Processing » Agitators, Blenders, Mixers » Hiroshima

Building Filters

105

Used Agitators, Blenders, Mixers in Hiroshima, Japan

2003 Mitsui Mining FM150L
- used
- Manufacturer: Mitsui mine
Capacity: 150L With control panel Power: 30kw/15kw | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
Mixing machine
- used
Startup board (inverter) Remarks. Dirty, but clean.
Hiroshima, Japan
2015 Aiko House MS-120 (Mighty S)
- used
- Manufacturer: Aikusho
Rotation speed: Any setting is possible with 80 to 320 rpm Increase in viscosity of slurry etc.
Hiroshima, Japan
1999 Noritake NR-120A
- used
- Manufacturer: Noritake
Ceramic roll Roll dimensions: φ120×450 Motor: 2.2kw Water-cooled, manual tightening Remarks One of three rolls is damaged. Need to replace with new parts.
Hiroshima, Japan
2005 Buhler SDW 800
- used
- Manufacturer: Bühler
Remarks. Ideal for dispersion Purchasing area: 60Hz | Quantity saved: 1
Hiroshima, Japan
1991 Inoue Manufacturing DV-300
- used
- Manufacturer: Inoue Manufactory
Motor: 3.7kw Material of wetted parts: SUS Container capacity: 330ℓ Hydraulic unit with spare tank x 1
Hiroshima, Japan
SUS tank with coil
- used
Capacity: approx. 10 m3 With agitator (missing due to diversion of drive unit) Only near the bottom of the coil With heat insulator (with dents, etc.)
Hiroshima, Japan
Shimazaki Works Cylindrical Vertical
- used
- Manufacturer: Shimazaki Seisakusho
For medium viscosity (7000CP) 11kw cheaper 3-stage blades, filling volume: 1200L, Jacket: Yes Agitator: 11kw, low cost Shape: Bottom dish mirror Previous experience: Used in adhesive manufacturing process
Hiroshima, Japan
SUS tank
- used
Total capacity: approx. 2000L. *Since no data is available, actual size measurement is required for some accurate capacity. With agitator (eG3), reduction ratio 1/5.
Hiroshima, Japan
SUS tank
- used
Total capacity: approx. 1000L. *Since no data is available, actual size measurement is required for some accurate capacity. With agitator (eG3), reduction ratio 1/5.
Hiroshima, Japan
3500L Cylindrical vertical type
- used
Agitator: 5.5kw (Cyclo Decelerator) Jacket：SUS304 Drawing available
Hiroshima, Japan
1984 Iwai machine cylinder vertical type
- used
- Manufacturer: Iwai Machinery
Jacket / stirrer (2.2 kW, 3 propeller blades) ※ Satake Multi Mixer (360 rpm) Closed type, with shower ball / manhole
Hiroshima, Japan
Hitachi, Ltd. Cylindrical vertical type
- used
- Manufacturer: Hitachi
Wetted part material: SUS Flat top and bottom SUS spiral cored Jacket: Coil (transmission surface 5m2) Agitator: 1.5kw Shape: Upper and lower flat
Hiroshima, Japan
350 L Cylinder vertical type
- used
Jacket (for hot and cold water, not steam) Homo mixer (3.7 kw)
Hiroshima, Japan
Ashizawa PLM-300
- used
- Manufacturer: アシザワ
The vacuum specification was changed to a pressurized specification. Tank capacity 320L. Weight 4.6 tons. Bayer reduction gear drive. Can be converted to 200V by rewinding or replacing the motor.
Hiroshima, Japan

34 5 6 7