Used Processing in Wallonia, Belgium

Gassing unit LÜBER LW FDA 825 8KW

• Manufacturer: Lüber
• Model: LW-FDA 825

Dimensions: Length: 900mm; Width: 700mm; Height: 1400mm With amine tank

Gravity die casting machine, hydraulic 700×510mm

Dimensions: length: 1950mm; width: 700mm; height: 1800mm With 4 guides

Horizontal tiltable gravity die casting machine, hydraulic

Dimensions: Length: 2100mm; Width: 800mm ; Height: 1150mm Min opening: ±270mm; max opening: ±460mm With 2 guide rods Turnable With hydraulic power With hydraulic control by 2 levers 380V, 4kW

Mixing and transport screw, 1350/120mm

External dimensions: length 2350mm, width 300mm, height 300mm Motor: 1,1 KW, 380 V, brand BAUER, 50 Hz, type drive motor, 44 rpm With sensor for rotation control

Furan sand reclamation plant OMEGA

• Manufacturer: Omega

Consisting of: -Shake out: dimensions: 1230mm×1300mm With suction hood Inclusive crusher -Fluid bed cooler (Without water cooler) -Sand transmitter -Magnetic drum -1× attrition unit -Fluid bed dust extractor -pne...

Dust filter DONALDSON TORIT, 64 000 m³/h

• Manufacturer: Donaldson / Torit / DCE
• Model: DF

Suitable for 64 cartridges Dimensions: Length: 5500mm; Width: 3100mm; Height: ±4500mm Intake on top of the filter 75kW,400V; 50Hz; 1475U/min With pneumatic cleaning Enclosed from the front With chimney Without si...

Dust filter 105.000 m³/h MÜNSTERMANN

• Manufacturer: MÜNSTERMANN

560 filter hose Filter with 2 separate filter bodies Possibility for pressure less cleaning 400V; 3ph; 50Hz With spark separator With pneumatic shut-off dampers With pneumatic cleaning With screw discharge With 2...

Furan sand screw mixer IMF 3 t./h.

• Manufacturer: IMF

Screw mixer: Dimensions: 1400mm; Width: 1000mm; Height: ±1900mm with pneumatic slider With 2 pumps driven by mixer motor With control cabinet and Simatic panel

Reclaiming plant for furan sand OMEGA

• Manufacturer: Omega

400V; 50Hz; 250A Consisting of: - sand breaker - 2 sand conveyors - 1 small hopper - 1 bucket elevator - vibrating conveyor pipe - magnetic separator - 2 × attrition unit - Fluid bed deduster - 1 large silo - Con...

Frequency converter AVK, 11 KVA, 200 V, 300 Hz

• Manufacturer: AVK

With electronic exciter 12 V Wit newly rewinded motor 200 V, 300 Hz, 11 kVA New control board for an extra charge

Treatment ladle 2t SENSENBRENNER

• Manufacturer: Senssenbrenner

Dimensions: length: 1200mm; width: 1800mm; height: 2550mm Usable dimensions: Ø970mm; Depth: 1600mm With teapot spout With planetary gearbox With heat protection

Moulding box, 3000mm x 3000mm x h. 800mm

With 4 crane eyes Weight: 2930kg

Moulding box, 2500mm x 2500mm x h. 600mm, 1900 kg/pc.

With 4 crane eyes

Moulding box, 2500mm x 2500mm x h. 400mm, 1350 kg/pc.

With 4 trunnions

Moulding box, 1800mm x 1800mm x h. 400mm, 1940 kg/pc.

With 4 trunnions With 2 round bushings Weight: 1940 kg