Used Materials Testing in Gauteng, South Africa

FULLY-AUTOMATED CYCLIC TRIXIAL SYSTEM (LoadTrac II, FlowTrac II Cyclic)
- Manufacturer: Labequip
Advanced Soil Systems ASTM D-3999 Determination of the Modulus Properties ASTM D-5311 Load Controlled Cyclic Triaxial Testing of Soils The LoadTrac II/FlowTrac II Cyclic system automated test unit completely auto...
Alberton, South Africa
FULLY AUTOMATED UNCONFINED COMPRESSION SYSTEM (LoadTrac II)
- Manufacturer: Labequip
Advanced Soil Systems ASTM D-2166, AASHTO T-208 Unconfined Compression Testing of Soils ASTM D-1663 Compressive Strength of Moulded Soil-Cement Cylinders Description: The LoadTrac II load frame provides compressi...
Alberton, South Africa
Capping Retainers (UTC-0372A)
- Manufacturer: Labequip
Compression and Flexural Testing Machines Product Code: Description: Unbounded Cap is used for determining of compressive strength of hardened concrete cylinders as alternative method to the sulphur hot capping o...
Alberton, South Africa
V Funnel (UTC-0540)
- Manufacturer: UTEST
Fresh Concrete Testing Description: The UTC-0540 V Funnel apparatus is used to evaluate the flow time of freshly mixed self-compacting concrete. The test is not suitable when the maximum size of the aggregate exc...
Alberton, South Africa
Vibrating Compaction Hammer (UTC-0944)
- Manufacturer: Labequip
Hardened Concrete Testing Product Codes: Description: UTC-0944 Vibrating Compaction Hammer with the shank and tamping plate is used for moulding cylindrical test specimens which are used for testing compressive o...
Alberton, South Africa
Skid Resistance and Friction Tester (UTA-0830/E)
- Manufacturer: Labequip
Mechanical and Physical Properties Product Code: The Skid Resistance and Friction Tester is used for the measurement of surface friction properties. The apparatus is suitable for both site and laboratory applicat...
Alberton, South Africa
ATOMIC 2000KN CONCRETE CUBE PRESS COMPLETE WITH CONTROLLER (LESC001)
- Manufacturer: Atomic
The Atomic Concrete Cube Press frames for concrete cubes consist of a rigid four column frame. Our frames provide the stability needed for accurate and repeatable test results, over the years of operation. The fr...
Alberton, South Africa
J-Ring, Narrow Gap, EN (UTC-0520E)
- Manufacturer: Labequip
Fresh Concrete Testing Product Codes: Description: The J-Ring Test is used for determining the passing ability, the flow spread and the t500Jflow time of self-compacting concrete as the concrete flows through the...
Alberton, South Africa
Universal Cutting Machines (UTC-1020)
- Manufacturer: Labequip
Hardened Concrete Testing Product Codes: Description: The UTC Series Universal Cutting Machine has been developed to cut and prepare concrete, rock or natural stone cores or other type test specimens. Special cla...
Alberton, South Africa
Digital Bond Strength /Pull-off Tester (UTC-3250)
Protection and Repair of Concrete Structures (NDT) Hardened Concrete Testing Description: 16 kN measurement capacity apparatus is used for determining of bond/pull-off strength of repair mortar, hardened renderin...
Alberton, South Africa
Bleeding of Freshly Mixed Concrete (UTC-0720)
- Manufacturer: Labequip
Fresh Concrete Testing Description: UTC-0720 is used for determination of the relative quantity of mixing water that will bleed from a sample of freshly mixed concrete. Due to the continuous development of our pr...
Alberton, South Africa
Flow Cone Apparatus (UTCM-0700E)
- Manufacturer: Labequip
Compression and Flexural Machines Product Code: Description: UTCM-0700E Flow Cone Apparatus is used for determining the flow properties of grouts, mortars, muds and other fluid materials. The Flow Cone Apparatus ...
Alberton, South Africa
CBR Mould and Accessories BS (CBR Mould and Accessories BS)
- Manufacturer: Labequip
Compacted Road Base and Subbase Soils Each accessory listed below should be ordered separately. internal height: 127mm, supplied complete with extension collar and solid base plate 200x200x450 mm 8.5 kg (*) C-spa...
Alberton, South Africa
U Shape Box Apparatus (UTC-0547)
- Manufacturer: Labequip
Fresh Concrete Testing Description: The UTC-0547 U Shape Box Apparatus is used to determine the filling and passing ability of self-compacting concrete (SCC). The U box is made of stainless-steel consisting of th...
Alberton, South Africa
Compressometer-Extensometer (UTC-0303)
- Manufacturer: Labequip
Compression and Flexural Testing Machines Product Codes: Description: Concrete Compressometers are used to determine the deformation (both axial and diametrical) of concrete cylinder or cube specimens during the ...
Alberton, South Africa