Used Machine Tools in Saxony, Germany

WMW milling head

• Manufacturer: WMW

Milling head , Drilling head , Angle head WMW, WEMA Engelsdorf UA1 Rotatable 360° in two levels Hollow shaft (drive): Ø 28 mm, wedge width: 6 mm used, checked!

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

GÜHRING sealing plug

• Manufacturer: Guhring

Sealing plugs, 6 pieces GÃHRING GM300 4985 63,000 16136705 used, tested!

1994 WMW 620x160

• Manufacturer: WMW

4 jaws faceplate flange intake/diameter : passage drill hole 160 mm flange diameter 197mm hole circle 235mm jaws are single guided with chuck key The given info are approx. values!

nicht bekannt MP 400x260

• Manufacturer: nicht bekannt

DIRECT CURRENT MAGNET Magnet core 8 pieces width x distance: 40 x 45mm

Narex und Septhel MP 160

• Manufacturer: Narex und Septhel

Origin Germany Weight 10kg Ø 160mm x 90mm magnetic core 3 pieces, W: 20mm; distance: 36mm

WMW AW 190x335x200

• Manufacturer: WMW

Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Table length: mm | Table width: mm | Table load: t | Width: 190 mm | Depth: 200 mm | Height: 335 mm | Weight of...

WMW AW 400x450x985

• Manufacturer: WMW

1 piece T-slot to DIN 650: T-slot width a=28; h= 42; b= 47; c= 19.5 mm, T-slot spacing 160 mm Foot clamping with slotted hole Ø 22 x 300 mm

WMW AW 190x315x500 (Nr.16)

• Manufacturer: WMW

1 piece in the back of the photo T-slot to DIN 650: T-slot width a= 28; h= 42; b= 47.5; 19.5 mm, T-slot spacing 160 mm

WMW AW 500x260x795 (Nr. 20+21)

• Manufacturer: WMW

2 pieces available (price per piece) without T-slots Foot clamping slotted hole Ø 39 x 130 mm

Binder MPS 800x315

• Manufacturer: Binder

Magnetic clamping plate Magnetic strips 18x, width 20mm, distance 40mm

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 used, tested!

GESAU drill

• Manufacturer: Pagus

Stepped drill with internal cooling GETTING (Ø14,5x23,5 /120 ° x25x110) with internal cooling! unused!

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chucks, three-jaw chucks, power chucks, wedge hook chucks WMW ( DKRDA250x3 ) Jaws individually adjustable by toothing ! with accessories ! used, tested !