Used controllers

2006 Decoving machine MASDIM

With 2 pneumatic hammers With 2 vibrating motors to shake out the sand With electric control by PLC ALLEN BRADLEY With noise protection cabin With full automatic process With sand extraction belt

Moulding machine HEINRICH WAGNER HRP1.1

• Manufacturer: Heinrich Wagner

Outer dimensions: length: 850mm; width: 1300mm; height: 1950mm Moulding box min: lenght: 450mm; width: 350mm Moulding box max: length:1000mm; width: 600mm With control board and emergency stop

Furan sand screw mixer BORDEN, ± 2 t/h with silo

Type: Micro 86, Serial number: 164 The mixer is hanging under the bunker External dimensions when fully mounted: 5800 mm x 2240 mm, h. 5400 mm Mixer motor UNELEC, TtypeT132M16; 4 kW; 960 rpm; 220/380 V Bunker wit...

Compulsory mixer mobile ±200l

Refractory mixer Dimensions: Length: 1100mm; Width: 1400mm; Height: ±1700mm Internal dimensions of bucket: Ø950mm; width: 400mm With protective lid Manual flap With forklift shoes With control unit

Hydraulic fixed cut off machine UNIVERSAL, Ø 600 mm

Cutting disc Ø 600 mm, with hydraulically movable protection With hydraulic unit With hydraulically movable left-right turntable With clamping unit With control panel With cabin requires dedusting ± 5000 m³/h

stainless corecoting mixing vessel G+F 115l

• Manufacturer: G+F

Dimensions: Lenght: 650mm; Depht: 1100mm; Hight: 1680mm 0,75KW; 685 r/min; 230/400V contenance: 115L with variable speed by frequency converter Danfoss niveau control over VEGA submersible transmitter wateradditi...

Core sand mixing plant STEFFENS, type SM30

Boltmixer, fastmixer Volume testing device for sand With 2 pumps With control board SIEMENS S5 With powder support With pneumatic depletion flap Spare mixer (second-hand) With cleaning flap

Transport and dosing worm screw, useful length 1000, Ø 150mm

Gearmotor LEROY SOMER, 1,1 kW, 910/33,3 rpm, 220/380 V Direct drive in line Inlet 140 x 140mm With control and drain cleaning cover under Ø 150mm Outlet Ø 150mm

Horizontal tiltable gravity die casting machine, hydraulic

Dimensions: Length: 2100mm; Width: 800mm ; Height: 1150mm Min opening: ±270mm; max opening: ±460mm With 2 guide rods Turnable With hydraulic power With hydraulic control by 2 levers 380V, 4kW

Pneumatic slag gripper

Dimensions: 1000mm; Width: 860mm; Height: 2400mm On stand With crane eye Pneumatically controlled (connections above) All existing jaws are supplied 2 different models for casting flat jaws and square jaws

Sample grinder, with cup grinding stone HERZOG

• Manufacturer: Herzog

Dimensions: length: 850mm, width: 900mm; height: 1600mm With swiveling clamping device Head is fixed, height adjustable by hand wheel With water pump With emergency stop With control cabinet and operator panel Ma...

2001 Core sand mixing plant LAEMPE SM5; 5,5t/h

• Manufacturer: Laempe / Röperwerk

Dimensions: Length: 2300mm; Width: 1200mm; Height: 2500mm Mixing bucket: Ø380mm; height: 600mm = ±65l With resin and hardener dosing Horizontal mixing paddleHorizontal cleaning paddleMotor power: 7,5KW Without el...

Mobile core sand mixer on rails SEGAB 120l

• Manufacturer: Segab

Dimensions: Mixer: Length: 2200mm; Width: 1000mm; Height: 1000mm Internal dimensions mixer: Ø700mm; depth: 450mm With loading station with hopper and sand cooler With SIEMENS S5 control unit Without dosing system...

Sand conveyor 170 l, R.DEBUS

Input Ø 210 mm, output Ø 100 mm, with pressure controller Filling system by cone, max. temperature 200°C, pressure 6 bar, content 170 l With compressed air accelerator on the bottom

Core Shotter RÖPER - SODIM Automat, 5 l

• Manufacturer: Laempe / Röperwerk

Maximum dimensions of core boxes: width 340mm, depth 240mm, height 450mm With gassing plate Table movable to 4 directions With automatic clamping unit All mouvements by hydraulics With control Automat Telemecaniq...