Used Machine Tools in Aichi, Japan

General machine tools / general-purpose machines / Oil washing machines
- used
※ If there is a difference between the description content and actual item, we will prioritize the actual item.
Toyohashi, Japan
Machine Tool Peripherals/Others/Workpiece Gripper
- used
Chuck: 8 inches If there is any discrepancy between the description and the actual product, the actual product will be given priority.
Toyohashi, Japan
EROWA Tools/ Tools/Manual Clamp Chucks
- used
- Manufacturer: Erowa
Chuck outer diameter: Φ80 mm If there is any discrepancy between the description and the actual product, the actual product will be given priority.
Toyohashi, Japan
unidentified BT40 Tool
- used
- Manufacturer: unidentified
BT40, Tool 25
Aichi, Japan
Tools/ Tools/V-groove square block
- used
300 x 300 x 300mm If there is any discrepancy between the description and the actual product, the actual product will be given priority.
Toyohashi, Japan
EROWA Tools/ Tools/Manual Clamp Chuck with Block
- used
- Manufacturer: Erowa
Chuck outer diameter: Φ80 mm,. Block dimensions: 80 x 80 x 80 mm In case of any discrepancy between the description and the actual product, the actual product will be given priority.
Toyohashi, Japan
BIG DAISHOWA BBT40 Tool
- used
- Manufacturer: Daishowa
BBT40, 17 bottles
Aichi, Japan
NIKKEN BT50-SLO-25-150 Tool
- used
- Manufacturer: Nikken
Side through
Aichi, Japan
Trusco Nakayama / Cabinets, Workbenches / Tool Racks
- used
- Manufacturer: Trasco Nakayama
For BT50,. Holders: 40 pcs. Dimensions: (Width)750(Depth)620(Height)1500mm Number of sections: 8 In case of any discrepancy between the description and the actual product, the actual product shall take precedence.
Toyohashi, Japan
JAM/Japan Automatic Machine AP100
- used
- Manufacturer: JAM/Japan
Material: SKS,. Hardness: HRC60°,. Dimensions: (D)90*(W)90*(H)100㎜,,, Weight: 2.4kg Weight: 2.4kg In case of any discrepancy between the description and the actual product, the actual product shall take priority.
Toyohashi, Japan
2012 Sugino machine JCC-W6650E
- used
- Manufacturer: Sugino
FANUC 0i-MD,. Max. cleaning pressure: 50MPa, Discharge flow rate: 18L/min. Discharge flow rate: 18L/min. S:X650*Y500*Z500, Number of nozzles: 4 No. of nozzles: 4 In case of any discrepancy between the description...
Toyohashi, Japan
1986 TSUNE CS7-125 Slicing Dicing Machine
- used
- Manufacturer: Tsune
φ125, square：116*116, rectangle:180*100
Aichi, Japan
JAM/Japan Automatic Machine TDP150
- used
- Manufacturer: JAM/Japan
Width of the clip: 120 mm, Width of the clip opening: 150 mm, Width of the clip opening: 150 mm Opening width: 150mm, Tilt: 45°, Tilt: 45°, Tilt: 45°, Tilt: 45°, Tilt: 45 Tilt: 45°, Swivel: 360 Swivel: 360°, Tilt...
Toyohashi, Japan
Takeda Machine TK-100HVI
- used
- Manufacturer: Takeda
Width: 104 mm, Height: 36 mm, Mouthpiece height: 36 mm, Mouthpiece width: 104 mm Height of the mouthpiece: 36 mm,, Maximum opening width of the mouthpiece: 0 to 170 mm Max. opening width: 0 to 170 mm, Max. angle:...
Toyohashi, Japan
2018 Okamoto Machine Tool PSG65SA1
- used
- Manufacturer: Okamoto
- Model: PSG-65
Table work surface size(L*W):610*500mm,. Table travel (left/right*forward/backward):750*540mm Distance from table top to wheel bottom: 22.5-522.5mm Chuck dimensions: 600*500*100mm, Allowable workpiece weight (inc...
Toyohashi, Japan