Building Filters

Used metal processing

Trusted Seller
1978 HAEUSLER VRM-HY 12X1.5 #2000420
- Manufacturer: Haeusler
- Model: VRM-HY
SERIAL WO10554 NEW 1978 MODEL VRM12/3 CAPACITY 1.5" LENGTH 144" ROLLS 4 HYDRUALIC
Toledo, OH
Trusted Seller
1968 HAEUSLER VRM-HY-3000x12 #0302618
- Manufacturer: Haeusler
- Model: VRM-HY
SPECIFICATIONS: 10' x 1/2" Haeusler Initial Double Pinch Plate Bending Roll Hertz, 3 Phase. Hydraulic Drop End Front & Rear Pressure Gauges E-Stop Controller Stationary
Toledo, OH
1978 Haeusler VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
1 1/2" x 12' Four Roll Plate Roll Haeusler VRM-HY Capacity: 1.5" | Overall length of rolls: 12' | Number of rolls: 4 | Top & bottom roll diameter: 23-1/2" | Side rolls diameter: 19" | Plate bending diameter: 28" ...
USA
Trusted Seller
HAEUSLER - Clamp
- Manufacturer: Haeusler
Min. shell inner diameter: 1800 | Max. shell inner diameter: 5500 | Min. shell outside diameter: 1500 | Max. shell outside diameter: 2500 | Minimum wall thickness: 10 mm | Maximium wall thickness: 40 mm | Max....
Babberich, Netherlands
Trusted Seller
HAEUSLER - Crocodile
- Manufacturer: Haeusler
Min. shell inner diameter: 1500 | Max. shell inner diameter: 6000 | Min. shell outside diameter: 1500 | Max. shell outside diameter: 2500 | Minimum wall thickness: 20 mm | Maximium wall thickness: 70 mm | Max....
Babberich, Netherlands
Trusted Seller
HAEUSLER - VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
Rolling width: 3050 mm | Rolling thickness 3x toproll ø: 60 mm | Rolling thickness 5x toproll ø: 70 mm | Rolling thickness prebending: 50 mm | Top roll ø: 630 mm | Bottom roll ø: 600 mm | Side roll ø: 500 ...
Babberich, Netherlands
Trusted Seller
HAEUSLER - VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
Rolling width: 3000 mm | Rolling thickness 3x toproll ø: 130 mm | Rolling thickness 5x toproll ø: 140 mm | Rolling thickness prebending: 120 mm | Top roll ø: 950 mm | Bottom roll ø: 850 mm | Side roll ø: 1...
Babberich, Netherlands
Trusted Seller
HAEUSLER - VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
Rolling width: 3000 mm | Rolling thickness 3x toproll ø: 120 mm | Rolling thickness 5x toproll ø: 150 mm | Rolling thickness prebending: 100 mm | Top roll ø: 910 + 820 + 740 mm | Bottom roll ø: 940 mm | Si...
Babberich, Netherlands
Trusted Seller
HAEUSLER - VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
Force lower rol upper roll 1178 Ton Cone bending attachment Hardned and grounded rolls Width between upper and lower roll 200 mm Power 180 kW
Babberich, Netherlands
Trusted Seller
Haeusler VPR 105-6,5
- Manufacturer: Haeusler
- Model: VPR 105-65
Construction year: 1984 | Roller length: 105 mm | Capacity: 0 T | Plate thickness: 65 mm | Number of roles: 4
Etten-Leur, Netherlands
Trusted Seller
Haeusler VRM HY L4000x6
- Manufacturer: Haeusler
- Model: VRM-HY
Roller roller plate roller, roller Incl. conical bending Incl. hydraulic retraction assist. Videos available for dismantling
Wijchen, Netherlands
Trusted Seller
Haeusler VRM-HY-N 3100 x 20 mm CNC
- Manufacturer: Haeusler
- Model: VRM-HY
Directe 2 aangedreven rollen Conische buiging Geen fundering nodig Automatische drukbalans tussen boven- en onderrol Automatische smering De onderste rol kan worden versteld door middel van druk of positie.
Deinze, Belgium
Trusted Seller
Haeusler VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
2 rolls are mechanically driven with driveshafts = no slip possible of workpiece Hydraulic upper lower movement of rolls and support bearing
Deinze, Belgium
Trusted Seller
Haeusler 4RM-hy VRM-hy-1 2000x5
- Manufacturer: Haeusler
- Model: VRM-HY
SN WO 092-N010/1507 Working width 2000 mm Sheet thickness 5 mm automatic sheet feed with vacuum suction system and an automatic ejection for the rounded sheets
Laucha an der Unstrut, Germany
Haeusler HPR 10-H
- Manufacturer: Haeusler
Capacity angle iron ø900mm: 90x90x11 mm | Flat iron: 90x15 mm | Round iron ø600mm: 65 mm | I- & u-beam ø1000mm: NP16 | Bending resistance: 29 cm³ | Engine: 7 kW | Length: 2000 mm | Width: 1470 mm | Height: 1330 ...
Värnamo, Sweden
Haeusler VRM-HY Sheet Metal Processing
- Manufacturer: Haeusler
- Model: VRM-HY
Good condition Haeusler VRM-HY Sheet Metal Processing available between 1968 and 2007 years. Located in USA and other countries. Click request price for more information.
USA