Processing » Foundry & Casting » Belgium

Building Filters

1441

Used processing in Belgium

  • Trusted Seller
    Screw mixer MAVEREX, 1 t/h,

    Screw mixer MAVEREX, 1 t/h, fixed

      Furansand screw mixer 2 t/h Colt Set Process, 1 t/h CO2 Process Entry height: 1900 mm, discharge height: 1300 mm Fixed, with 1 gear wheel pump, 1 membrane pump adjustable from hand With command pannel with relays...

      Amel, Belgium
    • Trusted Seller
      Permeameter SIMPSON

      Permeameter SIMPSON

      • Manufacturer: Simpson

      Dimensions: Length: 260mm; Width: 330mm; Height: 430mm 220V;50Hz;0,1A Suitable for the following processes: Cold Box Core oil Clay-bonded sand Hot Box Nobake/Air blower Shell/Croning (sand for cast mould shells a...

      Amel, Belgium
    • Trusted Seller
      Nobake moulding plant IMF

      Nobake moulding plant IMF

        ± 150 m rolling conveyor 4 x transfer wagons Mixer IMF, 30 t/h, equipped for furan process ROLLOVER with mould/pattern separation Mould manipulator IMF for overhead crane Painting station Pattern Fastloop

        Amel, Belgium
      • Trusted Seller
        Laborary induction refond plant LINN

        Laborary induction refond plant LINN

        • Manufacturer: Linn Hight Therm

        5,5KW; 380V Metal refond plant (ex: steel chips, blasting steel granule or other smal metal parts) per inductionn by vacuum and centrifuge process to producespectrometer specimens for analysing water-cooler with ...

        Amel, Belgium
      • Trusted Seller
        2006 Decoving machine MASDIM

        2006 Decoving machine MASDIM

          With 2 pneumatic hammers With 2 vibrating motors to shake out the sand With electric control by PLC ALLEN BRADLEY With noise protection cabin With full automatic process With sand extraction belt

          Amel, Belgium
        • Trusted Seller
          Auction
          Eco-dec EX20W fluid regeneration system

          Eco-dec EX20W fluid regeneration system

            Capacity: 20L

            Sprimont, Belgium
            Visit Auction Website
          • Trusted Seller
            Ladle suspension system IAS 2,5t

            Ladle suspension system IAS 2,5t

            • Manufacturer: IAS

            External dimensions: Length: 2100 mm; Height: 2200 mm

            Amel, Belgium
          • Trusted Seller
            Pneumatic sand feeder HENSEL 100l

            Pneumatic sand feeder HENSEL 100l

            • Manufacturer: HENSEL

            Dimensions: Length: 1160 mm; Width: 800 mm; Height: 1320 mm Max. temperature = 200 °C

            Amel, Belgium
          • Trusted Seller
            Ladle suspension system FOUNDRY SERVICE

            Ladle suspension system FOUNDRY SERVICE

            • Manufacturer: FOUNDRY SERVICE

            External dimensions: Length: 2100 mm; Height: 2200 mm

            Amel, Belgium
          • Trusted Seller
            Core sand mixing installation STEFFENS

            Core sand mixing installation STEFFENS ±2t/h

            • Manufacturer: STEFFENS

            System consisting of mixer, hopper, transfer trolley and dosing station for resin and hardener Mixer: External dimensions: Length: 700 mm; Width: 900 mm; Height: 1500 mm Usable dimensions: Ø600 mm; Depth: 460 mm ...

            Amel, Belgium
          • Trusted Seller
            Gasing unit LÜBER LW-FDA-825; 8kW

            Gasing unit LÜBER LW-FDA-825; 8kW

            • Manufacturer: Lüber
            • Model: LW-FDA 825

            With 8 kW heating With contactor control and stainless steel storage tank 30 l Compressed air control via proportional valve With micro pump, gas dosing via rotameter

            Amel, Belgium
          • Trusted Seller
            Gasing unit LÜBER LW-FDA-825; 8kW

            Gasing unit LÜBER LW-FDA-825; 8kW

            • Manufacturer: Lüber
            • Model: LW-FDA 825

            With 8 kW heating With contactor control and stainless steel storage tank 30 l Compressed air control via proportional valve With micro pump, gas dosing via rotameter

            Amel, Belgium
          • Trusted Seller
            1980 Dry Discgrinder HERZOG HT

            1980 Dry Discgrinder HERZOG HT 350-2

            • Manufacturer: Herzog

            Type: HT350-2, Year: 1980, in very good conditions With installed dust filter

            Amel, Belgium
          • Trusted Seller
            1989 Vibrating dryer TECHNOFINISH

            1989 Vibrating dryer TECHNOFINISH

            • Manufacturer: TECHNOFINISH

            Make: TECHNOFINISH | Weight: ± 1000 kg | Dimensions: Ø 1560mm, height 1300mm | Motor: 380 V, 50 Hz | Useful width: max. 450mm

            Amel, Belgium
          • Trusted Seller
            8 Ingots moulds 2 x

            8 Ingots moulds 2 x ±4l

              Dimensions: Length: 1100 mm, width: 300 mm; height: 230 mm Internal dimensions bottom: 150 x 110 mm; top: 220 x 370 mm with round trunions, 1 side with square pin in suplement for tilting Without support construc...

              Amel, Belgium
            12345

            Overview

            Foundry and casting equipment encompasses the machinery and tools used in the process of metal casting. This includes furnaces to melt metal, molds to shape it, and various other machines to handle the molten material and finish the cast products. Foundries are essential in producing high-quality metal parts and components for a variety of industries, from automotive to aerospace.

            FAQ

            What should I consider when buying used foundry and casting equipment?

            Check the equipment's age, condition, and maintenance history. Ensure it meets your production needs and complies with safety standards. Verify the availability of spare parts and technical support.

            How do I ensure the safe shipping of foundry and casting equipment?

            Use a specialized transport service with experience in heavy and sensitive machinery. Secure the equipment properly to prevent damage during transit.

            What is the maintenance schedule for foundry and casting equipment?

            Regular maintenance includes inspecting and cleaning furnaces, checking for wear and tear on molds, and ensuring all moving parts are lubricated and functioning properly. Refer to the manufacturer’s guidelines for specific maintenance intervals and procedures.