- Trusted Seller
Tensile testing machine MOHR&FERDERHOFF 20t
used
- Manufacturer: Mohr
Brand: Type: UPD20 Traction machine dimensions: length: 1100mm; width: 1300mm; height: 2500mm Hydraulic dimensions: length: 700, width: 800mm; height: 1800mm With 2 chuck and sample boxes With extensometer With h...
Amel, Belgium - Trusted Seller
2015 Cutter for test samples STRUERS
used
- Manufacturer: Struers
- Model: Discotom-10
Dimensions: width 1050mm, depth 940mm, height 680mm (lever 860mm) For cutting discs Ø 230 x 2mm, bore Ø 32mm With pneumatically activated plexiglas protection cover With original metal underbench STRUERS With wat...
Amel, Belgium - Trusted Seller
Mobile Hardnesstester for Interiors/ borings EMCO-TEST ROCKWEL
used
- Manufacturer: Emco
Dimensions: Lenght: 550mm; Witdh: 140mm; Height: 90mm manual indication load level 625HRC The reading after measure is taken from dial gauge in HRC With Diamant and spring joint
Amel, Belgium - Trusted SellerAmel, Belgium
- Trusted Seller
1968 Tensile testing machine WOLPERT W30, 30 t
used
With hydraulic unit Useful dimensions (hydraulic block): 1120 mm x 720 mm, h. 1660 mm Older version, in very good condition Without sample clamping system
Amel, Belgium - Trusted Seller
New sand strength tester GF PFG
used
- Manufacturer: Simpson
Year of construction 2023 Dimensions: Length: 613mm; Width: 220mm; Height: 355mm With pressure gauge for reading Basic device equipped with jaws for pressure test Serie Year 2023 Accessories can be sold separate...
Amel, Belgium - Trusted Seller
Wet strength tester for clay bonded sand GF
used
- Manufacturer: GF
For determining the water resistance of clay-bound sand up to 0.6 N/cm² With heating up to 300 °C With sleeve, ring and base
Amel, Belgium - Trusted Seller
Polisher grinder STRUERS, Ø 200mm
used
- Manufacturer: Struers
- Model: LaboPol
Dimensions: Length: 650mm; Width: 400mm; Height: 300mm 220V, 50Hz Wet grinding possible Speed adjustable from 50-500rpm
Amel, Belgium - Trusted Seller
2000 Double samples polisher STRUERS
used
- Manufacturer: Struers
- Model: LaboPol
Suitable for wet grinding Dimensions: Length: 700mm; Width: 690mm; Height: 220mm Ø disc 245mm; 2 discs 1 speed
Amel, Belgium - Trusted Seller
Hardnesstester WOLPERT DIA TESTOR 2RC
used
Type : DIA TESTOR 2RC, serial no. : 3354 In good conditions With a lot of special accessories weight +- 200 kg
Amel, Belgium - Trusted Seller
Sand strength tester SIMPSON
used
- Manufacturer: Simpson
Dimensions: Length: 250mm; Width: 450mm; Height: 320mm 110/220V, 1 phase, 50Hz, 2A Suitable for: With accessories for shear strength
Amel, Belgium - Trusted Seller
Samples polishing unit 1 disc
used
- Manufacturer: Struers
Dimensions: length: 720mm, width: 480mm; height: 400mm Adjustable up to 1500 rpm by speed regulator
Amel, Belgium - Trusted Seller
Double samples polisher STRUERS
used
- Manufacturer: Struers
For wet sanding Dimensions: Length: 730mm; width: 685mm; height: 200mm Ø Plate 230mm; 2 plates
Amel, Belgium - Trusted Seller
Electronic scratch hardness tester GF
used
- Manufacturer: GF
This instrument is used to determine the scratch hardness of a mould or core. The instrument contains an eight-point cutter which, when rotated, penetrates a finished core or mould surface. The depth of penetrati...
Amel, Belgium - Trusted Seller
Mobile microscop for Impact hardness tester; ×40,
used
- Manufacturer: SHK-Ducon
Diamension: Lenghte: 200mm; Depth: Ø40mm Interval dimension, precision until 0,02mm
Amel, Belgium
Tip: Enter manufacturer, model or keyword
