Used Bending & Forming

Adige #x2 Tube and Bar Cut-Off Saw #0103417

• Manufacturer: Adige

SPECIFICATIONS: OVERALL DIMENSIONS: 18′ x 4′ x 6′ APPROXIMATE WEIGHT: 3,550 Lbs.

Double End Special Tube Bender #0103917

EQUIPPED WITH: Hydraulic Tank Electrical Panel Push Button Control Panel Parts Counter Motor: Hydraulic Tank: 10 HP, 230 / 460 / 3 / 60 OVERALL DIMENSIONS: 9′ x 5′ x 5′ APPROXIMATE WEIGHT: 1,600 Lbs.

1976 BROOKES 1922 #0100417

• Manufacturer: BROOKES

FENN #20 #0102417

• Manufacturer: FENN

MACHINE SPECIFICATIONS: Aluminum Low Carbon Steel Stainless Steel Beading: 2" x .095" (50.8 mm x 2.41 mm) 1-3/8" x .072" (34.9 mm x 1.82 mm) 1" x .065" (25.4 mm x 1.65 mm) Reducing: 2-1/2" x .109" (63.5 mm x 2.76...

PINES 1-1/4 #0641723

• Manufacturer: Pines
• Model: 1-14

Round tubing(non ferrous): 2.5" X 109" | Round tubing(mild steel): 2.5" X .065" | Shcedule 80: 1.5" | Maximum bending radius: 12" | Maximum bend angle: 200 DEGREES | Maximum tube length over mandrel: 89" | Bendi...

LUBOW DWB-2 #0308822

• Manufacturer: Lubow

Air pneumatic: YES | Max width of part: 36" | Cylinder stroke: 10" | Bend degree: 90" | Tooling: 5/16"

1966 BROOKES #21491 Hydraulic Press Type Tube Bender #0100617

• Manufacturer: BROOKES

SPECIFICATIONS: BROOKES #21491 Hydraulic Press Type Tube Bender SPECIFICATIONS:Stroke: 10""Main Cylinder Rod Diameter: 3.380""EQUIPPED Position)Motor: 25 HP, 400/440/3/50 - 1450 RPMOVERALL DIMENSIONS: 9' x

1"x .065" Pines #5T Tube Bender #0105017

• Manufacturer: Pines

SPECIFICATIONS: Material: Round Tubing: Non-Ferrous, 25,000 psi (two): 1″ x .072″ (25.4 mm x 1.82 mm) Square Tube: Mild Steel (two): 7/8" x .035" (22.2 mm x .889 mm) Round Bar: Mild Steel (two): 5/8" (15.8 mm) Sq...

18 Stand x 1-1/2" x 40" Bradbury Dual Head Rollforming Line #2100918

• Manufacturer: Bradbury

SPECIFICATIONS: Rowe Uncoiler ..Model Number..........................................16040-DSJ ..Serial Number.........................................29204 ..Maximum coil weight....................................

8/12 STAND X 2.5" X 9" RAFTER ROLLFORMER. #0775625

• Manufacturer: RAFTER

AMERICAN TRIM ROLLFORMER. #0666425

• Manufacturer: American

12 STAND X 2" X 20" PM ROLLFORMER. #0900324

• Manufacturer: P.M.

: SERVOMATIC IV PRESS FEED UNIT : PARTS CHUTE : UNCOILER : CUT-OFF PRESS : GAP-FRAME PRESS

1986 BRADBURY 425 #0891724

• Manufacturer: Bradbury
• Model: 425

The 24 stands are 12 by 12 Number stands: 24 | Spindle diameter: 3.5 inches | Roll space: 6 inches | Horizontal center distance: 22 inches | Motor: 100 horsepower

ENGEL INDUSTRIES M-3510 #0747323

• Manufacturer: Engel

EQUIPPED WITH: LINEAR ENCODER FEED CONTROL ENTRY DRIVEN PINCH ROLLS FLYING PRE-CUT CUT OFF PRESS HAND HELD JOG PENDANT POWER REQUIREMENTS: 220 VOLT, 3 PHASE, 60 HERTZ MACHINE IS TOOLED TO MAKE 1/4" CHANNEL TOOLIN...

R PANEL AND PBR PANEL PRODUCTION LINE. #0310823

AMS MP350P LENGTH CONTROLLER: Model MP Series Controller Model NK-1 Noise Kit MP300 Open Loop Manual,V13 Model 3812X-10 Power Cable 4348-10 Auxiliary Cable Model N256 Encoder Encoder Cable 3148-10 Model KMW-12 Kn...