Used Extruders in Illinois, USA

DAVIS STANDARD 130mm 32:1 L/D 18935

• Manufacturer: Davis-Standard

One (1) used Davis Standard 130mm (5.1″) model 130IN45HT extruder. S/N U7644. Shop order 58491. Extruder has 32:1 L/D ratio with a seven (7) zone electrically heated, air cooled, and non-vented barrel at a 42″ ce...

GLOUCESTER 4.5″ 30:1 250 HP 18227

One (1) used Gloucester model 244-001 4.5″ 30:1 L/D extruder having an electrically heated, air cooled, and non-vented barrel at an approximate 56″ center line height. Cool Touch heaters with integral blowers wer...

TWO STAGE 4.5″ CHROME PLATED 12019

4.5″ chrome plated two stage extruder screw with mixing pins at the end of first stage. Approximately 28:1 L/D single key shaft. Unknown manufacturer.

DAVIS STANDARD 10″ 38:1 L/D 18953

• Manufacturer: Davis-Standard

Used Davis Standard Model 100TH100D 10″ 38:1 L/D extruder. Having a eight (8) zone electrically, heated, water cooled and non-vented barrel at a nominal 44″ center-line. S/N L3201. Shop Order 03643. Gearbox has a...

UNK MFG 5″ SINGLE SCREW 12404

Unk Mfg. 5″ single screw extruder barrel, non-vented, 24:1 L/D, 8 bolt flange mount to gearbox. Threaded front of barrel to accept screen changer. Overall length is 134.5″ with 4.25″ end extension.

WELEX 3.5″ 30:1 L/D 150 17954

• Manufacturer: Welex

One (1) used Welex 3.5″ 30:1 L/D extruder. Electrically heated water cooled (closed loop) and vented barrel at an approximate 69″ center line height. Center line height can be reduced approximately 8″ by removing...

NRM/DAVIS STANDARD 3.5PMIV RH/WC VTD/PLGO 12733

• Manufacturer: Davis-Standard

NRM / Davis Standard model 3.5PMIV RH/WC VTD/PLGO, 3.5″ extruder, S/N 19222. 24:1 L/D water cooled 7 zone vented and plugged barrel. Approximately 100-150HP DC motor into a belt driven 15.12:1 gearbox with a 1.25...

DAVIS STANDARD 4.5″ 24:1 L/D 19040

• Manufacturer: Davis-Standard

Davis standard model 45IN45 4.5″ extruder. S/N V3255. 24:1 L/D air cooled and non-vented barrel at a center line of 42″. Driven by a Marathon Blue Max 250 HP 460-volt A/C motor thru 17.49:1 304 HP capacity gearbo...

COPERIAN ZSK-40 40MM TWIN SCREW 18943

Used 40mm Coperion Type ZSK-40-Mega co-rotating twin screw extruder. S/N 07-3059. New in 2008. No barrels or screws included. Driven by 200 HP 1790 RPM A/C motor with Powerflight VFD controller. Has 1.155 gear ra...

AMERICAN KUHNE 100mm 30:1 L/D 18185

• Manufacturer: Kuhne

One (1) used American Kuhne 100mm (3.94″) 30:1 L/D extruder. S/N 6882. Has (7) zone electrically heated, air cooled, and non-vented barrel at an approximate 42″ center line height. Gearbox is a Koellmann model Un...

WERNER & PFLEIDERER ZSK40 TWIN 17698

• Manufacturer: WP

Werner & Pfleiderer Model ZSK40 40mm co-rotating twin screw extruder, S/N 180399, 1990 model year, 46:1 L//D vented barrel with 11 barrel sections and a 41″ centerline. Driven by a 50 HP 500-volt 1750/2100 RPM D/...

DAVIS STANDARD 3.5″ 34:1 L/D 17735

• Manufacturer: Davis-Standard

One (1) Used Davis Standard model 35IN35SR 3.5″ extruder, S/N K2191. 34:1 L/D barrel having a seven zone electrically heated and water cooled (closed loop) barrel at a 56″ centerline height. Gearbox has a 5.67:1 ...

DAVIS STANDARD 3.5″ 30:1 L/D 16399

• Manufacturer: Davis-Standard

Used Davis Standard model MV35IN35SR, 3.5″ extruder, S/N K2187, SO# 99878. 30:1 L/D barrel having a seven zone electrically heated and water cooled (closed loop) and side vented barrel at a 52″ centerline height....

GLOUCESTER 2522 2.5″ 32:1 L/D 17805

One (1) Used Gloucester model 2522 R2 2.5″ 32:1 L/D extruder with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72″ center line height. Gearbox has a reduction ra...

JOHNSON 1.5″ 8786

• Manufacturer: Johnson

Johnson 1-1/2″ extruder 24:1 L/D, non-vented barrel mounted on base for co-extrusion. 10HP DC motor with no controls. 11.32:1 gear box rating at 41HP with a 1.25 service factor. No barrel cooling. S/N 7621-15