Used compression

2009 Pneumatic sand feeder NEUHOF, with CE type plate, 150 l

Type: PDGF150, serial number: 271 With compressed air-fluidizing base inside With height-adjustable feet With level sensor on the top With pneumatic vent valve and overpressure valve

Screw mixer for core sand 6t/h REISAUS-BAUMBERG

• Manufacturer: REISAUS-BAUMBERG

5,5kW, 400V 50Hz Dimensions: Lenght: 2830mm; With hopper and filling level sensor (3 dosages possible) With 2 screw for additiv With 2 acid pumps With control board PLC SIEMENS S7 Mixer is swivelling by hand Mixe...

1977 Core sand mixer FORDATH 1000 kg, FORDATH, 700-900 l

In good condition Useful capacity ± 700 at 900 l, pneumatic door on the side

1989 Core sand mixer GIETARD, type ZAMIX I, 50 l

3 hp, 1490 rpm, 220/380 V Draining by pneumatic door With safety equipment

Core sand mixer BADIE MIXTENSIF, 200 l

• Manufacturer: MIXTENSIF

Inside dimensions: Ø830 mm, depth: 410 mm With pneumatic discharge flap With protective grille

Monorail sand transport vessel, ± 7,5 l

Translatation via Monorail (KBK2) Motor driven by KONE-CRANES With flat cable Emptying via pneumatic flap

Sand feeder FAT, 1000 l, CE

Input Ø 275 mm; exit Ø 110 mm With 2 sensors and pneumatic valve Closing by cone on the input side With declaration of conformity CE

Furan sand screw mixer IMF 3 t./h.

• Manufacturer: IMF

Screw mixer: Dimensions: 1400mm; Width: 1000mm; Height: ±1900mm with pneumatic slider With 2 pumps driven by mixer motor With control cabinet and Simatic panel

Core sand mixing plant STEFFENS, type SM30

Boltmixer, fastmixer Volume testing device for sand With 2 pumps With control board SIEMENS S5 With powder support With pneumatic depletion flap Spare mixer (second-hand) With cleaning flap

Sand conveyor 350 l, OFFICINE

Year of construction: 1996, Weight : ± 250 kg Konus in good condition With switch panel With pneumatic control valves Ø entry 250mm, Ø exit 90mm With pressure control valve, with additional accelerator at the exit

2000 Pneumatic sand transport SNE-RONOT 250 l

Construction year: 2000, weight: 350 kg Useful Ø 650 mm Capacity 250 l On 3 feet With pneumatic clap With 2 sensors Input sand Ø 200mm, output sand Ø 70mm

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

Chromite sand separation plant GUT., 4-stage

• Manufacturer: G.U.T.

With Siemens panel With pneumatic sand conveyor 18´% Quarz sand separation in 4 stages: Composed of: 1 x silo, 60t with cooler and magnetic particle separator 2 x sandconveyor 1 x silo, 25t, state 2-4

1989 Automatic core sand mixing line STEFFENS

core send mixing plant for cold box smal vibrating convoyor for additifs and intensity regulations Volume testing device Storrge hopper ±250l Pneumatic discharge flap with inspection window and filling level prob...

1972 Pneumatic sand transport 250 l, RONOT

Serial number: 16083, construction year: 1972 Max operating pressure 4 bar Max operating temperature 25°C Pneumatic clap (valve) Sensor with 2 flaps at the entrance Sand input Ø 145 mm, sand output Ø 70mm Capacit...