Building Filters
- Trusted Seller
FANUC S-500 Robots
- Manufacturer: Fanuc
- Model: S-500
A slender arm design make this robot easy to integrate into any factory floor. Includes all Controllers. C1280
California, USA - Trusted Seller
FANUC S-500 Robots
- Manufacturer: Fanuc
- Model: S-500
A slender arm design make this robot easy to integrate into any factory floor. Includes all Controllers. C1280
California, USA - Trusted Seller$3,950 USDOrange, CA
- Trusted Seller
FANUC PALLETIZING SYSTEM
- Manufacturer: Fanuc
FANUC ROBOTIC PALLETIZING SYSTEM MODEL M4101b/160 COMPLETE WITH SUCTION CUP PICK-UP ARM CAPACITY 160KG COMPLETE WITH CONTROLLER R-331B SUPPORT BASE INCLUDED (2) UNITS ARE AVAILABLE, PRICE PER UNIT.
- Trusted Seller
Fanuc Robodrill Alpha D21LiB5 ADV CNC Drill & Tap Machining Center, 2020 w/ 4-Axis Fanuc Table
- Manufacturer: Fanuc
- Model: Robodrill D21LiB5
Equipped with: Fanuc 31iB5 iHMI Control Fanuc DDR 4-Axis Rotary Table | X: 27.6 in | Y: 15.7 in | Z: 15.7 in | Power: 19.0 hp | Rpm: 10000.0 rpm | # atc: 21.0 | Taper: Big Plus BBT30 | Table size: 16.1" x 33.5"
Los Angeles, CA - Trusted Seller
- Trusted Seller
Fanuc Robodrill Alpha T10B CNC Drilling and Tapping Machine, 1994
- Manufacturer: Fanuc
- Model: Robodrill T10B
Fanuc 16M CNC Control, 14 ATC, CT-30 taper, 8k rpm
Los Angeles, CA - Trusted Seller
Fanuc Robodrill A-D14MiB CNC Drill & Tap Machining Center, 2021
- Manufacturer: Fanuc
- Model: Robodrill
Equipped with: Fanuc CNC Control | X: 19.68 in | Y: 15.78 in | Z: 12.99 in | Power: 15.0 hp | Rpm: 10000.0 rpm | # atc: 14.0 | Taper: BT30
Los Angeles, CA - Trusted Seller
2015 FANUC M20ia Robot with Schunk Grippers and R30ib Control
- Manufacturer: Fanuc
- Model: M-20iA
- Load capacity: 20 kg
- no. of axis: 6 axis
FANUC Control Pendant 6- Axis Dual Schunk Grippers 25kg Payload 72" H-Reach Repeatability: ±0.05mm Robot Motion Range: J1 +340° - 360° J2 ±240° J3 ±303° J4 ±400° J5 ±290° J6 ±540° Robot Mass: 250kg ...
Los Angeles, CA - Trusted Seller
Fanuc Robodrill A-D14MiB CNC Drill & Tap Machining Center, 2021
- Manufacturer: Fanuc
- Model: Robodrill
Equipped with: Fanuc CNC Control | X: 19.68 in | Y: 15.78 in | Z: 12.99 in | Power: 15.0 hp | Rpm: 10000.0 rpm | # atc: 14.0 | Taper: BT30
Los Angeles, CA - Trusted Seller
2015 FANUC M20ia Robot with Schunk Grippers and R30ib Control
- Manufacturer: Fanuc
- Model: M-20iA
- Load capacity: 20 kg
- no. of axis: 6 axis
FANUC R-30ib Control & Control Pendant Vision F176103 6-Axis Dual Schunk Grippers 20kg (44lbs) Payload 71.3" Reach Repeatability: ±0.08mm Robot Motion Range: J1-370° J2-260° J3-458° J4-400° J5-360° J6...
Los Angeles, CA 
2021 FANUC Robodrill D21MiB5
- Manufacturer: Fanuc
- Model: Robodrill
Fanuc 31i_B5 Control BT30 with Big Plus Dual Contact Spindle 10,000 RPM Direct Drive New High Torque Spindle Tsudakoma TWA-130 5th Axis Rotary Pneumatic 16C Collet Closer Renishaw RTS TS27R Probe 2 Fixture Pneuma...
Fullerton, CA
FANUC 18M CONTROLLER NO CABINET NO P.B. CONTROL
- Manufacturer: Fanuc
FANUC, No. 18M Controller No Cabinet no P.B. Control CONTROLLER No CABINET NO P.B. CONTROL ***SPECIFICATION SHOWN ARE TO BE USED AS A GUIDELINE ONLY. IT IS THE CUSTOMER RESPONSIBILITY TO CHECK FOR SIZE AND FEATUR...
$2,950 USDSanta Paula, CA- Trusted Seller
Fanuc R2000IA/20F Robot, 2001
- Manufacturer: Fanuc
- Model: R-2000iA/200F
- Load capacity: 200 kg
- no. of axis: 6 axis
Weight: 2733.732 | Equipped with: Control **Issues w/ Joints 2 & 3** | # axis: 6.0 | Payload: 440.92 lb
Los Angeles, CA - Trusted Seller
Fanuc Robodrill Alpha D21LiB5 ADV CNC Drill & Tap Machining Center, 2020
- Manufacturer: Fanuc
- Model: Robodrill D21LiB5
Equipped with: Fanuc 31iB5 iHMI Control | X: 27.6 in | Y: 15.7 in | Z: 15.7 in | Power: 19.0 hp | Rpm: 10000.0 rpm | # atc: 21.0 | Taper: Big Plus BBT30 | Table size: 16.1" x 33.5"
Los Angeles, CA 
Fanuc A06B-0165 Servo Motor
- Manufacturer: Fanuc
- Model: A06B-0165
Good condition Fanuc A06B-0165 Servo Motors. Located in USA and other countries. Click request price for more information.
USA
