Used in California, USA

GOULDS MT 3196

• Manufacturer: Goulds
• Model: 3196MT

2022 ATLAS EQUIPMENT CO. 1.5 VC

• Manufacturer: Atlas

• PUMP SPEED: 1880 RPM • CAPACITY: 80 GPM @ 65 TDH • POWER REQUIREMENT: 6 BHP • WEG 7.5 HP MOTOR

GOULDS 3196

• Manufacturer: Goulds
• Model: 3196

GOULDS 3410

• Manufacturer: Goulds
• Model: 3410

• MOTOR MODEL 7E445TTFN 4052AAW • 150 HP MOTOR • 1785 RPM • 445T FRAME

GOULDS MT 3196

• Manufacturer: Goulds
• Model: 3196MT

• 5 HP MOTOR • 1750 RPM • 254 FRAME

Summit 2196

• Manufacturer: Summit
• Model: 2196

MOTOR, 7.5 HP, 1800 RPM, 213TC SUMMIT 2196 LTO PUMP SIZE 4X6-13

Avery Weigh-Tronix ZM301

• Manufacturer: Avery - Berkel

N MAX: 10,000 E: ≤ 6000 EU TEC: 0200-NAWI-05468 POWER SUPPLY: 110–240 VAC, 50/60 HZ, 0.5 A OPERATING TEMPERATURE: 10°C TO 40°C

Avery Weigh-Tronix ZM301

• Manufacturer: Avery - Berkel

N MAX: 10,000 E: ≤ 6000 EU TEC: 0200-NAWI-05468 POWER SUPPLY: 110–240 VAC, 50/60 HZ, 0.5 A OPERATING TEMPERATURE: 10°C TO 40°C

COMPREDSED AIR SYSTEMS B53H84-E-N4

• Manufacturer: COMPREDSED AIR SYSTEMS

• PUMP: CA1E • MOTOR: BALDOR RELIANCE SUPER E • MOTOR HP: 5 • VOLTAGE: 230/460 V (MOTOR), 460–480 V 3-PHASE (COMPRESSOR) • AMPERAGE: 13.4/6.7 A • FREQUENCY: 60 HZ • RPM: 1750 • OPERATING PRESSURE: 175 PSI • FRAME...

RUDOLPH RESEARCH J457

• Manufacturer: Rudolph Research Analytical

MEASUREMENT RANGE: REFRACTIVE INDEX (RI): 1.26 – 1.72 BRIX: 0 – 100 % ACCURACY: ± 0.00002 RI ± 0.015 BRIX REPRODUCIBILITY: ± 0.00002 RI / ± 0.015 BRIX RESOLUTION: 0.00001 RI / 0.01 BRIX

DDS SILVER 2500 TPD

• Manufacturer: DDS SILVER

THE DDS SILVER SLOPE DIFFUSER IS A CONTINUOUS, COUNTER-CURRENT BEET DIFFUSION SYSTEM BUILT AROUND A SLOPED, ENCLOSED TROUGH HOUSING TWO LARGE INTERMESHING SCROLLS THAT CONVEY COSSETTES UPWARD WHILE EXTRACTION WAT...

LIQUID FILTER TANK

VERI 5000

• Manufacturer: VERI

1968 SPARKLER MCR0600

• Manufacturer: Sparkler

• TANK THICKNESS: 1/4" • TANK WORKING PRESSURE: 75 PSIG @ 650°F • TANK TEST PRESSURE: 112 PSIG

1973 ELECTRO WELDING CO. INC. 20090

• Manufacturer: ELECTRO WELDING CO. INC.

• SHELL DIAMETER: 60 IN • SHELL THICKNESS: 0.25 IN •HEAD THICKNESS: 0.25 IN • MAX ALLOWABLE WORKING PRESSURE: 75 PSI • MAX TEST PRESSURE: 115 PSI • DESIGN TEMPERATURE: 650 °F