Used Machine Tools in Texas, USA

CHAIN WRENCH, GEAR WRENCH, MDL. J778 / MJ155, size 15 1/2S

CHAIN WRENCH, GEAR WRENCH, MDL. J778 / MJ155, size 15 1/2S

KITAGAWA UPR450U EXTENDED STROKE AIR CHUCK

• Manufacturer: Kitagawa

Clamping stroke per jaw 0.55”, 14mm This chuck was on short term loan until a special-order chuck arrived. KITAGAWA UPR450U EXTENDED STROKE AIR CHUCK

CONTRACTOR BOX, KOBALT MDL. KB32

CONTRACTOR BOX, KOBALT MDL. KB32

CHAIN TONGS, WILLIAMS, MDL. CT-14, 1-1/2" - 8" cap.

CHAIN TONGS, WILLIAMS, MDL. CT-14, 1-1/2" - 8" cap.

MANUAL TUBING TONG, AOT, MDL. K30, 5,000 FT PD CAP.

MANUAL TUBING TONG, AOT, MDL. K30, 5,000 FT PD CAP.

MANUAL TUBING TONG, AOT, MDL. K30, 5,000 FT PD CAP.

MANUAL TUBING TONG, AOT, MDL. K30, 5,000 FT PD CAP.

SMW BB N 500-230-3 STANDARD STANDAR STROKE AIR CHUCK

• Manufacturer: SMW

position to assure it holds pressure. for a front mounted chuck or stand-off brackets for a rear mounted chuck. We also supply adapter plates and can do the complete installation if required. SMW BB N 500-230-3 ...

SEOAM 40” 3-JAW HYDRAULIC CHUCK

• Manufacturer: SEOAM

SEOAM 40” 3-JAW HYDRAULIC CHUCK Spindle nose: Flat back | Jaw stroke: 30 mm, | Plunger stroke: 57 mm | Maximum gripping diameter: 1000 mm | Minimum gripping diameter: 330 mm | Maximum input force: 161 KN, (16450 ...

SCHUNK ROTA-S PLUS MANUAL 3-JAW CHUCK

• Manufacturer: Schunk

SCHUNK ROTA-S PLUS MANUAL 3-JAW CHUCK (Quick change jaw system)

Autoblok 3 Jaw Hydraulic Chuck

• Manufacturer: Autoblok

Model 315 GHN Chuck O.D. 12" Chuck I.D. 3.75" Chuck Mount A-11 (7.75" back taper bore) Master Jaws Fine Serrations

SCHUNK ROTA TB 500-230 LH EXTENDED STROKE AIR CHUCK

• Manufacturer: Schunk

position to assure it holds pressure. for a front mounted chuck or stand-off brackets for a rear mounted chuck. We also supply adapter plates and can do the complete installation if required. SCHUNK ROTA TB 500-...

SCHUNK TB 500-205 LH EXTENDED STROKE AIR CHUCK

• Manufacturer: Schunk

Factory List Price $ 46,361. USD Schunk part number: 0818015 | Chuck diameter: 500 mm (19.68”) | Thru hole: 205 mm (8.07 ”) | Spindle nose: flat back | Stroke per jaw: 0.66” rapid, 0.33” clamping | Total stroke p...

ROHM STANDARD STROKE AIR CHUCK

• Manufacturer: Röhm

We reassembled the chuck with NEW O-rings and any other parts required and checked the chuck under pressure in the open and closed position overnight to make sure it was holding air.

SMW BB400-140SS

• Manufacturer: SMW

Air Distributor Ring A11 Adapter plate O.d.: 16” | I.d: 5.5” | Max rpm: 1600 | Jaw stroke: .27” | Weight: 340lbs

Haas VF-4SS Machining Center

• Manufacturer: Haas
• Model: VF-4SS

Good condition Haas VF-4SS Machining Centers available between 2003 and 2016 years. Located in USA and other countries. Click request price for more information.