Processing » Foundry & Casting » Germany

Search By Manufacturer

Search By State

Building Filters

69

Used controllers in Germany

  • 1994 ABP ITK 4000

    1994 ABP ITK 4000

    • Manufacturer: ABP

    Mainly consists of: MF-Crucible furnace with tilting chair, hydraulic cylinder without furnace cover GS choke 11.2 mH: 1050A NEW Year: 2014 GS choke 11.2 mH: 1050A Used Year: 1994 DS oil transformer 1,600kVA/10kV...

    Iserlohn, Germany
  • 1979 Kraft-Hausherr G/HW Nr. 623

    1979 Kraft-Hausherr G/HW Nr. 623

    • Manufacturer: Hausherr

    Annealing furnace (gas heated) with roll-off system Vertikal door opening: Height 3,1m from top edge Stove wagon, width 4,2m Batch weight max. 90 tons + 23 tons of Lower vehicle, 1 PLC S-7 control renewed in 2014...

    Iserlohn, Germany
  • 1990 IDRA OL 560PRP #1077-03051

    1990 IDRA OL 560PRP #1077-03051

    • Manufacturer: Idra
    • Model: OL 560PRP

    Mold spraying machine Manufacturer Acheson, Model DAG 1000 FCT S-B AB, Year of manufacture 2001, Foundry robot Manufacturer ABB, Model IRB 440F / 45, S4C-Plus control system, Year of manufacture 2004, Deburring p...

    Dorsten, Germany
  • 1988 WEINGARTEN GDK 1000 #1077-03050

    1988 WEINGARTEN GDK 1000 #1077-03050

    • Manufacturer: Weingarten
    • Model: GDK 1000

    Mold spray machine available Manufacturer Acheson Model DAG 1000 FCT 2TB Year of manufacture 2002 Foundry robot present Manufacturer ABB Model IRB 6600 Control S4C-Plus Year of construction 2003 Deburring press a...

    Dorsten, Germany
  • Trusted Seller
    Butterfly valve PN16 GGG40 flanged

    Butterfly valve PN16 GGG40 flanged body cast iron gate valve throttle valve

    • Manufacturer: Musterfirma

    A robust cast iron butterfly valve (material GGG40) with a flange connection is offered for sale. The valve is designed for piping systems with a nominal pressure of PN16. Ideal for industrial applications in wat...

    $187 USD
    Borken, Germany
  • Trusted Seller
    2008 Manousek AVOR 1108/10

    2008 Manousek AVOR 1108/10

    • Manufacturer: Manousek

    Casting machine for balancing weights - steel rims Zinc die-cast Serial number: 02887 PLC type: Siemens S7 including spiral conveyor RNA Type SR8-B-250-2L Operating voltage: 3x400V, 50Hz, Control voltage: 24V, PL...

    Altenstadt, Germany
  • 2007 Lühr WMF

    2007 Lühr WMF

    • Manufacturer: Lühr

    Technical data: Chimney and control cabinet with Siemens S-7 control and ABB frequency converter. As seen, without dismantling, exw Germany

    Iserlohn, Germany
  • Roeperwerk H80

    Roeperwerk H80

    • Manufacturer: Laempe / Röperwerk

    Mainly consists of: Core shooter H80 Roller conveyor for core box without housing Electrical control panel modernised with new Siemens S7 PLC controls and Visual display Lüber amine gasing device Typ LW- FDA 1640...

    Iserlohn, Germany
  • Trusted Seller
    Auction
    1999 OMS Die Casting Cell

    1999 OMS Die Casting Cell

      robot control, parts removal robot Kuka KR 15-2 built in 1999 incl. robot control, parts conveyor belt, trimming press Weko WE C 12, built in 2006, serial no.: 404

      Schwäbisch Gmünd, Germany
      Visit Auction Website
    • 2013 Neuhof Coring table /

      2013 Neuhof Coring table / conveyor used for sale

      • Manufacturer: Neuhof

      Mainly consists of: 2x pneumatic chain tensioners 2x balancing motors with 6.5 kW each (frequency controlled + freely programmable VIPA CC03 control) Associated peripherals Technical documentation Sold as seen, F...

      Iserlohn, Germany
    • RÖPER H 2,5

      RÖPER H 2,5

      • Manufacturer: Laempe / Röperwerk

      Table-top machine, shooting volume 2.5 l, core box max. 280x 280/400 x 225 mm, manual adjustment of the upper part, clamping device, vibrating feed chute, housing, electric PLC control, two-hand control panel, Co...

      Meinerzhagen, Germany
    • SEGAB PROMIX

      SEGAB PROMIX

      • Manufacturer: Segab

      Two-component binder system, dosing pumps, control unit

      Meinerzhagen, Germany
    • 2001 RÖPERWERK H 2.5 V-K

      2001 RÖPERWERK H 2.5 V-K

      • Manufacturer: Laempe / Röperwerk

      Shooting volume 2.5 l, core box max. 280x 280/400 x 225 mm, manual adjustment of the upper part, vacuum clamping device, hopper, housing, PLC control, control panel, STEFFENS sand mixer SM-30, GTG gassing device ...

      Meinerzhagen, Germany
    • Trusted Seller
      Auction
      1999 BÜHLER SC D/42 V-30

      1999 BÜHLER SC D/42 V-30 die-cast cell

      • Manufacturer: Bühler

      consisting of smelting furnace Striko West furnace W 90 SL DG, BUILT IN 1999, serial no.: 5853, the casting machine Bühler, Lw column spacing approx. 640 mm, spraying robot Fanuc M-710iC, incl. robot control and ...

      Schwäbisch Gmünd, Germany
      Visit Auction Website
    • 1993 LUEBER LW-FDA 825

      1993 LUEBER LW-FDA 825

      • Manufacturer: Lüber
      • Model: LW-FDA 825

      Mains/control voltage 380/220 V, 50 Hz, heat output 8 kW, cold box process

      Meinerzhagen, Germany
    12345

    Overview

    Foundry and casting equipment encompasses the machinery and tools used in the process of metal casting. This includes furnaces to melt metal, molds to shape it, and various other machines to handle the molten material and finish the cast products. Foundries are essential in producing high-quality metal parts and components for a variety of industries, from automotive to aerospace.

    FAQ

    What should I consider when buying used foundry and casting equipment?

    Check the equipment's age, condition, and maintenance history. Ensure it meets your production needs and complies with safety standards. Verify the availability of spare parts and technical support.

    How do I ensure the safe shipping of foundry and casting equipment?

    Use a specialized transport service with experience in heavy and sensitive machinery. Secure the equipment properly to prevent damage during transit.

    What is the maintenance schedule for foundry and casting equipment?

    Regular maintenance includes inspecting and cleaning furnaces, checking for wear and tear on molds, and ensuring all moving parts are lubricated and functioning properly. Refer to the manufacturer’s guidelines for specific maintenance intervals and procedures.