Used compression

Screw Making Machine/Cold Heading Machine

• Manufacturer: regenboog

Product Description Heading machine,Screw heading machine,One die two blow heading machine The heading machine adopts cold heading way to make the screw heads by double-click the whole mould form. Our screw headi...

Sans convoyeur ± 100 l

• Manufacturer: FONTEC

External dimensions: length: 750mm, width: 750mm, height: 1120mm Tank Ø 450 mm , height 650mm , input Ø180 mm, exit Ø 70mm With pneumatic ventil on the input side

Mounting press BÜHLER Pneumet 3

• Manufacturer: Bühler

220 V, 50 Hz, 5,4 A Type 20-2195-220; Serial number 478; MHIE 230, 1200W, model 20-1595-220 Automatic- pneumatic mounting press for samples with electric heating

Pendulum grinder Ø500

Dimensions: length: 2800mm; width: 1400mm; height: 800mm With pneumatic cylinder for bending -( down pushing assistance) the machine With 2 motors, each 11 KW 400/690V; 50Hz V belt driving

2000 Pneumatic sand transport SNE-RONOT 250 l

Construction year: 2000, weight: 350 kg Useful Ø 650 mm Capacity 250 l On 3 feet With pneumatic clap With 2 sensors Input sand Ø 200mm, output sand Ø 70mm

Refractory sprayer VELCO-ROTAMAT

• Manufacturer: Velco Rotamat

Gear motor 4kW; 5,5PS; 50Hz; 8,6A; 380V Water inlet 1" 1/4 - without hose, flow rate 1.1 m³/h With hose ±4m With compressed air supply hose With vibrator on funnel

Rapid mixer FORDATH-PACEMASTER, 1,5-2,5 t

Year of construction: 1974, overhauled, weight: 1000 kg Motor 4-5 hp, 220/380 V Useful height entry of sand 2200 mm Hydraulic pneumatic at the output of sand, with 2 vormixaxle Inside Ø 130 mm

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

Screw mixer GFA, ± 3 - 4 t/h

Motor mixer ATT; 7,5 kW, 220/380 V, 970 rpm With motor for pumps, with manual gear box With bunker, electrical control unit With brake for pneumatic cylinder on the rotation With sensor for door closer Control SI...

2007 Sand feeder 31 liters, KLEIN

• Manufacturer: Klein

Inlet Ø 145 mm With control valves Inlet closure by cones Air supplied from below rather than from the pneumatic cylinder above Advantages: Lower air consumption per tonne and less wear and tear Maximum continuou...

Hotbox coreblower FM20

• Manufacturer: FMI

Dimension: Lenght: 1940mm; Width: 1000mm; Hight: 1750mm With 2 sides, With 2 sides pneumatic clamping strocke 2×200mm max width core box 345mm Control by automatic Toshiba E×40

1982 Semiautomatic shell moulding machine for cold and hot box, FMI

• Manufacturer: G&F + FMI

Construction year: 1982, weight: 500 kg Clamping dimension of the thermal jaws: 450 mm x 320 mm, one chucking side fixed, one chucking side mobile Heated with gas Gas heating with mobile gas plate With pneumatic ...

Lining spraying unit SAS 3

Type : III E7, serial number: 3190 With loading container, hand slide valve for lift track and long flex pipe Filling hole wicht pneumatic clap Spraying system over screw With motor and frequency converter On 3 w...

Chromite sand separation plant GUT., 4-stage

• Manufacturer: G.U.T.

With Siemens panel With pneumatic sand conveyor 18´% Quarz sand separation in 4 stages: Composed of: 1 x silo, 60t with cooler and magnetic particle separator 2 x sandconveyor 1 x silo, 25t, state 2-4