Used Materials Testing in Gauteng, South Africa

Digital Rebar Pull-Out Force Tester (UTC-3190)

• Manufacturer: Labequip

Protection and Repair of Concrete Structures (NDT) Hardened Concrete Testing Product Codes: Description: The Apparatus are used for determining the bond strength between anchored reinforcing steel bar (rebar) and...

Poker Vibrator (UTC-0928)

• Manufacturer: Labequip

Hardened Concrete Testing Product Codes: Description: The Poker Vibrator is ideal for the internal compaction of concrete specimens and a good alternative to traditional tamping bar, especially when there are lar...

Concrete Pocket Penetrometer (UTC-0715)

Fresh Concrete Testing Description: The UTC-0715 is designed for the determination of initial setting time of fresh concrete for field and laboratory use. Stainless steel plunger has 32.3 mm² (1/20 in²) area and ...

Cylinder Moulds (UTC-0842)

• Manufacturer: Labequip

Hardened Concrete Testing Product Codes: Description: Hard plastic and steel cylinder moulds are manufactured in accordance with dimensions and tolerances stated in the related standards. Two part and clamp attac...

Density (Unit Weight) Measure (UTC-0603E)

• Manufacturer: Labequip

Fresh Concrete Testing Product Codes: Description: Density (Unit Weight) Measures are used to determine the weight per cubic meter of freshly mixed and compacted concrete. Manufactured from heavy gauge steel comp...

Cube Moulds (UTC-0810)

• Manufacturer: Labequip

Hardened Concrete Testing Product Codes: Description: Cast iron and hard plastic moulds are manufactured in accordance with dimensions and tolerances stated in the relevant standard. Four-part body and attached t...

Fundamentals of mechanical friction (TM200)

• Manufacturer: Labequip

stationary friction body, uniformly moving friction plate Description: The unit provides fundamental experiments on static and dynamic friction. Two solid bodies are moved against each other in a uniform manner. ...

Length Change (Shrinkage And Expansion) (UTCM-0029E)

• Manufacturer: Labequip

Physical and Chemical Properties Product Code: Description: The moulds are used for preparing the specimens for the purpose of determining the length changes (shrinkage/expansion) in hardened hydraulic cement mor...

Small Curing Tanks (UTC-0965)

• Manufacturer: Labequip

Hardened Concrete Testing Product Codes: Descriptions: The UTC-0965 Steel and UTC-0970 Polyurethane Small Curing Tanks are designed for curing concrete cubes and cylinders. The temperature can be adjusted to the ...

Micro-Deval Apparatus ASTM (UTA-0620A-T)

• Manufacturer: Labequip

Mechanical and Physical Properties Product Code: The Micro Deval Testing Machine is used to determine the resistance to wear of aggregates. The machine consists of a steel frame, two stainless steel jar stainless...

Distance Pieces and Pedestal (UTC-4630)

• Manufacturer: UTEST

Compression Testing Frames Product Code: Description: Distance pieces are used to reduce the amount of vertical clearance between the upper platen and the lower platen. For lowering the minimum distance between u...

Torsion of bars (SE110.29)

• Manufacturer: Labequip

elastic torsion of a bar under a torque Description: Torsion occurs primarily on axles and drive shafts in motor vehicles and machines. The torsion occurring in the shaft cause cross-sections of the shaft to be p...

Investigation of simple stability problems (SE 110.19)

• Manufacturer: Labequip

representation of simple stability problems on a buckling bar Description: Buckling is a stability problem which occurs in practice when slim components are subjected to compressive loading. Following a “disturba...

CBR Mould and Accessories BS (CBR Mould and Accessories BS)

• Manufacturer: Labequip

Compacted Road Base and Subbase Soils Each accessory listed below should be ordered separately. internal height: 127mm, supplied complete with extension collar and solid base plate 200x200x450 mm 8.5 kg (*) C-spa...

Small Surface Roughness Tester (LESMSR160)

LESMSR160 Portable Roughness Tester is a new pocket-sized portable surface roughness tester. It has high measurement accuracy characteristics. It can be used in detection of various metal and non-metal surfaces. ...