- Trusted Seller
Impact hardness tester with microscope HK ENGELHART
used
- Manufacturer: HK ENGELHART
Dimensions: Lenght:185mm; Width: 140mm; Hight: 75mm 1×Poldi (Hardnesstester) und Ducongerät (×20) (microscope) in wooden box +instruction de service
Amel, Belgium - Trusted Seller
Impact hardnesstester (H&K) with magnifier
used
- Manufacturer: Hahn&Kolb Gruppe
Dimensions box: Lenght: 175mm; Width: 70mm; Hight: 60mm tester with ball, reference stick and magnifying glass list in the analysis guide For steel, aluminium, bronze, cast iron, rolled cooper, cast brass and rol...
Amel, Belgium - Trusted Seller
Hardness tester WOLPERT, type Dia-Testor 2RC
used
Mounted on table Dimensions with table: width 800mm, depth 750mm, height 1800mm Dimensions without table: width 400mm, depth 620mm, height 950mm Pressure from 1 kg up to 250 kg Usable for VICKERS, BRINELL and ROC...
Amel, Belgium - Trusted Seller
Impact hardness tester ERNST
used
- Manufacturer: Ernst
1 set with many calibrated shear pins Weight: 10 kg
Amel, Belgium - Trusted Seller
Hardness tester FRANK 532
used
- Manufacturer: Frank
Dimension: width 210mm, depth: 610 mm, height: 1000mm pression from 1 up to 250 Kp bowl Ø 2,5 and 5 mm Table moving by hand, using height max. 260mm with digital indicater for direct lecture
Amel, Belgium - Trusted Seller
Box with calibration plate for hardness tester UKAS CALIBRATION
used
With certificate Weight: 5 kg | External dimensions: 275 mm x 235 mm | Useful dimensions: 150 mm x 125 mm
Amel, Belgium - Trusted Seller
1999 Automatic hardness tester REICHERTER STIEFELMEYER
used
Type: Briviskop BFU2, serial number: 7800010 Construction year: 1999, Weight: ± 2000 kg With multifunctional screen With automat SIEMENS-SIMATIC S5 - 100 V With ball Ø 10 mm, (HBR) Head adjustable in all directio...
Amel, Belgium - Trusted Seller
1988 Hardness tester REICHERTER-AUTOMATION 3000 D
used
Type: BRIVISKOP 3000D, serial number: 1.609.015.049 Construction year: 1988, weight: 800 kg With HB balle Ø 5 mm, capacity 750 kg Reading on disk With adjustable ruler Height and depht adjustement by switch press...
Amel, Belgium - Trusted Seller
Hardness tester WILSON ROCKWELL
used
- Manufacturer: Wilson Rockwell
220 V mono, 50 Hz Type: S500, model: B524R, serial number: B146309 With digital display Minor-load display Major-load display Penetration display RS232 connection Printer interface
Amel, Belgium - Trusted Seller
Hardness tester for sand, portable
used
- Manufacturer: A.B. ALPHA
In a wooden case Old mecanic system Weight: ± 8 kg | Outside dimensions: 235 mm x 180 mm, h. 85 mm
Amel, Belgium - Trusted Seller
Hardness tester REICHERTER BRIVISCOP 3000 D
used
Type: BRIVISCOP 3000D, serial number: 80696 Motor: Type: DN80B/4, serial number: 1208448, 0,75 kW, 1410 rpm, 220/380 V With ball Ø 5 mm Capacity 750 kg Reading on disk With adjustable ruler, pressure release by p...
Amel, Belgium - Trusted Seller
Wet strength tester for clay bonded sand GF
used
- Manufacturer: GF
For determining the water resistance of clay-bound sand up to 0.6 N/cm² With heating up to 300 °C With sleeve, ring and base
Amel, Belgium - Trusted Seller
Polisher grinder STRUERS, Ø 200mm
used
- Manufacturer: Struers
- Model: LaboPol
Dimensions: Length: 650mm; Width: 400mm; Height: 300mm 220V, 50Hz Wet grinding possible Speed adjustable from 50-500rpm
Amel, Belgium - Trusted Seller
2000 Double samples polisher STRUERS
used
- Manufacturer: Struers
- Model: LaboPol
Suitable for wet grinding Dimensions: Length: 700mm; Width: 690mm; Height: 220mm Ø disc 245mm; 2 discs 1 speed
Amel, Belgium - Trusted Seller
Hardnesstester WOLPERT DIA TESTOR 2RC
used
Type : DIA TESTOR 2RC, serial no. : 3354 In good conditions With a lot of special accessories weight +- 200 kg
Amel, Belgium
Tip: Enter manufacturer, model or keyword
