Used Materials Testing in Taiwan

GR-F050 Wedge Grip

• Manufacturer: cometech testing machines

Capacity: 300kN | Jaw face width: 50mm | Mini. load cell: 20kN | Temperature limits: -10~200℃ | Weight: 32000g /pcs

GR-E050 Large Circular Bollard Grip

• Manufacturer: cometech testing machines

Capacity: 2kN | Core diameter size: Ø0.5〜Ø2mm | Mini. load cell: 100N | Temperature limits: -10~200℃ | Weight: 1400g | Standard: ASTM D2256

GR-D01 Vice Action Grip - Wave Face

• Manufacturer: cometech testing machines

Capacity: 2kN | Jaw face width: (W)mm | Specimen thickness: 0.2~4mm | Mini. load cell: 200N | Temperature limits: -10~200℃ | Weight: 1600g | Jaw face type: Wave face

GR-B010 Small single action vice grip

• Manufacturer: cometech testing machines

Capacity: 200N | Jaw face width: 30mm | Specimen thickness: 0.1~3mm | Mini. load cell: 20N | Temperature limits: -10~100℃ | Weight: 212g | Standard: ASTM D3759

GR-C030 4 point bend/flexure

• Manufacturer: cometech testing machines

Capacity: 20kN | Jaw face width: 24~160mm | Upper span: 24~300mm | Lower span: 58mm | Mini. load cell: 1kN | Temperature limits: 0~200℃ | Up weight: 7800g | Down weight: 11510g

GR-D05 Dual-way Vise Action Grip

• Manufacturer: cometech testing machines

Capacity: 2kN | Jaw face width: (W)mm | Specimen thickness: 0.2~40mm | Mini. load cell: 200N | Temperature limits: -10~200℃ | Weight: 1540g | Jaw face type: Serrated face

GR-D04 Single Adjustable Action Grip

• Manufacturer: cometech testing machines

Capacity: 5kN | Jaw face width: (W)mm | Specimen thickness: 0.2~4mm | Mini. load cell: 200N | Temperature limits: 0~200℃ | Weight: 1456g | Jaw face type: Rubber face

GR-B020 Wheel peel grips

• Manufacturer: cometech testing machines

Capacity: 200N | Wheel width: 25.4mm | Specimen thickness: 0.1~2mm | Temperature limits: -10~100℃ | Weight: 949g | Standard: ASTM D3330

Motor Twist Counter for yarn, Manual twist counter for yarn Confirm to ISO 2061 ASTM D1422 BS-903 FZ-T10001 JIS L1095 Standard

• Manufacturer: cometech testing machines

This test machine uses the characteristics of different length of yarn after twisting. Use the pointer or sensor to detect changes in the yarn to figure the twist value of the measured object. This is a very impo...

Pneumatic Specimen Punch

• Manufacturer: cometech testing machines

QC-603A of power is pneumatic with hand safety switch design, so there will be no security problem in operation. The tester with all kind of cutter can quickly cut out various shapes of specimen. It is suitable f...

Manual Crock Meter Confirm to JIS-L0849, ISO-105, AATCC-8 ,JIS-L0862 Standard

• Manufacturer: cometech testing machines

This tester’s abrasion head can clamp dry or wet white cloth, under 900g loads, revolving handle by hand to proceed with specimen abrasion test (Common standard is 10 test times), test speed is around 60 CPM. Aft...

Digital Rockwell Hardness Tester Confirm to GB/T230.2, JJS Z2245, EN-ISO6508, ASTME-18 Standard

Applications: Hard alloy / Surface hardened steel / Copper alloy / Carburized steel / Hard cast steel / Malleable casting / Annealed steel / Hardened steel /Aluminum alloy / Soft steel / Bearing steel Features: ●...

Dyeing Rubbing Tester Confirm to JIS-L0801/L0849/L1006/ L1084/ K6328/P8136 Standard

• Manufacturer: cometech testing machines

QC-319 for textile, leather and fluff dyeing fastness test equipment. Test hammer surface can clamp dry or wet by organic solvent white cloth, abrasion head select 200g or 500g load, speed 30CPM to proceed with b...

QC-638 Vertical Rebound Resilience Tester Confirm to ASTM-D2632 Standard

• Manufacturer: cometech testing machines

This tester measures rubber elasticity based on free vertical drop hammer test method. The 28 gram of hammer is lifted to a height of 400mm for impact test. Average the 4th , 5th and 6th impact bound height value...

Dropping Impact Tester Confirm to JIS-A5403, K6745 Standard

• Manufacturer: cometech testing machines

The specimen is placed on the platform of machine. Choose a designated size of steel ball to fall freely from a height, then the steel ball will impact on specimen’s surface. To observe the specimen of damaged co...