Used Extruders in Illinois, USA

CHROME ROLL 10″ X 36″ 16019

10″ diameter x 36″ chrome roll cored for water cooling.Two are available.

SENCORP FOAM EXTRUSION DIE 10856

Sencorp foam extrusion die. 2 x 3,000 watt 240-Volt heaters. Manufactured in March of 1998.

SENCORP FOAM EXTRUSION DIE 10857

Sencorp foam extrusion die, S/N 329264, 2 x 3000 watt 240-Volt heaters. Manufactured in January of 1997.

TEXTURED ROLL 4942

Textured roll, cored for cooling, 12″ diameter x 53″ wide.

TEXTURED ROLL 53″ X 18″ 3790

Textured roll 18″ diameter x 53″ long with textured surface.

DAVIS STANDARD COOLING TANK 12803

• Manufacturer: Davis-Standard

Davis Standard cooling tanks, no S/N. Stainless steel construction. Measures 48″ x 24″ x 16″. Unit includes a pressure gauge, level meter, and pressure relief valve. Manufactured in January 2011. Never been used.

RELIANCE V.S. SERIES SCR 801429-129C 14719

• Manufacturer: Reliance Electric

Reliance VS series SCR model 801429-129C 300HP drive in free standing panel.

BERINGER NC-PVC-25 2.5″ SCREEN CHANGER 6395

Beringer model NC-PVC-25, 2.5″ screen changer. S/N 25NC15. Hydraulic power pack is not included.

CLOEREN EBR III 56″ WIDE 14425

Cloeren EBRIII, 56″ wide cast film die body, S/N 00-6613-17, 1.25″ X 4.75″ rectangular feed entry, 31 kW, 2,450 Lbs.Two are available.

EXTRUSION DIES, INC. 76″ ULTRAFLEX 12802

Extrusion Dies, Inc. 76″ Ultraflex H100 sheet die S/N 00-21320. 0.100″ lip opening 7 heater zones with eight 500 watt heaters each with 480V/3ph/60Hz operation. 1″ diameter center material entry. All flow areas a...

CLOEREN CO-EX BLOCK 14911

Cloeren co-ex block, S/N 97-1766-02, 4-3/4? x 1-1/2″ opening type: secector housing. Manufactured in June of 1997.

VETAPHONE CORONA PLUS CP1 1KW 15083

Vetaphone Corona Plus generator model CP1 1kW. Includes TF415 control and model HP1014C300 static unit, S/N 614600.

EDI 59″ SHEET DIE 18873

• Manufacturer: EDI

One used Nordson / Extrusion Dies Inc model Ultraflex R-75 59″ heavy duty sheet die. S/N 73-1362-2-3. Integral upper flexible lip and fixed removable lower lip. Adjusting bolts on 1″ centers. 45-degree restrictor...

BATTENFELD / GLOUCESTER 1428HD GRANULATOR 18762

• Manufacturer: Battenfeld
• Model: Gloucester

Used Battenfeld Gloucester Model 1428HD Granulator having a 14” x 28” throat opening. Serial number1428-194. Three knife open rotor with slant cut is belt driven by a 200 HP Motor. Feed hopper modified for convey...

FULLY REBUILT BERINGER 12″ SCREEN 18492

Fresh fully rebuilt Beringer model 1200 Hydraulic screen plate screen changer. 12″ nominal breaker plates. 42″ center-line. With stand and 10 HP hydraulic power pack.2 Available – 2nd unit was put in service for ...