Used Lathes in Saxony, Germany

PAGUS rotary table for lathe chuck

• Manufacturer: Pagus

Rotary table for lathe chuck PAGUS 360 ° rotatable Used!

PAGUS lathe chuck

• Manufacturer: Pagus

3-jaw chuck, three-jaw chuck PAGUS Outer Ø: 200mm Flange: 155 mm | Bolt circle: 174 mm | Height with jaws: 100 mm | Bore: 55 mm | Square for key: 11.5 mm | Dimensions: 200 x 100 mm

WMW lathe chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH-B 200x3x6 (DH-B200x3x6) TGL 30-2332 Used!

PAGUS lathe chuck

• Manufacturer: Pagus

3-Jaw Chuck, Three-Jaw Chuck with External Jaws PAGUS Short Taper with 3 Additional External Jaws with Wrench Used, Tested!

WMW lathe chuck

• Manufacturer: WMW

4-jaw chuck, four-jaw chuck WMW, ROTO RECORD with second jaw set! Used!

FORKARDT lathe chuck

3-jaw chuck, three-jaw chuck, power chuck, wedge-bar chuck FORKARDT F 160 with 2 additional sets of jaws and a basic jaw set ! Used!

WMW lathe chuck

• Manufacturer: WMW

3-jaw chucks, three-jaw chucks, power chucks, wedge hook chucks WMW ( DKRFB/8-250x3 ) Jaws individually adjustable by toothing ! used, tested !

PAGUS lathe chuck

• Manufacturer: Pagus

3-jaw chuck, three-jaw chuck PAGUS with second set of jaws ! used, tested !

WMW lathe chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH475x3-III TGL 30 2332 max. 800 rpm used, tested !

WMW NILES lathe chuck

• Manufacturer: Niles

3-jaw chuck, three-jaw chuck, lathe chuck WMW NILES Outer Ø: 250mm 2400 rpm with cross taper and camlock D1- 8 inches (Stud M 16) 2 sets of jaws (1x drilling 1x rotating jaw set) 1 feed key

PERTHEL lathe chuck

3-jaw chuck, three-jaw chuck Perthel Used! Outer ø: 190 mm | Bolt circle ø: 116 mm | Bore ø: 56 mm | Height with jaws: 112 mm | Dimensions: 190 x 190 x 115 mm

PAGUS lathe chuck

• Manufacturer: Pagus

3-jaw chuck, three-jaw chuck PAGUS Outside ø: 250 mm | Bolt circle ø (chuck): 230 mm | Bore ø: 80 mm | Height with jaws: 140 mm | Dimensions: 250 x 250 x 140 mm

WMW lathe chuck

• Manufacturer: WMW

4-jaw chuck, four-jaw chuck WMW, ROTO RECORD Used!

FORKARDT lathe chuck

3-jaw chuck, three-jaw chuck, power chuck, wedge-bar chuck FORKARDT F160 with 3 additional jaw sets ! Used!

PAGUS lathe chuck

• Manufacturer: Pagus

3-jaw chuck, three-jaw chuck PAGUS Was used on a Toyoda HES52 with many accessories ! used, checked !