Used Machine Tools in Saxony, Germany

RSF ELECTRONIC length measuring system

length measuring system RSF ELECTRONICS MSA6706 83577408 approx. 0.6 m connecting cable Spare part, etc. for Machining Center MAZAK AJV25 /405 ! Used!

HEIDENHAIN length measuring system

length measuring system HEIDENHAIN LS486C ID 329 991-22 approx. 1.5 m connection cable Spare part, etc. for Machining Center HECKERT CWK400 D! Used, checked !

PAULSTRA all-metal damper

• Manufacturer: PAULSTRA

All-metal damper, machine foot, leveling footset, vibration isolator PAULSTRA V1H752-11 Material (all-metal cushioning pad) CrNi steel wire All-metal damper set consists of 4 feet! Used!

TARGET PRECISION micro drill

• Manufacturer: TARGET PRECISION

Micro drill, head drill, drill, 10 pieces TARGET PRECISION Series 150 Other quantities on request! New! Â

TARGET PRECISION micro drill

• Manufacturer: TARGET PRECISION

Micro drill, head drill, drill, 16 pieces TARGET PRECISION Series 150 Other quantities on request! New!

HAM PRECISION micro drill

• Manufacturer: HAM PRECISION

Micro drill, head drill, drill, 33 pieces HAM PRECISION Ã 0.50 x 8.0 mm Other quantities on request! New!

WMW AW1000x800x640

• Manufacturer: WMW

clamping surface is roughly machined good used condition, slight traces of use T-slots according to DIN 650: a=28mm; b=49mm; c=21mm; h=50mm distance T-slot : T-slot= 160mm

J+P pneumatic punch

Pneumatic punch press J+P, JAGOW + PFEIFER GmbH STZ-KO Used, tested!

VAN MARK cooling slot punch

Cooling slit punch, Slit punch, Hand lever punch VAN MARK PRODUCTS CORPORATION TRIM-A-LOUVER used, tested !

WMW AW 330x310

• Manufacturer: WMW

Application: Machine table adjustable clamping angle with 3 T-slots according to DIN 650: a=17; H027; b=32; c=14mm distance 100mm swivelling via tooth guide +90° rotatable 360° Base Ø 350mm with 2x clamping groov...

HELLER chip conveyor

• Manufacturer: Heller

Chip conveyor HELLER type BEA 05 Drive motor: 0,3 kW 9.0 rpm 220 / 380 V 3AC, 50 Hz Coolant pump1: Q: 250 l/min, H: 13 m 1.7 kW 2850 rpm 230 / 400 V 3AC 50 Hz Coolant pump2: Q: 100 l/min, H: 2 m 0.24 kW 2750 rpm ...

Emag VCL 630/800

• Manufacturer: Emag

VERTICAL MULTIFUNCTIONAL HEADSTOCK UNIT FOR VLC 800 MT TURNING MILLING (see last photo for comparison) The headstock unit of the EMAG machines of the VLC series is characterised by short strokes, high rapid trave...

IND-SPHINX® micro drill

• Manufacturer: Pagus

Micro drill, drill, 10 pieces IND-SPHINX® PRECISION LIMITED Type 100 10000023000900000 Ã2.30x9.00mm Other quantities on request! New!

JFA clamping box

• Manufacturer: JOHANN FISCHER ASCHAFFENBURG

Clamping box, clamping cube, clamping angle, box angle JFA, JOHANN FISCHER ASCHAFFENBURG PRECISION TOOLS 1500x250x250mm all slots Ø 41 x 80 mm 4 chambers 355 x 220 x 235 mm Used!

IND-SPHINX® micro drill

• Manufacturer: IND-SPHINX

Micro drill, drill, 12 pieces IND-SPHINX® PRECISION LIMITED Type 3835 ( D835 ) D8350026001050000 Ã2.60x10.50mm New!