Test, Lab, Medical equipment » Materials Testing » Gauteng

Building Filters

270

Used Materials Testing in Gauteng, South Africa

  • Non-Nuclear Asphalt Density Gauge (UTAS-2160)

    Non-Nuclear Asphalt Density Gauge (UTAS-2160)

    • Manufacturer: Labequip

    Design and Testing of Bituminous Mixtures Description: Non-Nuclear Asphalt Density Gauge is used for determination of density of asphalt specimens with non-nuclear method. UTAS-2160 is equipped with a touch scree...

    Alberton, South Africa
  • Motorized & Manual Liquid Limit

    Motorized & Manual Liquid Limit Device (Casagrande) (UTS-0200B)

    • Manufacturer: Casagrande

    Soil Classification The UTEST Manual and Motorized Liquid Limit Apparatus (Casagrande) are used to determine the moisture content at which clay soils pass from plastic to liquid state. The Devices consist of an a...

    Alberton, South Africa
  • Sand Cone Sets (UTS-0950)

    Sand Cone Sets (UTS-0950)

    • Manufacturer: UTEST

    Compacted Road Base and Sub-base Soils Product Code: Description: The UTS-0950 and UTS-0960 Sand Cone Sets are used for the determination of the degree of compaction on site. UTS-0950 includes double cone, plasti...

    Alberton, South Africa
  • Buckling of bars (SE 110.57)

    Buckling of bars (SE 110.57)

    • Manufacturer: Labequip

    demonstration of buckling in bars Description: Long and slim components such as bars, beams and columns are often subjected to compressive forces along their long axis owing to their function. Under the influence...

    Alberton, South Africa
  • Verification of stress hypotheses (WP

    Verification of stress hypotheses (WP 130)

      verification of the Rankine yield criterion and the Tresca yield criterion Description: Stress hypotheses are applied in the science of the strength of materials when calculating comparative stresses where unequa...

      Alberton, South Africa
    • Demonstration of Euler buckling (WP

      Demonstration of Euler buckling (WP 121)

      • Manufacturer: Labequip

      demonstration of all buckling cases of Euler buckling Description: In stability theory, the four cases of Euler buckling represent the elastic flexural buckling of straight bars. Above a specific load – the buckl...

      Alberton, South Africa
    • Buckling behaviour of bars (WP

      Buckling behaviour of bars (WP 120)

      • Manufacturer: Labequip

      investigation of all relevant buckling problems Description: In engineering mechanics, loss of stability is known as buckling. The bar axis laterally deflects under the effect of compressive forces and with incre...

      Alberton, South Africa
    • Torsion of bars (SE110.29)

      Torsion of bars (SE110.29)

      • Manufacturer: Labequip

      elastic torsion of a bar under a torque Description: Torsion occurs primarily on axles and drive shafts in motor vehicles and machines. The torsion occurring in the shaft cause cross-sections of the shaft to be p...

      Alberton, South Africa
    • Investigation of simple stability problems

      Investigation of simple stability problems (SE 110.19)

      • Manufacturer: Labequip

      representation of simple stability problems on a buckling bar Description: Buckling is a stability problem which occurs in practice when slim components are subjected to compressive loading. Following a “disturba...

      Alberton, South Africa
    • Deformation of frames (SE 110.20)

      Deformation of frames (SE 110.20)

      • Manufacturer: Labequip

      principle of virtual work to calculate the deformation and support reaction in a statically indeterminate system Description: A frame is a bent beam with rigid corners which creates a so-called structure gauge. T...

      Alberton, South Africa
    • Hertzian pressure (TM 262)

      Hertzian pressure (TM 262)

      • Manufacturer: Labequip

      demonstration of the contact area under Hertzian pressure Description: When two bodies with a convex surface are pressed against each other, ideally, these bodies only come into contact linearly or at one or more...

      Alberton, South Africa
    • FULLY AUTOMATED CONSOLIDATION & SWELL

      FULLY AUTOMATED CONSOLIDATION & SWELL SYSTEM (LoadTrac III (Mini-LoadTrac)

      • Manufacturer: Geocomp Corp.

      Advanced Soil Systems ASTM D-2435 Incremental Consolidation AASHTO T-216 Incremental Consolidation ASTM D-4546 One dimensional swell or settlement potential of cohesive soils LoadTrac III system for incremental c...

      Alberton, South Africa
    • FULLY-AUTOMATED PERMEABILITY SYSTEM (LoadTrac II,

      FULLY-AUTOMATED PERMEABILITY SYSTEM (LoadTrac II, FlowTrac II)

      • Manufacturer: Labequip

      Advanced Soil Systems ASTM D-5084 – Flexible wall permeability ASTM D-2434 – Rigid wall permeability The LoadTrac II/FlowTrac II flow pump provides a unique and versatile way to run flexible wall permeability tes...

      Alberton, South Africa
    • FULLY-AUTOMATED RESILIENT MODULUS UNIT (LoadTrac

      FULLY-AUTOMATED RESILIENT MODULUS UNIT (LoadTrac II-RM)

      • Manufacturer: Geocomp

      Advanced Soil Systems Geocomp’s LoadTrac II Resilient Modulus unit fully automates resilient modulus tests on base/subbase/subgrade materials. The LoadTrac II meets or exceeds all specifications for Resilient Mod...

      Alberton, South Africa
    • FULLY-AUTOMATED CYCLIC TRIXIAL SYSTEM (LoadTrac

      FULLY-AUTOMATED CYCLIC TRIXIAL SYSTEM (LoadTrac II, FlowTrac II Cyclic)

      • Manufacturer: Labequip

      Advanced Soil Systems ASTM D-3999 Determination of the Modulus Properties ASTM D-5311 Load Controlled Cyclic Triaxial Testing of Soils The LoadTrac II/FlowTrac II Cyclic system automated test unit completely auto...

      Alberton, South Africa
    1112131415

    Overview

    Materials testing involves evaluating the properties and performance of materials under various conditions. This process helps ensure that materials used in construction, manufacturing, and other industries meet specific standards and can withstand intended applications. Common tests include tensile, compression, impact, and hardness testing.

    FAQ

    What should I consider when buying materials testing equipment?

    Consider the types of tests you need to perform, the materials you will be testing, and the equipment's accuracy, reliability, and compliance with industry standards.

    How do I ensure the materials testing equipment is shipped safely?

    Use a shipping company experienced with precision equipment. Ensure the equipment is properly packaged, secured, and insured during transit.

    What is the maintenance schedule for materials testing equipment?

    Regular maintenance includes calibration, cleaning, and inspection of components. Follow the manufacturer’s guidelines for detailed maintenance intervals and procedures.