Used Extruders in Illinois, USA

HARTIG 2.5″ 24:1 L/D 50 18342

One (1) Used 2.5″ Hartig extruder. S/N BE-819. 24:1 L/D four (4) zone electrically heated, air cooled, and non-vented barrel at approximately a 42″ center line height. 3″ round feed entrance. Koellmann gearbox ha...

BRABENDER IT7150 3/4″ & 1″ 19044

• Manufacturer: Brabender

Blades Stock No. 19044 – Brabender model Intelli-Torque IT7150 extruder. Currently installed 24:’ L/D barrel with 3/4″ screw and included spare 30:1 L/D barrel with 1″ screw. 2003 model year. Includes one each 4″...

KILLION KN-150 1.5″ 30:1 L/D 18111

One used Killion model KN-150 1.5″ 30:1 extruder. S/N 15437. Five (5) zone electrically heated, air cooled, and top-vented barrel at an approximate 39″ centerline height. Gearbox is a Koellmann model PEZS20 and h...

KILLION 1.250″ 30: 7.5 HP 16432

One used Killion model KN-125 1.25” 30:1 extruder having a four (4) zone electrically heated, air cooled, and non-vented barrel at approximately a 39″ centerline height. Gearbox is a Koellmann model PEZS-20 and h...

DAVIS STANDARD 150IN 1.5″ 24:1 17708

• Manufacturer: Davis-Standard

Davis Standard model 150IN DS-20 1.5″ extruder, S/N J6173, 1984 model year, 24:1 L/D vented barrel at a 42″ centerline. Davis Standard 6.53:1 gearbox rated for 50 HP with a service factor of 1.25 for a 152 RPM sc...

DAVIS STANDARD 1.5″ 34:1 L/D 17542

• Manufacturer: Davis-Standard
• Model: Thermatic

one (1) used Davis Standard model Thermatic 150 1.5″ extruder, S/N 62570, 34:1 L/D barrel having a five (5) zone electrically heated, air cooled, and non-vented barrel at approximately a 42? centerline height. Ge...

DAVIS STANDARD 1/4″ TUBING EXTRUSION 17437

• Manufacturer: Davis-Standard

Davis Standard 1/4″ tubing extrusion line including the following equipment:A. Davis Standard / Killion model KN-100 1.00″ 24:1 L/D extruder having a three (3) zone electrically heated, air cooled non-vented barr...

DAVIS STANDARD 1.5″ 20:1 L/D 17504

• Manufacturer: Davis-Standard

One (1) used 1.5″ 20:1 L/D ratio Davis Standard rubber extruder with powered feed roll on throat. Barrel is electrically heated, water cooled (closed loop) and vented at approximately a 42″ centerline height. Inc...

1997 Battenfeld Gloucester IBC Cage Bubble Cage S/n:38813-02

• Manufacturer: Battenfeld
• Model: Gloucester

1st Level Mezz, 1997 Battenfeld Gloucester IBC Cage Bubble Cage S/n:38813-02 Located in Alsip, IL.

1999 Battenfeld Gloucester Model:B4 Primary Fixed Nip 1.5Hp S/n:31742-05

• Manufacturer: Battenfeld
• Model: Gloucester

4th Level Mezz, 1999 Battenfeld Gloucester Model:B4 Primary Fixed Nip 1.5Hp S/n:31742-05 84" Face Width. Located in Alsip, IL.

1994 Battenfeld Gloucester Adjustable Bubble Cage Model:IBC Cage

• Manufacturer: Battenfeld
• Model: Gloucester

SUBJECT TO BULK BID: 1st Level Mezz, 1994 Battenfeld Gloucester Adjustable Bubble Cage Model:IBC Cage Located in Alsip, IL.

1994 Battenfeld Gloucester Primary Nip Model:84 PRI NIP with 1.5Hp Motor S/N:35930-16

• Manufacturer: Battenfeld
• Model: Gloucester

SUBJECT TO BULK BID: 4th Level Mezz, 1994 Battenfeld Gloucester Primary Nip Model:84 PRI NIP with 1.5Hp Motor S/N:35930-16 Primary Fixed Nip (Does not rotate). Nip face measures 84" Wide. Located in Alsip, IL.

4.5″ CRAMMER FEEDER 18765

One (1) Used Egan heavy duty crammer feeder having a nominal 4.5″ diameter screw. Screw is belt driven by a 30 hp dc motor through a Nuttal oversize gear reducer. Motor and gearbox have been updated. Includes ada...

CLOEREN 3-WAY CO-EX BLOCK 14423

Cloeren 3-way co-ex block for 2.5″, 3.5″, and 5.25″ extruders. Manufactured in 2000. Never been used.Two units are available.

HESTON 6″ SCREEN CHANGER 2709

6″ Heston screen changer, no model or serial number. 6″ diameter fits HPM extruder, with 3HP pump.