Used Bending & Forming

Adige #x2 Tube and Bar Cut-Off Saw #0103417

• Manufacturer: Adige

SPECIFICATIONS: OVERALL DIMENSIONS: 18′ x 4′ x 6′ APPROXIMATE WEIGHT: 3,550 Lbs.

Double End Special Tube Bender #0103917

EQUIPPED WITH: Hydraulic Tank Electrical Panel Push Button Control Panel Parts Counter Motor: Hydraulic Tank: 10 HP, 230 / 460 / 3 / 60 OVERALL DIMENSIONS: 9′ x 5′ x 5′ APPROXIMATE WEIGHT: 1,600 Lbs.

1976 BROOKES 1922 #0100417

• Manufacturer: BROOKES

FENN #20 #0102417

• Manufacturer: FENN

MACHINE SPECIFICATIONS: Aluminum Low Carbon Steel Stainless Steel Beading: 2" x .095" (50.8 mm x 2.41 mm) 1-3/8" x .072" (34.9 mm x 1.82 mm) 1" x .065" (25.4 mm x 1.65 mm) Reducing: 2-1/2" x .109" (63.5 mm x 2.76...

ASC CA S4-44-14/14 #0133725

• Manufacturer: ASC - Automation Sciences Corporation

Series: SELECT ROLLFORMER | Top tooled for: "R" PANEL | Bottom tooled for: "AG" PANEL W/ 9" CENTERS | Number of passes: 14 | Arbor size: 3" | Front end design: BRAKE & HUMP | Controls: YES

1"x .065" Pines #5T Tube Bender #0105117

• Manufacturer: Pines

SPECIFICATIONS: Material: Round Tubing: Non-Ferrous, 25,000 psi (two): 1" x .072" (25.4 mm x 1.82 mm) Square Tube: Mild Steel (two): 7/8" x .035" (22.2 mm x .889 mm) Round Bar: Mild Steel (two): 5/8" (15.8 mm) Sq...

PINES 1-1/4 #0641723

• Manufacturer: Pines
• Model: 1-14

Round tubing(non ferrous): 2.5" X 109" | Round tubing(mild steel): 2.5" X .065" | Shcedule 80: 1.5" | Maximum bending radius: 12" | Maximum bend angle: 200 DEGREES | Maximum tube length over mandrel: 89" | Bendi...

LUBOW DWB-2 #0308822

• Manufacturer: Lubow

Air pneumatic: YES | Max width of part: 36" | Cylinder stroke: 10" | Bend degree: 90" | Tooling: 5/16"

1966 BROOKES #21491 Hydraulic Press Type Tube Bender #0100617

• Manufacturer: BROOKES

SPECIFICATIONS: BROOKES #21491 Hydraulic Press Type Tube Bender SPECIFICATIONS:Stroke: 10""Main Cylinder Rod Diameter: 3.380""EQUIPPED Position)Motor: 25 HP, 400/440/3/50 - 1450 RPMOVERALL DIMENSIONS: 9' x

1"x .065" Pines #5T Tube Bender #0105017

• Manufacturer: Pines

SPECIFICATIONS: Material: Round Tubing: Non-Ferrous, 25,000 psi (two): 1″ x .072″ (25.4 mm x 1.82 mm) Square Tube: Mild Steel (two): 7/8" x .035" (22.2 mm x .889 mm) Round Bar: Mild Steel (two): 5/8" (15.8 mm) Sq...

18 Stand x 1-1/2" x 40" Bradbury Dual Head Rollforming Line #2100918

• Manufacturer: Bradbury

SPECIFICATIONS: Rowe Uncoiler ..Model Number..........................................16040-DSJ ..Serial Number.........................................29204 ..Maximum coil weight....................................

PEARSON 4816 #0663325

• Manufacturer: Pearson

TOOLED FOR LOC SEAM PANEL BRADBURY STRAIGHTENER FAMCO SHEAR:

WATERBURY FARREL HI-PRO #1223424

• Manufacturer: Waterbury Farrel
• Model: HI-PRO

3/16" CUTOFF DIAMETER 1" SHANK LENGTH 1-1/2" CUTOFF LENGTH 225 PPM

78" WIDE BRANER PAD POUNTED TENSION STAND. #0790224

• Manufacturer: Braner

Braner Drag Wipe Tension Stand -Capacity: 78" Wide -Pad Type Design -Pad Length: 88" -Hydraulic Cylinders for Pressure -Entry Separator Tooling Bar -Passline: Approx. 56" -Overall Size: 109" L x 34" W x 93" Hig...

TISHKEN 10LE 1-1/2 #0789324

• Manufacturer: Tishken

Number stands: 10 | Spindle diameter: 1-1/2" | Roll space: 6" | Horizontal center distance: 8" | Distance between spindles: 4" | Spindle to base clearance: 4-1/2" | Motor: 7-1/2 HP | @ additonal cost: SPACERS AN...