Test, Lab, Medical equipment » Materials Testing » Gauteng

Building Filters

270

Used Materials Testing in Gauteng, South Africa

  • Sand Absorption (Abraham Cone) Sets

    Sand Absorption (Abraham Cone) Sets (UTA-0755)

    • Manufacturer: Labequip

    Mechanical and Physical Properties Product Code: The Sand Absorption Abraham Cone Set is used in determining the specific gravity and water absorption of fine aggregates smaller than 10 mm. The apparatus is manuf...

    Alberton, South Africa
  • Forces in a Howe truss

    Forces in a Howe truss (SE130)

      measurement of bar forces on a single plane truss, Howe type Description: As light-weight structures offering a high degree of rigidity, trusses are employed in the construction of halls, bridges, cranes, pylons ...

      Alberton, South Africa
    • Natural vibration on a ship

      Natural vibration on a ship model (HM 159.11)

        dynamic behaviour of a ship structure Description: Nowadays, experiment-based vibration analysis is an essential component in shipbuilding design and development. The HM 159.11unit helps students take their first...

        Alberton, South Africa
      • UTEST Software (USOFT-4830.FPR)

        UTEST Software (USOFT-4830.FPR)

        • Manufacturer: UTEST

        Compression Testing Frames Product Code: Description: The Automatic Compression/ Flexure Testing Machine can be controlled (Start, stop commands) by a computer with the software USOFT-4930.FPR (given free of char...

        Alberton, South Africa
      • Vebe Consistometer (UTC-0560E)

        Vebe Consistometer (UTC-0560E)

          Fresh Concrete Testing Product Codes: Description: UTC-0560E model consistometer conforms to EN 12350-3 for determining the consistency of fresh concrete by means of the Vebe time. The unit consists of a vibratin...

          Alberton, South Africa
        • FULLY-AUTOMATED SHEARTRAC III SYSTEM (ShearTrac

          FULLY-AUTOMATED SHEARTRAC III SYSTEM (ShearTrac III)

          • Manufacturer: Labequip

          Advanced Soil Systems ASTM D-5321 and D-6243 ASTM 3080/T236 BS 1377 The ShearTrac IIITM system is capable of performing the consolidation and shear- ing phases of a 305 mm x 305 mm (12 x 12 in. by 200mm(8.0 in) h...

          Alberton, South Africa
        • RSI-ShearTrac-II (RSI-ShearTrac-II)

          RSI-ShearTrac-II (RSI-ShearTrac-II)

            Classification Tests Product Code: RSI-ShearTrac-II / 13 kN (3,000 lbs.) frame capacity Description: The Rock Shear Interface (RSI) is a versatile system capable of performing the consolidation and shearing phase...

            Alberton, South Africa
          • Lower and Upper Platens (UTC-4511)

            Lower and Upper Platens (UTC-4511)

            • Manufacturer: Labequip

            Compression Testing Frames Product Code: Descriptions: The platens enable the testing of a wide variety of cylinder, cube, blocks or similar specimens. Manufactured from high quality steel, which is then hardened...

            Alberton, South Africa
          • Beam Moulds (UTC-0830)

            Beam Moulds (UTC-0830)

            • Manufacturer: Labequip

            Hardened Concrete Testing Product Codes: Description: Steel beam moulds are manufactured in accordance with dimensions and tolerances stated in the related standards. Due to the continuous development of our prod...

            Alberton, South Africa
          • Advanced & Rugged Leeb Hardness

            Advanced & Rugged Leeb Hardness Tester (LES-THL-280PLUS)

              Converts to all common hardness scales (HV, HB, HRC, HRB, HRA, HS) Measuring range: 170~960 HLD (Impact device dependant) Accuracy: Display error ±4 HLD Conversions: HLD -HRC – HRB – HB – HV – HS Includes impact ...

              Alberton, South Africa
            • Aggregate Crushing Value (ACV) Sets

              Aggregate Crushing Value (ACV) Sets (UTA-0630)

              • Manufacturer: Labequip

              Mechanical and Physical Properties Product Code: The Aggregate Crushing Value (ACV) Test Set provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. E...

              Alberton, South Africa
            • Poker Vibrator (UTC-0928)

              Poker Vibrator (UTC-0928)

              • Manufacturer: Labequip

              Hardened Concrete Testing Product Codes: Description: The Poker Vibrator is ideal for the internal compaction of concrete specimens and a good alternative to traditional tamping bar, especially when there are lar...

              Alberton, South Africa
            • Digital Rebar Pull-Out Force Tester

              Digital Rebar Pull-Out Force Tester (UTC-3190)

              • Manufacturer: Labequip

              Protection and Repair of Concrete Structures (NDT) Hardened Concrete Testing Product Codes: Description: The Apparatus are used for determining the bond strength between anchored reinforcing steel bar (rebar) and...

              Alberton, South Africa
            • Concrete Pocket Penetrometer (UTC-0715)

              Concrete Pocket Penetrometer (UTC-0715)

                Fresh Concrete Testing Description: The UTC-0715 is designed for the determination of initial setting time of fresh concrete for field and laboratory use. Stainless steel plunger has 32.3 mm² (1/20 in²) area and ...

                Alberton, South Africa
              • Cylinder Moulds (UTC-0842)

                Cylinder Moulds (UTC-0842)

                • Manufacturer: Labequip

                Hardened Concrete Testing Product Codes: Description: Hard plastic and steel cylinder moulds are manufactured in accordance with dimensions and tolerances stated in the related standards. Two part and clamp attac...

                Alberton, South Africa
              1415161718

              Overview

              Materials testing involves evaluating the properties and performance of materials under various conditions. This process helps ensure that materials used in construction, manufacturing, and other industries meet specific standards and can withstand intended applications. Common tests include tensile, compression, impact, and hardness testing.

              FAQ

              What should I consider when buying materials testing equipment?

              Consider the types of tests you need to perform, the materials you will be testing, and the equipment's accuracy, reliability, and compliance with industry standards.

              How do I ensure the materials testing equipment is shipped safely?

              Use a shipping company experienced with precision equipment. Ensure the equipment is properly packaged, secured, and insured during transit.

              What is the maintenance schedule for materials testing equipment?

              Regular maintenance includes calibration, cleaning, and inspection of components. Follow the manufacturer’s guidelines for detailed maintenance intervals and procedures.