Used processing in Japan

Aikosha Manufacturing AM-90
- Manufacturer: Aikosha Manufacturing Co.
With ON/OFF switch & timer. Spare blades available.
Hiroshima, Japan
Shimazaki Works Cylindrical Vertical
- Manufacturer: Shimazaki Seisakusho
For medium viscosity (7000CP) 11kw cheaper 3-stage blades, filling volume: 1200L, Jacket: Yes Agitator: 11kw, low cost Shape: Bottom dish mirror Previous experience: Used in adhesive manufacturing process
Hiroshima, Japan
2001 SMTHE HFM-5 · HFM-10
- Manufacturer: SMT
HFM-5 Motor: 1.5kw Throughput: 3-5L/batch Rotation speed: 8000rpm(MAX) HFM-10 Motor: 2.2kw Processing volume: 5-10L/batch Rotation speed: 15000rpm(MAX) φ80 6 blades, sealed jacketed vessel
Hiroshima, Japan
Large machinery industry DSS-45-L
- Manufacturer: Large machine industry
Screen mesh size: 1mm Triple-layer drum structure (each screen is independent) Suitable for liquid products.
Hiroshima, Japan
Dalton DV-1-100
- Manufacturer: Dalton
Total capacity: 220L with butterfly valve Power: 0.75KW | Purchasing area: 60Hz | Material: Gluing section SUS | Quantity saved: 1 unit
Hiroshima, Japan
2007 Buhler SDV 1100
- Manufacturer: ビューラー
Chilled roll Effective dimensions of roll: φ400×1100 Motor: 45kw Weight: 4.2 tons With board We were able to check the operation of each part individually, but the operation check using the board shows only roll ...
Hiroshima, Japan
Magellan PT-60
- Manufacturer: Mazellar
Mixing volume: 60 L Remarks Catalog Power: 0.2kw | Material: Main section SUS | Quantity saved: One
Hiroshima, Japan
1979 Izumi Food Machinery Cylinder Vertical
- Manufacturer: Izumi
Jacket / stirrer (0.75 kw, two stirring blades) Closed type, with shower ball / manhole
Hiroshima, Japan
1984 Iwai machine cylinder vertical type
- Manufacturer: Iwai Machinery
Jacket / stirrer (2.2 kW, 3 propeller blades) ※ Satake Multi Mixer (360 rpm) Closed type, with shower ball / manhole
Hiroshima, Japan
Mutual Sangyo RM-1000
- Manufacturer: 相互産業
Capacity: 660L Gear ratio: 1/30 Lower discharge (slide gate type) Click here to see a video of the test run (YouTube) upon completion of the maintenance.
Hiroshima, Japan
Four stirrer paddles
Four paddle blades × 2 steps Motor: 11kw / 440v Power: 11kw | Material: Wetted part: SUS | Quantity saved: 1
Hiroshima, Japan
SUS tank with coil
Capacity: approx. 10 m3 With agitator (missing due to diversion of drive unit) Only near the bottom of the coil With heat insulator (with dents, etc.)
Hiroshima, Japan
Asada Ironworks MHK-20
- Manufacturer: Asada Ironworks
Due to long-term storage after maintenance, immediate delivery is not possible, but delivery can be made in a short period of time. Hydraulic unit available Drawings available
Hiroshima, Japan
Ashizawa PLM-300
- Manufacturer: reed bed
The vacuum specification was changed to a pressurized specification. Tank capacity 320L. Weight 4.6 tons. Bayer reduction gear drive. Can be converted to 200V by rewinding or replacing the motor.
Hiroshima, Japan
Osaka Stainless Steel Industry, vertical cylindrical type
- Manufacturer: Osaka Stainless Steel Industry Co.
1800φ × approx. 3200H (straight body 2000mm) Power: 3.7kw | Material: SUS | Quantity saved: One
Hiroshima, Japan