN 42.5″ SHEET DIE 18330

One (1) used Cloeren sheet die with a 42.5″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex adjustment. Coat-hanger manifold. 3/4″ back c...

CLOEREN 30″ SHEET DIE 18334

One (1) used Cloeren sheet die with a 30″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex adjustment. Coat-hanger manifold. 3/4″ back cen...