Used in California, USA

GOULDS 3410

• Manufacturer: Goulds
• Model: 3410

• MOTOR MODEL 7E445TTFN 4052AAW • 150 HP MOTOR • 1785 RPM • 445T FRAME

GOULDS MT 3196

• Manufacturer: Goulds
• Model: 3196MT

• 5 HP MOTOR • 1750 RPM • 254 FRAME

Summit 2196

• Manufacturer: Summit
• Model: 2196

MOTOR, 7.5 HP, 1800 RPM, 213TC SUMMIT 2196 LTO PUMP SIZE 4X6-13

Avery Weigh-Tronix ZM301

• Manufacturer: Avery - Berkel

N MAX: 10,000 E: ≤ 6000 EU TEC: 0200-NAWI-05468 POWER SUPPLY: 110–240 VAC, 50/60 HZ, 0.5 A OPERATING TEMPERATURE: 10°C TO 40°C

Avery Weigh-Tronix ZM301

• Manufacturer: Avery - Berkel

N MAX: 10,000 E: ≤ 6000 EU TEC: 0200-NAWI-05468 POWER SUPPLY: 110–240 VAC, 50/60 HZ, 0.5 A OPERATING TEMPERATURE: 10°C TO 40°C

Ingersoll Rand 2340

• Manufacturer: Ingersoll Rand
• Model: 2340
• Horsepower: 5 horsepower
• Fuel type: electric

- PSIG / CFM: 40 PSIG → 14.4 CFM 90 PSIG → 14.3 CFM MAX → 14 CFM - RATING: 5 - MAXIMUM PRESSURE: 175 PSI - PUMP SPEED: 1575 RPM - TANK CAPACITY: 80 (LIKELY GALLONS)

COMPREDSED AIR SYSTEMS B53H84-E-N4

• Manufacturer: COMPREDSED AIR SYSTEMS

• PUMP: CA1E • MOTOR: BALDOR RELIANCE SUPER E • MOTOR HP: 5 • VOLTAGE: 230/460 V (MOTOR), 460–480 V 3-PHASE (COMPRESSOR) • AMPERAGE: 13.4/6.7 A • FREQUENCY: 60 HZ • RPM: 1750 • OPERATING PRESSURE: 175 PSI • FRAME...

RUDOLPH RESEARCH J457

• Manufacturer: Rudolph Research Analytical

MEASUREMENT RANGE: REFRACTIVE INDEX (RI): 1.26 – 1.72 BRIX: 0 – 100 % ACCURACY: ± 0.00002 RI ± 0.015 BRIX REPRODUCIBILITY: ± 0.00002 RI / ± 0.015 BRIX RESOLUTION: 0.00001 RI / 0.01 BRIX

2003 Alfa laval M20-MFG

• Manufacturer: Alfa-Laval
• Model: M20-MFG

• MAWP: 150 PSI AT 320°F • MDMT: -20°F AT 150 PSI • HEAT TRANSFER AREA: 2,104.3 SQ. FT. • PLATE DIMENSIONS: 1,035 MM WIDTH / 230 PLATES (0.50 MM PLATE THICKNESS)

ALFA LAVAL HEAT EXCHANGER

• Manufacturer: Alfa-Laval

2003 Alfa laval M20-MFG

• Manufacturer: Alfa-Laval
• Model: M20-MFG

• RATED 150 PSI AT 320 °F (MAWP) AND 120 °F AT 150 PSI (MDMT) • TOTAL HEAT TRANSFER AREA 2104.3 SQ FT • PLATE WIDTH 1035 MM WITH 230 PLATES OF 0.50 MM THICKNESS

1976 AMERICAN HEAT RECLAIMING CORP. HEAT EXCHANGER

• Manufacturer: AMERICAN HEAT RECALIMING CORP.

• HEATING SURFACE AREA: (UNSPECIFIED ON TAG, ESTIMATED ~ 170 SQ FT BASED ON SIZE) • TEST PRESSURE (HOT / COLD): 188 PSI • DESIGN PRESSURE: 125 PSI • DESIGN TEMPERATURE: 235 °F

DDS SILVER 2500 TPD

• Manufacturer: DDS SILVER

THE DDS SILVER SLOPE DIFFUSER IS A CONTINUOUS, COUNTER-CURRENT BEET DIFFUSION SYSTEM BUILT AROUND A SLOPED, ENCLOSED TROUGH HOUSING TWO LARGE INTERMESHING SCROLLS THAT CONVEY COSSETTES UPWARD WHILE EXTRACTION WAT...

1976 AMERICAN HEAT RECLAIMING CORP. HEAT EXCHANGER

• Manufacturer: AMERICAN HEAT RECLAIMING CORP.

• DESIGN PRESSURE (HOT SIDE): 188 PSI @ 225°F • DESIGN PRESSURE (COLD SIDE): 188 PSI @ 125°F • TEST PRESSURE: 150 PSI

2003 Alfa laval M20-MFG

• Manufacturer: Alfa-Laval
• Model: M20-MFG

• RATED 150 PSI AT 320 °F (MAWP) AND 120 °F AT 150 PSI (MDMT) • TOTAL HEAT TRANSFER AREA 677.1 SQ FT • PLATE WIDTH 933 MM WITH 74 PLATES OF 0.50 MM THICKNESS