Building Filters

Used metal processing

Trusted Seller
1978 HAEUSLER VRM-HY 12X1.5 #2000420
- Manufacturer: Haeusler
- Model: VRM-HY
SERIAL WO10554 NEW 1978 MODEL VRM12/3 CAPACITY 1.5" LENGTH 144" ROLLS 4 HYDRUALIC
Toledo, OH
Trusted Seller
1968 HAEUSLER VRM-HY-3000x12 #0302618
- Manufacturer: Haeusler
- Model: VRM-HY
SPECIFICATIONS: 10' x 1/2" Haeusler Initial Double Pinch Plate Bending Roll Hertz, 3 Phase. Hydraulic Drop End Front & Rear Pressure Gauges E-Stop Controller Stationary
Toledo, OH
1978 Haeusler VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
1 1/2" x 12' Four Roll Plate Roll Haeusler VRM-HY Capacity: 1.5" | Overall length of rolls: 12' | Number of rolls: 4 | Top & bottom roll diameter: 23-1/2" | Side rolls diameter: 19" | Plate bending diameter: 28" ...
USA
Trusted Seller
HAEUSLER - Clamp
- Manufacturer: Haeusler
Min. shell inner diameter: 1800 | Max. shell inner diameter: 5500 | Min. shell outside diameter: 1500 | Max. shell outside diameter: 2500 | Minimum wall thickness: 10 mm | Maximium wall thickness: 40 mm | Max....
Babberich, Netherlands
Trusted Seller
HAEUSLER - Crocodile
- Manufacturer: Haeusler
Min. shell inner diameter: 1500 | Max. shell inner diameter: 6000 | Min. shell outside diameter: 1500 | Max. shell outside diameter: 2500 | Minimum wall thickness: 20 mm | Maximium wall thickness: 70 mm | Max....
Babberich, Netherlands
Trusted Seller
HAEUSLER - VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
Force lower rol upper roll 1178 Ton Cone bending attachment Hardned and grounded rolls Width between upper and lower roll 200 mm Power 180 kW
Babberich, Netherlands
Trusted Seller
HAEUSLER - VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
Rolling width: 3000 mm | Rolling thickness 3x toproll ø: 120 mm | Rolling thickness 5x toproll ø: 150 mm | Rolling thickness prebending: 100 mm | Top roll ø: 910 + 820 + 740 mm | Bottom roll ø: 940 mm | Si...
Babberich, Netherlands
Trusted Seller
HAEUSLER - VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
Rolling width: 3050 mm | Rolling thickness 3x toproll ø: 60 mm | Rolling thickness 5x toproll ø: 70 mm | Rolling thickness prebending: 50 mm | Top roll ø: 630 mm | Bottom roll ø: 600 mm | Side roll ø: 500 ...
Babberich, Netherlands
Trusted Seller
HAEUSLER - VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
Rolling width: 3000 mm | Rolling thickness 3x toproll ø: 130 mm | Rolling thickness 5x toproll ø: 140 mm | Rolling thickness prebending: 120 mm | Top roll ø: 950 mm | Bottom roll ø: 850 mm | Side roll ø: 1...
Babberich, Netherlands
Trusted Seller
Haeusler VPR 105-6,5
- Manufacturer: Haeusler
- Model: VPR 105-65
Construction year: 1984 | Roller length: 105 mm | Capacity: 0 T | Plate thickness: 65 mm | Number of roles: 4
Etten-Leur, Netherlands
Trusted Seller
Haeusler VRM HY L4000x6
- Model: VRM-HY
Roller roller plate roller, roller Incl. conical bending Incl. hydraulic retraction assist. Videos available for dismantling
Wijchen, Netherlands
Trusted Seller
Haeusler VRM-HY
- Manufacturer: Haeusler
- Model: VRM-HY
2 rolls are mechanically driven with driveshafts = no slip possible of workpiece Hydraulic upper lower movement of rolls and support bearing
Deinze, Belgium
Trusted Seller
Haeusler VRM-HY-N 3100 x 20 mm CNC
- Manufacturer: Haeusler
- Model: VRM-HY
Directe 2 aangedreven rollen Conische buiging Geen fundering nodig Automatische drukbalans tussen boven- en onderrol Automatische smering De onderste rol kan worden versteld door middel van druk of positie.
Deinze, Belgium
Trusted Seller
Haeusler 4RM-hy VRM-hy-1 2000x5
- Manufacturer: Haeusler
- Model: VRM-HY
SN WO 092-N010/1507 Working width 2000 mm Sheet thickness 5 mm Automatic sheet feeding with vacuum suction system and automatic ejection for the rounded sheets
Laucha an der Unstrut, Germany
1975 Haeusler HPR 10-hy-asym-spec
- Manufacturer: Haeusler
Top support for diameter: 650-1500mm Angle iron dia.1000mm: 100x100x11 mm | Square iron dia. 500mm: 50x50 mm | Round iron dia. 600mm: 65 mm | Flat iron high edge dia900mm: 90x15 mm
Värnamo, Sweden
Haeusler VRM-HY Sheet Metal Processing
- Manufacturer: Haeusler
- Model: VRM-HY
Good condition Haeusler VRM-HY Sheet Metal Processing available between 1968 and 2007 years. Located in USA and other countries. Click request price for more information.
USA