Used Agitators, Blenders, Mixers in Hiroshima, Japan

Shimazaki Works RF 04

• Manufacturer: Shimazaki Seisakusho

0.4kw (cyclo), 25rpm (60Hz), anchor blade Shaft: Φ40 x 1988H Reduction ratio 1/71

Mixing Roll

jacketed Where to use: Chemical plant Environmental recycling plant | Roll diameter: 400φ×900mmL × 2 pcs. | Power: 30KW 200V operation confirmed

1977 Shinko Fowdler 300L

• Manufacturer: Shinko

Max. working pressure Body: 3.0 kg/cm2 Jacket: 3.0 kg/cm2 Glass: 3300 Jacket, agitator, and stand included Remarks *Pinhole test & repair will be installed if necessary.

Mitsui Miike MIE 70/50-FVD

• Manufacturer: Mitsui Miike

55/37kw/400V Pole change motor For Henschel Mixer Power: 55 / 37kw | Quantity saved: One

2001 Irie Shokai PBV-1000

• Manufacturer: 入江商会

Total capacity 1L / Finishing capacity 0.7L Rotation speed 15-35 rpm Heater (temperature control)

M Technique Co., Ltd. CLM - 3.7S

• Manufacturer: M Technique Co., Ltd.

Emulsifies and disperses multiple liquids that are difficult to mix under high temperature and pressure conditions. The closed container with a jacket has a capacity of 10 liters, a design pressure of FV to 0.8 M...

Kowa Kogyosho KGO-1000

• Manufacturer: Kowa Kogyosho

1-stage, 2-type division Power: 2.2Kw 200V | Purchasing area: 60Hz | Material: Wetted part SUS | Quantity saved: 1

Large machinery industry DSS-45-L

• Manufacturer: Large machine industry

Screen mesh size: 1mm Triple-layer drum structure (each screen is independent) Suitable for liquid products.

Ishikawa Toki Works Y-05E

• Manufacturer: Ishikawa Toki Works

Powder contact material: SUS Built-in vacuum pump Quantity saved: 1

Primix MARKⅡ Type 630

• Manufacturer: Primix

900 to 3600 rpm Power: 3.7kw 2P | Material: SUS304 for essential parts | Quantity saved: One

2015 IKA UTC 115

• Manufacturer: IKA

Reference throughput : 500L Rotation speed : 3000pm

[New Stock] Made in Korea 1200Ø IDTS1200-1 to 3

Available in two-, three-, or four-section configurations. All options are possible. [In Stock] Cassette Type Material of Powder Contact Parts: SUS304, Frame Material: SS400 Frame Diameter: 1200, Motor: 1.5kW Tap...

2008 Japan Sose Industrial MK-65L

• Manufacturer: Japan Sose Industry

Container material: SUS Container capacity: 65ℓ With spare container Agitator blades are fixed and the vessel is rotated. Remarks Tanks are shown overlapping in the video. When in use, only the lower tank is show...

2003 Dalton PK-350

• Manufacturer: Dalton

Where to use: Chemical factory Food factory Feed and fertilizer factory | Rotation speed: 185 to 830 rpm | Powder contact part: Made in SUS | Throughput: 10-13L

Fujipowder CKDJ-180

• Manufacturer: Fuji Paudal

28 rpm, capacity 1100-1200 kg/hour Weight 4000kg Power: 15kw | Material: Wetted SUS | Quantity saved: One | Size: Approx. W2200 (tank: 900) x L3800 (layer: 2200) x H1000 (mm)