Used processing in Belgium

Moulding machine BMD, type ARPA 300

Pressing capacity 15 000 kg Lifting by rollers Weight: ± 2600 kg | Dimensions: length 1100 mm, depth 1500 mm, height 2300 mm | With table: 960 mm x 580 mm | Pressing stroke: 130 mm | Lifting stroke: 220 mm | Jolt...

Vibrating conveyor, 3000 mm x 1000 mm

• Manufacturer: BMD

External Dimensions: length 3000 mm, width 1600 mm, hauteur 1750 mm on 4 feet, resp. on 4 springs Centrifugal force 2 x 2430 N Outlet height 1450 mm

1982 Shake-out conveyor BMD 4500mm x 1000mm

2 vibratingmotors Weight: 3500 kg

Jolt squeeze moulding machine BMD; ARPA 300

• Manufacturer: BMD

Dimensions: Width: 960mm; Deepth: 1400mm; Hight: 2230mm Tightening: 1300mm; Turning out: 220mm with pin lifting With emergency stop (pneumatic) capacity of tightening dynamic : 15T, static: 5T;

Jolt squeeze moulding machine BMD; ARPA 300

• Manufacturer: BMD

Dimensions: Width: 960mm; Deepth: 1400mm; Hight: 2230mm Tightening: 1300mm; Turning out: 220mm with pin lifting With emergency stop (pneumatic) capacity of tightening dynamic : 15T, static: 5T;

Small permanent drum magnet with drive

• Manufacturer: BMD

External dimensions: length 900 mm, width 570 mm, height 1180 mm Engine BAUER: 380 V; 0,5 CV; type: reducer drum speed 175 rpm/min in solid housing drive over 2 V-belts 2 outlets for separating

Small permanent drum magnet with drive

• Manufacturer: BMD

External dimensions: length 800 mm, width 620 mm, height 780 mm Engine OBERMOSER: 380 V; 0,5 CV, type: reducer drum speed ± 170 rpm/min in solid housing drive over chaine 2 outlets for separating

Moulding machine BMD ARPA1

Table 500 mm x 660 mm With jolts, press and removal from the mould successive Pression 4000 kg, vibrator 180 kg adjustable150/200/250 mm Foundation needed 275 mm Hand operated

Jolt squeeze moulding machine BMD ARPA700

With pin lifting Static forming pressure 11000 kg, dynamic 33 000 kg Mould dimensions: maximal 840 mm, 800 mm under floor (in put) Command panel completely pneumatic

Vibrating chut BMD, 2550 mm x 400 mm

2 vibrating motors 1460 rpm, 0,55 kW fixed at the side In good condition

Vibrating convoyer BMD, 5400×1100×1420mm

External dimensions: Length: 5400mm; Width: 1100mm; Height: 1420mm Useful dimensions: Length: 5350mm; Width: 300mm; Height: 200mm Motor: Brand: BMD; 2KW , 980r/min 220/380V vibation with 2 vibration motors On 4 f...

Vibrating conveyor 2000 mm x 1200 mm

• Manufacturer: BMD

External dimensions: length 2350 mm, width 1900 mm, height 1650 mm On frame, respectively on 6 silent blocs Centrifugal force 2 x 2900 N With penumatic tilted extension ± 300 mm

Vibrating convayor BMD 1260 mm x 550 mm

Motor FLOTTMANN, type: RUL800/14, 2 x 0.55 kW; 1420 rpm; 220/380 V

Vibrating chut BMD, uselful length 6250, Ø 350mm

Overall length 6500mm, overall width 850mm Useful length 6250mm, Ø 350mm With 2 vibrating motors VIMARC, each 0,55 Kw, 220/380 V In good condiiton

Vibrating conveyor BMD, 2600 mm x 860 mm x 200 mm

2 motors FEIGE, type V17110/4, 1,6 kW, 1440 rpm, 380 V Vibrating motors below the grid With 3 silent blocks on each foot The bottom of the conveyor is equipped with rubber Possibly suitable for tumble blast machine