- Trusted Seller
Kirk Rudy 725
- Manufacturer: Kirk Rudy
Equipment Overview The Kirk-Rudy 725 is a robust inline tabbing system designed for high-speed mail tabbing applications. Known for reliability and easy integration into existing production lines, this unit suppo...
- Trusted Seller
2025 Taesungind PD 5L
- Manufacturer: Taesungind
Vessel Capacity (Full) 5.0 L Working Capacity 3.0 L Planetary Revolution Speed 0 – 50 rpm Blade Rotation Speed 0 – 100 rpm Disperser Speed Range 0 – 3500 rpm Vessel Diameter × Height 261 × 125 mm Chiller Capacity...
- Trusted Seller
2005 Alfa Laval LATEX 2000
- Manufacturer: Alfa-Laval
- Model: LATEX 2000
Machine type: Process Equipment | Machine location: Arizona | Stock #: 669797 | -capacity: Up to 650 Liters per Hour | -bowl speed: 7269 RPM | -motor shaft: 1500 RPM | -max field density: 1100 kg/m3 | -max sedim...
- Trusted Seller
2005 Alfa Laval LATEX 2000
- Manufacturer: Alfa-Laval
- Model: LATEX 2000
Machine type: Process Equipment | Machine location: Arizona | Stock #: 442249 | -capacity: Up to 650 Liters per Hour | -bowl speed: 7269 RPM | -motor shaft: 1500 RPM | -max field density: 1100 kg/m3 | -max sedim...
- Trusted Seller
2005 Alfa Laval LATEX 2000
- Manufacturer: Alfa-Laval
- Model: LATEX 2000
Machine type: Process Equipment | Machine location: Arizona | Stock #: 669251 | -capacity: Up to 650 Liters per Hour | -bowl speed: 7269 RPM | -motor shaft: 1500 RPM | -max field density: 1100 kg/m3 | -max sedim...
- Trusted Seller
2005 Alfa Laval LATEX 2000
- Manufacturer: Alfa-Laval
- Model: LATEX 2000
Machine type: Process Equipment | Machine location: Arizona | Stock #: 442663 | -capacity: Up to 650 Liters per Hour | -bowl speed: 7269 RPM | -motor shaft: 1500 RPM | -max field density: 1100 kg/m3 | -max sedim...
- Trusted Seller
M.J, Maillis WCA-Smart
- Manufacturer: Maillis
Machine type: Process Equipment | Machine location: Texas | Stock #: 657125 | -load capacity: 8,000 lbs | -turntable dimensions: 25″ Ring Gear | -electrical requirements: 460V, 3P, 60Hz
- Trusted Seller
Amtech ATC-4400
- Manufacturer: Amtech
Machine type: Process Equipment | Machine location: Pennsylvania | Stock #: 487859 | -motor: 50 HP | -cfm: 8000-12500 | -dust drum: 55 Gal | -electrical requirements: 280/460V, 3P, 60Hz | -dimensions: 82.5″ x 53...
- Trusted Seller
West Salem Machinery 4260S
- Manufacturer: West Salem Machinery
-300 HP -Direct Drive Motor with 60″ Wide VFD Panel -3HP HYD Power Pack -Top Loading Infeed Chute -42″ Rotor Diameter Drawing Available
- Trusted Seller
2021 SnowBall Machinery SNCF-600
- Manufacturer: SnowBall Machinery
Machine type: Process Equipment | Machine location: Upon Request | Stock #: 639717 | -capacity: 600L | -pneumatic requirements: 6 bar, 6L/min | -electrical requirements: 220V, 3P, 60Hz | -dimensions: 55.12″ x 35...
- Trusted Seller
2020 Convectium 710 Shark 010-0707100-0007-0A
- Manufacturer: Convectium
Fill up to 100 devices at a time in less than 60 seconds Dual heat injection system (Max temp of 125C) 120 PSI Maximum Pressure / Ultra-Quiet – Only 60 decibels
- Trusted Seller
2021 Cryogenic Equipment & Service (CES) CES-LT-LIN-10ftx36in-HOTL
- Manufacturer: Cryogenic Equipment & Service (CES)
Equipment Overview This CES 10ft x 36in Cryogenic Tunnel Freezer, manufactured in 2021, is designed for high-volume, continuous cryogenic freezing using liquid nitrogen. It features all-stainless construction, to...
- Trusted Seller
2018 Mongoose Model 84
- Manufacturer: Mongoose
~290 Hours Machine type: Process Equipment | Machine location: New York | Stock #: 932583 | Pump: 18 gallons per minute (GPM) at 4,000 pounds per square inch (PSI) | Engine: 49 horsepower Tier IV Turbo Diesel Eng...
- Trusted Seller
2021 Provisur SX330
- Manufacturer: Provisur
Includes: -Formax -SX Honing System -2 Blades -Leg Extension Insert -Cart for Parts
- Trusted Seller
2024 Dalmec MGC
- Manufacturer: Dalmec
900lb Capacity Machine type: Process Equipment | Machine location: Upon Request | Stock #: 661440 | Max working radius: 4000 mm | Max vertical lifting speed: 0,5 meters/second | Vertical lift: 2450 mm
Van Dorn Demag 300RS30F Injection Molding
- Manufacturer: Van Dorn Demag
- Model: 300RS30F
Good condition Van Dorn Demag 300RS30F Injection Moldings manufactured in 1991. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
