- Trusted Seller
2022 XCMG XR240E
new
- Manufacturer: XCMG
- Model: XR240
Contact for pricing Engine: Volvo | Fuel: Diesel | Power: 265 kW ( hp) | Max torque: 240kNm | Max depth: 70m | Max diameter: 2000mm ( crowd winch) / 2200mm ( crowd cylinder) | Engine rated power: 265kW
Ontario, Canada 
1996 Texoma Taurus XLT
used
- Manufacturer: Texoma
- Model: TAURUS XLT
120-ft Max drill depth Price Reduced Job-ready rig 120-ft max drill depth 150,000 lb-ft of torque 8.3 L Cummins engine 2,003 hours put on by current owner 7-in sub, slot pin Triple square Kellies
2007 IMT AF130
used
- Manufacturer: IMT
120-ft digger! AF130 drill rig w/ J-lock 120-ft 4-element Kelly bars Mounted on a CAT 324DLN w/ CAT 7 series engine w/ 175HP at 1,800 RPM Current engine hours of 10,823 The AF130 has 86,295 ft-lbs of rotary torqu...
2002 LoDril LLMHT-40R
used
- Manufacturer: LoDril
Good running LoDril on 330BL This LoDril LLMHT-50R was assembled by Bay Shore in 2002 on the 2000 CAT 330BL. The round-locking bar set was a 4-element 50′ drill depth , but has been converted to a 3-element 40′ d...
1991 Watson 3000
used
- Manufacturer: Watson
- Model: 3000
Good condition rig with 70-ft max drill depth. This Watson 3000 is mounted on a 1991 HME 880-DOH. The rig has a max drill depth of 70 ft, wedge pin, 6-in and 8-in Kellies, and a 6-in sub. Total running hours on t...
2009 Klemm 702-2
used
- Manufacturer: Klemm
Great for limited access! Great limited-access micropile drill This is a very nice, compact drill capable of installing high-capacity micropiles in very limited access settings. Thew Unit starts and runs All func...
2002 Soilmec R518
used
- Manufacturer: Soilmec
- Model: R-518
110-ft max drill depth Good condition rig with Cat 3306TA engine Just under 16,000 hours 110-ft max drill depth Caterpillar 330B carrier 4-part Kelly bar 130mm Kelly Stub, round pin type Cable: 25mm x 250’ with c...
2012 ABI 13/16 on Sennebogen
used
- Manufacturer: Sennebogen
Multi-purpose rig in good condition. Major recent repairs! TM13/16 ABI Mobilram on Sennebogen SR25 chassis This telescopic leader listing includes 2015 MDBA 4500-2 Rotary Drill (44kNm torque) and a 17VV Vibro Ham...
2015 CZM EK200
used
- Manufacturer: CZM
- Model: EK200
Includes CFA kit! Price just reduced! Good condition, just over 5,000 hours 4-element Kelly 130-ft max drill depth CAT engine 177-mm sub size Also included in the sale is a bottom drive CFA kit (no auger is inclu...
2006 Watson EDT-10
used
- Manufacturer: Watson
Great for large-diameter power line and bridge work! 2006 Watson EDT-10 on 2001 CAT 345B Excavator Large excavator-mount rig very useful for large-diameter power line and bridge work 14,065 hrs as of 1/23 Remanuf...
2012 Watson 1100TM
used
- Manufacturer: Watson
- Model: 1100TM
Great condition and low hours! Low- hour 1100 on IH truck Upper JD engine and draw works in great shape with approx. 2,700 hrs Lower engine recently gone through and tested out well IH Maxxforce truck has 15,800 ...
2007 Watson 2100TM
used
- Manufacturer: Sterling
Good condition Watson ready for work 2007 Watson 2100TM mounted on 2009 Sterling LT9500 John Deer 4045t engine on rig with 10,667 hours as of 11/22 29,400 miles on Sterling as of 11/22 60-ft max drill depth 4-in ...
Interoc AN109B 9086
used
- Manufacturer: Interoc
Excellent for tieback/nail/micropile work Tie-back drill w/ Krupp HB40A Rotary and double clamps Excellent for tieback/nail/micropile work Mast stroke of 15 ft Weight: 27,000 lbs Deutz Diesel Engine Model BF6L913...
2008 Soilmec SF-70
used
- Manufacturer: Soilmec
- Model: SF-70
Cat C7 engine 14,460 hours as of Dec. 2024 Kelly: XHD5 connector 88.5-ft max drill depth
2017 Watson 3110 CM
used
- Manufacturer: Watson
One-owner, low-hour rig! Price just reduced AGAIN! Double reduction mechanical rotary w/ 120,000 ft-lbs of torque 2-element friction Kelly with 80-ft max depth (hollow inner) 5″ stub Controlled free-fall winch wi...
Tip: Enter manufacturer, model or keyword