Used Lathes in Saxony, Germany

Oerlikon DMO 8 lathe

• Manufacturer: Oerlikon - Leybold
• Spindle bore: 45 mm

Lead and feed screw turning machine Oerlikon DMO 8 incl. extensive accessories ! used, tested !

Lathe CU 800 - CU 1250

Swing diameter over bed [mm]: 890 - 1320 Center distance [mm]: 1500 - 6000 Spindle bore [mm]: 155 Main drive [kW]: 22 (30) Swing diameter over support [mm]: 490 - 940 Speed range [rpm]: 6.3 - 1250 (5-1000) Equipm...

Lathe - cycle-controlled Colchester Harrison Harrison Alpha

• Manufacturer: Colchester

Swing diameter over bed [mm]: 350 - 760 Center distance [mm]: 650 - 6000 Swing diameter over support [mm]: 196 - 460 Spindle bore [mm]: 42 - 155 Speed range [rpm]: 366-3500 / 150-1400 Main drive [kW]: max 18.5 Eq...

Center point for lathes #10551

accompanying unused Made in Germany center point, center punch point, turning point for lathe center punch point Manufacturer: Length approx. 260 mm , diameter approx. 90 mm , weight approx. 4,5 kg Changes and er...

Turning machine, infinitely variable CU 400MRD - CU 730RD

Swing diameter over bed [mm]: 440 - 730 Spindle bore [mm]: 72 - 103 Center distance [mm]: 1000 - 5000 Main drive [kW]: 11 Swing diameter over support [mm]: 240 - 500 Speed range [rpm]: 25-2000 ( 16-1250) Equipmen...

Turning machine, infinitely variable CU 800RD - CU 1250RD

Swing diameter over bed [mm]: 890 - 1320 Center distance [mm]: 1500 - 10000 Spindle bore [mm]: 155 Main drive [kW]: 30 Swing diameter over support [mm]: 490 - 940 Speed range [rpm]: 3.7 - 1000 Equipment / accesso...

Three jaw chuck jaw chuck f. lathe or vice 200mm #25155

outside Ø 200 mm inside Ø 50 mm height 80 mm only the shown jaws available Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Tool holder for lathes and planes #B15615

Tool holder, workpiece holder, support used Manufacturer unknown Tool holder, workpiece holder, support for machine tools used angle adjustable Changes and errors in the technical data, specifications and prices ...

Tool holder for lathes and planes #B15616

Tool holder, workpiece holder, support used Manufacturer unknown Tool holder, workpiece holder, support for machine tools used angle adjustable Changes and errors in the technical data, specifications and prices ...

Steel holder for lathes and planes #B15617

Steel holder, tool holder, workpiece holder, support used Manufacturer unknown Steel holder, turning tool holder, tool holder, workpiece holder, support for machine tools used angle adjustable Changes and errors ...

Spare parts for lathes FAT, WAFUM, PONAR, Poland TUR, TUD, TUM

• Manufacturer: TuR

for example Clutch plates and clutches, V-belt pulleys, gear parts, gears, spindles

Spare parts for lathes Stankoimport, Krasnij Proletariy, Efremow 16K20

• Manufacturer: Stankoimport

for example Clutch plates and clutches, V-belt pulleys, gear parts, gears, spindles

1954 VDF WOHLENBERG VDF

• Manufacturer: Wohlenberg
• Model: VDF
• Spindle bore: 80 mm

Type of control: Konventionell | Control: n/a | Machine-no.: 27XXX | Turning length: 4000 mm | Spindle diameter: Ø 80 mm | Faceplate speeds i: 355 RPM | Turning diameter over cross slide: Ø 1000 mm | Max. turnin...

1957 VDF W 40

• Manufacturer: VDF - Boehringer

Type of control: Konventionell | Machine-no.: 030XXXX | Turning diameter: Ø 960 mm | Turning length: 4500 mm | Spindle speeds: Ø 105 RPM | Turning diameter over cross slide: Ø 600 mm

1970 VDF BOEHRINGER T 11

• Manufacturer: VDF - Boehringer
• Spindle bore: 750 mm

Type of control: Konventionell | Control: n/a | Machine-no.: 40XXX | Turning diameter: Ø 700 mm | Turning length: 3000 mm | Spindle diameter: Ø 750 mm | Spindle bore: 70 mm | Swing diameter over cross slide: Ø 4...