Used Electrical Test Instruments in Gauteng, South Africa

Coupling Decoupling Network M4

The TBCDN-M4 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M4 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...

Coupling Decoupling Network M2

The TBCDN-M2 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M2 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...

TESCA Sequential Logic Tutor

The Electronic Sequencer is intended for elementary as well as advance training of digital electronics. The trainer cover regular digital circuits by solder less inter connections through use of 4 mm brass termin...

Dummy Load (-105dBc) Connector: N-M

Dummy Load (-105dBc) Frequency: DC-3GHz | Power: 5W | Connector: N-M

Chauvin Arnoux C.A 732 Non-contact voltage tester CAT III 1000 V LED

• Manufacturer: Chauvin Arnoux

Grandway FHP3P05 | 10G PON Power Meter

Items: Specifications | Wavelength: 1270nm(burst) | Test range(dbm): 10～-40 | Spectral passband(nm): 1310±50 | Isolation: 1577nm＞40dB | Insertion loss: ≤1.5dB | Uncertainty: ≤0.5dB | Resolution: 0.01dB | Threshol...

TBMR-110M EMI-ANALYZER DC-110 MHZ

• Manufacturer: EMI

International EMC Standards require various spectrum measurement methods and equipment to ensure that the EUT´s electromagnetic emissions do not exceed the specified limits. The TBMR-110M EMI Analyzer is designed...

TESCA Synchronization Panel Trainer

46622 in industry loads are directly connected to the source through an isolation switch. But when the load demand is increased and the source capacity is less, another source is connected in parallel so that bot...

Dummy Load (-105dBc) Connector: N-F

Dummy Load (-105dBc) Frequency: DC-3GHz | Power: 5W | Connector: N-F

Dummy Load (-105dBc) Connector: DIN-M

Dummy Load (-105dBc) Frequency: DC-3GHz | Power: 5W | Connector: DIN-M

Chauvin Arnoux CA745, LED Voltage Indicator, 690V ac/dc, Continuity Check, Mains Powered, CAT III 600 V

• Manufacturer: Chauvin Arnoux

Maximum voltage: 690V ac/dc | Continuity check: Yes | Safety category: CAT III 600 V | Display type: LED | Power source: Mains | Dimensions: 47 x 36 x 193mm | Weight: 170g | Height: 193mm | Length: 47mm | Maximu...

Chauvin Arnoux CA6608 Phase Rotation Tester

• Manufacturer: Chauvin Arnoux

ALL-TEST PROTM 31

• Manufacturer: ALL-TEST PRO

A PERFECT TOOL FOR TROUBLE SHOOTING,START-UP & QUALITY CONTROL OF AC/DC ELECTRIC MOTORS, GENERATORS OR TRANSFORMERS

ALL-TEST PROTM IV 2000

• Manufacturer: ALL-TEST PRO

Motor Circuit Analyzer PREDICTIVE MAINTENANCE QUALITY CONTROL TROUBLE SHOOTING

Motor Circuit AnalyzerPREDICTIVE MAINTENANCE QUALITY CONTROL TROUBLE SHOOTING

The ALL-TESTIV PRO2000 finds the faults you cant see with any other instrument. - Turn-to-turn, coil-to-coil, and phase-to-phase faults - Open phases - Burned or contaminated windings - Poor connections...