Electronic Crock meter Confirm to JIS-L0849, ISO-105, AATCC-8 ,JIS-L0862 Standard
used
- Manufacturer: cometech testing machines
To conduct the test, clamp specimen on fixed seat of abrasion, wrap 5cm x5cm white cloth on the rub-hammer above the specimen, abrasion hammer diameter is 16mm, center load is 900g, abrasion distance is 10cm, wit...
Taichung City, Taiwan
Optical Film Abrasion Tester
used
WD-M013 is mainly use in light load friction test. Specimen placed on a movable platform, abrasion head is designed to be able to zero setting of original load and test load can be set to 50-2000g. Light friction...
Taichung City, Taiwan
Solar Panel Abrasion Tester Confirm to EN 1096-2 Standard
used
GI-M043 is designed for the requirements of solar panel surface abrasion test, use wool felt to do abrasion test, during testing process that each wool felt abrasion stroke needs to self-rotation 20 degrees, set ...
Taichung City, Taiwan
Manual Crock Meter Confirm to JIS-L0849, ISO-105, AATCC-8 ,JIS-L0862 Standard
used
- Manufacturer: cometech testing machines
This tester’s abrasion head can clamp dry or wet white cloth, under 900g loads, revolving handle by hand to proceed with specimen abrasion test (Common standard is 10 test times), test speed is around 60 CPM. Aft...
Taichung City, Taiwan
Dyeing Rubbing Tester Confirm to JIS-L0801/L0849/L1006/ L1084/ K6328/P8136 Standard
used
- Manufacturer: cometech testing machines
QC-319 for textile, leather and fluff dyeing fastness test equipment. Test hammer surface can clamp dry or wet by organic solvent white cloth, abrasion head select 200g or 500g load, speed 30CPM to proceed with b...
Taichung City, Taiwan
QC-622H Surface Hardness Abrasion Tester
used
Surface Hardness Abrasion Tester is for measuring surface treatment such as painting, plating, coating, dyeing and finishing the design of the machine. It can use cotton, sand paper, steel wool and eraser to test...
Taichung City, Taiwan
DIN Abrasion Tester Confirm to DIN53516 ISO-4649 GB/T 9867 SATRA TM174 Standard
used
QC-618A is suitable for elastic material, rubber, tires, conveyor belts, transmission belts, shoe soles and software synthetic leather. The specimen of wear area is dia. 16mm which provide the required load and t...
Taichung City, Taiwan
TABER Abrasion Tester Confirm to ASTM D3884, ASTM D1175, ASTM D1044, ASTM D4060, TAPPI T476, SIO 9352, ISO 5470-1, JIS K7204, JIS A1453, JIS K6902, JIS L1096, JIS K 6964, DIN 52347, DIN53109, DIN53754, DIN 53799 Standard
used
- Manufacturer: SIO
QC-619K is made up of one specimen clamping disk and two grinding wheels and two vacuum nozzles, specimen clamps above disk with two wheels that can select different weights on specimens, grinding wheel diameter ...
Taichung City, Taiwan
QC-619H Abrasion Tester Confirm to ASTM D3884, ASTM D1175, ASTM D1044, ASTM D4060, TAPPI T476, SIO 9352, ISO 5470-1, JIS K7204, JIS A1453, JIS K6902, JIS L1096, JIS K 6964, DIN 52347, DIN53109, DIN53754, DIN 53799 Standard
used
- Manufacturer: SIO
Abrasion Tester (Abrader) is mainly composed of one specimen clamping disk, two grinding wheels and two vacuum nozzles. Abraser's Specimen clamps with two wheels above the disk can be combined with different load...
Taichung City, Taiwan
Tip: Enter manufacturer, model or keyword