Used Processing in Wallonia, Belgium

2016 Core Shooter LAEMP LFB 25 - 40H, shooting volume 40 L

• Manufacturer: Laempe / Röperwerk

Core box dimensions: length 900mm, width 800mm, height 800mm Horizontal separated core boxes only With 2 side cylinders for core box blowing Outside dimensions: width 3200mm, depth ± 5000mm, height ± 3000mm With ...

Overband magnet, width 650mm ; 2kW

• Manufacturer: Steinert

Dimensions: Length: 1250mm; Width: 1200mm. Height: 550mm 28,2A; 70V; 2kW (in direct current)

2009 Degassing unit (impeller) FOSECO

• Manufacturer: Foseco

Rotostand Dimensions: Length: 1000mm; Width: 1850mm; Height: 2650mm 400V; 2KW With sword and additive dosing With Siemens control unit With operator screen Is anchored to the floor

Frequency converter BOSCH 25kVA 200V 300Hz

• Manufacturer: Bosch

Dimensions: Length: 1070mm; Width: 330mm; Height: 430mm WITHOUT control box

1993 Induction furnace INDUCTOTHERM Dual Trak 2 x 2t

• Manufacturer: Inductotherm

With hydraulic unit With water pumping station With switch cabinet VIP ( 3404 x 2278 x H 2032mm) With 2 furnace chairs, each 2 tonnes capacity With hydraulic ejector With transformer (pri. 21.000V; sec. 598V) 150...

Pouring ladle 3,5t MAS

• Manufacturer: MAS - Kovosvit

External dimensions: Length: 1950mm; Width: 1350mm; Height: 2250mm Internal dimensions: Ø1070mm; Depth: 1100mm With planetary gearbox ODERMATH With crane eye With traverse protection

2007 Ladle FOUNDRY SERVICE 1t

• Manufacturer: FOUNDRY SERVICE

Serial number: 5808 / Pan number: 1001 Dimensions: Length: 1550mm, width: 850mm; height: 1750mm Internal dimensions: Ø730mm; Depth: 950mm With ladle book With crane eye

2013 Casting ladle FOUNDRY SERVICE 3t

• Manufacturer: FOUNDRY SERVICE

Dimensions: Length: 1900mm; Width: 1350mm; Height: 1830mm Internal dimensions: Ø1020mm; Depth: 1030mm With splash guard With ladle book

Cast iron container 910 x 910mm x 580 deep

Cast iron container External dimensions: length: 950; width: 950mm; height: 750mm Internal dimensions: Length: 910mm; Width: 910mm; Depth: 580mm With forklift feet

1995 Pneumatic sand feeder FAT 500l

Sand feeder, brand FAT Capacity 500 litres 8 bar operating pressure With control unit

2019 Sand silo ±43m³

Dimensions: Ø 2865mm; height: 10770mm Overhauled and newly isolated in 2023 With railing, without access ladder With filter

2019 Small round coating basin ±80l MJS

• Manufacturer: MJS

External dimensions: length: 750mm; width: 540mm, height: 1100mm Useful dimensions: Ø470mm; depth: 570mm Capacity ±80 litres For water sizing With 1 agitator; 0.75 kW Frequency-controlled, Speed adjustable by kno...

2024 Small round coating basin ±80l MJS

• Manufacturer: MJS

External dimensions: length: 750mm; width: 540mm, height: 1100mm Useful dimensions: Ø470mm; depth: 570mm Capacity ±80 litres For water sizing With 1 agitator; 0.75 kW Frequency-controlled, Speed adjustable by kno...

Tumble belt shot blast machine GF ST9

• Manufacturer: G&F

Dimensions: length: 2960mm, width: ±1900mm, height: 4900mm Internal dimensions: Ø930mm; width: 1000mm Max unit weight: 120kg; max unit dimensions: 400mm With pneumatic separator With hydraulic skip With discharge...

2001 Green sand plant EIRICH RV15 ±20t/h

• Manufacturer: Eirich
• Model: RV15

Complete sand preparation, consisting of - mixer With moisture probe Mixer on weighing cells -With additive dosing on weighing cells -With 4 dosing screws for additives -With small hoppers for additives incl. INF...