Coupling Decoupling Network M2
new
The TBCDN-M2 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M2 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...
Midrand, South Africa
ShinewayTech OPM-50 Intelligent Optical Power Meter
new
OPM-50 Seires paired with SLS-50 Seires Intelligent Stabilized Laser Source can be used to identify fiber, measure attenuation and loss, verify continuity and evaluate fiber link transmission quality. ●Automatic ...
Midrand, South Africa
Coupling Decoupling Network M3
new
The TBCDN-M3 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M3 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...
Midrand, South Africa
Snap On 32 mm up to 750 MHz
new
The TBCP2-250 is a snap-on RF current monitoring probe. The probe has a very flat response with a 3dB bandwidth of 250 MHz and is characterized over the frequency range from 30kHz to 300 MHz. Upon request, it can...
Midrand, South Africa
TBL5016-3 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 4 paths, CISPR 16-1-2
new
- Manufacturer: LiSN
The TBL5016-3 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9 kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for te...
Midrand, South Africa
Probe for 3 kHz to 100 MHz
new
The TBCCP1-3K100 is a coaxial RF current monitoring probe, expanding the Tekbox product range of affordable EMC pre-compliance test equipment. The probe has a 3 dB bandwidth from 3 kHz to 100 MHz and a very flat ...
Midrand, South Africa
Grandway FHP3P05 | 10G PON Power Meter
new
Items: Specifications | Wavelength: 1270nm(burst) | Test range(dbm): 10～-40 | Spectral passband(nm): 1310±50 | Isolation: 1577nm＞40dB | Insertion loss: ≤1.5dB | Uncertainty: ≤0.5dB | Resolution: 0.01dB | Threshol...
Midrand, South Africa
Coupling Decoupling Network M1
new
The TBCDN-M1 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M1 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...
Midrand, South Africa
TBL5016-2 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 2 paths, CISPR 16-1-2
new
- Manufacturer: LiSN
The TBL5016-2 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for tes...
Midrand, South Africa
FiberMASTER Series – Power Meter
new
The TREND FiberMASTER™ fibre optic testing kit allows the user to measure absolute power and calculate the loss of fibre optic links at several wavelengths. Absolute power measurements are helpful when trouble sh...
Midrand, South Africa
TBLC08 50 Ohm // 50 µH + 5 Ohm, 8A LISN, 2 paths, CISPR 16-1-2
new
- Manufacturer: LiSN
The TBLC08 50uH LISN is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR16 standard. The device is designed for t...
Midrand, South Africa
TBL0550-1 5 µH, 50A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025, MIL-STD-461F
new
- Manufacturer: LiSN
The TBL0550-1 5µH LISN is a device required to setup conducted noise measurements of DC-powered electronic equipment. It is designed to be used for measurements in the frequency range of 150kHz to 110 MHz accordi...
Midrand, South Africa
TBMR-110M EMI-ANALYZER DC-110 MHZ
new
- Manufacturer: EMI
International EMC Standards require various spectrum measurement methods and equipment to ensure that the EUT´s electromagnetic emissions do not exceed the specified limits. The TBMR-110M EMI Analyzer is designed...
Midrand, South Africa
TESCA Synchronization Panel Trainer
new
46622 in industry loads are directly connected to the source through an isolation switch. But when the load demand is increased and the source capacity is less, another source is connected in parallel so that bot...
Midrand, South Africa
Dummy Load (-105dBc) Connector: N-F
new
Dummy Load (-105dBc) Frequency: DC-3GHz | Power: 5W | Connector: N-F
Midrand, South Africa
Tip: Enter manufacturer, model or keyword