Used processing

Carbon Steel Lightnin 775-75 Drive Agitator - IPP# 212833

• Manufacturer: Lightnin

Drive Agitator 0.75 kW (1.01 HP) Stainless Steel - IPP# 219251

• Manufacturer: HEW

250-1750 rpm SS vertical portable agitator mixer (3-blade) with electrical motor Mixer mounted on rack Motor data: 500V/ 0,75kW/ 1,33A/ 50Hz/ 2790 rpm mfd by HEW

Carbon Steel Alpine (Hosokawa) 800 AFG-1 Jet Pulverizer - IPP# 225221

• Manufacturer: Alpine

fluidised opposed jet milling (grinding air pressure 6 barg, nozzle 0 16mm) 1250 dm3 grinding bin volume, 80 mbar permissible operating pressure in grinding bin, max operating pressure in grinding bin, 5- nozzles...

Jet Pulverizer 22.4 kW (30 HP) Stainless Steel - IPP# 212537

• Manufacturer: Jet Pulverizer

Mikro Atomizer Rated for 6,000 rpm. Capable of handling capacities from 100 to 1000 lbs/hr, dependent on the material, this machine handles 3 functions in one machine. Pulverizes, air classifies and conveys the m...

Jet Pulverizer 22.4 kW (30 HP) Stainless Steel - IPP# 212529

• Manufacturer: Jet Pulverizer

Mikro Atomizer Rated for 6,000 rpm Capable of handling capacities from 100 to 1000 lbs/hr, dependent on the material, this machine handles 3 functions in one machine. Pulverizes, air classifies and conveys the ma...

Stainless Steel Mikro 6MA Jet Pulverizer - IPP# 212527

• Manufacturer: Jet Pulverizer

Mikro Atomizer Rated for 6,000 rpm. Capable of handling capacities from 100 to 1000 lbs/hr dependent on the material, this machine handles 3 functions in one machine. Pulverizes, air classifies and conveys the ma...

Stainless Steel 304 Fitzpatrick D Hammer Pulverizer - IPP# 24093

• Manufacturer: Fitzpatrick

10 HP Fixed knives blunt one side, w/reversible rotor. Unit driven by approx 10 HP, US varidrive. Screw feed driven by 1/4 HP, 3/60/230/460 volt US varidrive 3/60/230/460 volt US varidrive.

Mixer - Double Arm double sigma blade mixer, with jacketed trough - IPP# 212409

• Manufacturer: Sigma

Double sigma blade mixer with jacketed trough. Rated atmospheric internal. Trough is jacketed on bottom 1/3 of trough. Unit has tangential sigma blades, driven one side, with packing glands on shaft. Top cover is...

Colloid Mill Stainless Steel 316 - IPP# 238452

• Manufacturer: Crompton Greaves

316 SS contact with 304 SS parts jacketed colloid mill 0.75" inlet and outlet with Tri-Clover style fittings Jacket inlets and outlets are 0.50" Dolly stand mounted with on board controls including a GSz Variable...

Colloid Mill Stainless Steel 316 - IPP# 706279

• Manufacturer: International Process Plants

rotor speed 3000 rpm 3/50/220/380/440 volt 3" bottom diameter 316 s/steel feed chute, 5" x 2" 316 s/steel discharge chute, built on on/off switch

Screw Feeder Stainless Steel 304 - IPP# 225305

• Manufacturer: K-Tron

screw feeder with hopper 1.5 HP, 6.63:1 drive reducer, 30:18 pulley ratio, 158 rpm screw speed, belt driven, 360mm wide x 500mm deep x 370mm long trough with lump braker rotor, 4-chopper blades on rotor, driven b...

Rotary Feeder 254 mm (10 in) Stainless Steel 316 - IPP# 200799

wetted parts,and all Body parts 316 SS otary air Lock assembly, with hinged side access. 10" diameter straight through design. @" deeep recessed vanes (7) total. With mechanical seal on driven shaft end. Opposite...

Glass Drive Agitator Carbon Steel - IPP# 83135

• Manufacturer: DeDietrich

For closed tank mounting Straight through design. Mounting flange 1 1/2" face, 19 1/2" OD, 16 1/2" ID, with (16) bolt holes, 18" hole centers. Belt driven motor (no motor with unit or shaft with unit). mechanical...

Glass Drive Agitator - IPP# 95554

• Manufacturer: Lightnin

3.3/20 HP, 3/60, 250-1750 rpm motor. For DeDietrich agititator.

Glass Drive Agitator 11.2 kW (15 HP) - IPP# 91934

• Manufacturer: Pfaudler

10/15HP Mechanical seal with lubricator Motor: 8/12 KW ExeG1/G2/G3 motor For glass lined reactor.