Used Extruders

Dr. Collin ZK25×24/42D Twin-Screw Extruder for Sale

• Manufacturer: Dr. CollinDr. Collin

54037001 Used Dr. Collin ZK25x24/42D Twin Screw Extruder. 25mm Diameter screws. 42:1 L/D. Maximum screw speed 521 RPM via a gearbox by a 30kW motor. 7 housing sections. Electrically heated, water cooled. Approxim...

4″ Berlyn 30:1 – Air Cooled Extruder

4’’ 30:1 Berlyn Extruder Air cooled 150 H.P. D.C. Was running poly pipe 450 # per Hour

Industrial Plastic Extruder – Johnstech 50mm, 28:1 L/D, Variable Speed

• Manufacturer: Johnstech

10678044 Used Johnstech Single Screw Extruder; Screw diameter 50mm L/D 28:1; Model XJ50 -28D; 22kw AC Motor 415v With Variable Speed Drive; Speed range 10 to 150rpm; Complete with Electrical Panel; Last used to m...

3.5″ Polytruder 24:1 Air Cooled Extruder

Werner & Pfleiderer ZSK40 Twin Screw Extruder for Sale – 40mm, 50 HP

• Manufacturer: WP
• Model: ZSK40

10151368 Used Werner & Pfleiderer Model ZSK40, 40mm Co-rotating twin screw extruder. 1990 Model year. 46:1 L/D vented barrel with 11-barrel sections and a 41" centerline height. Driven by 50 hp 500 volt 1750/2100...

Extru-Tech E-325 Single Screw Extruder – 150-800 Lbs/Hr

• Manufacturer: ExtrutechExtrutech

53877002 Used Extru-Tech Model E-325, Single Screw Extruder. Unit designed primarily for research and development purposes. 3.25", Approximately 40 HP motor, Can process between 150 to 800 pounds per hour (68 to ...

3.5″ Davis Std. 75 HP Air Cooled Extruder

• Manufacturer: Davis-Standard

1997 Davis Standard 3.5 Inch Single Screw Extruder:

3.5″ Davis Std. 24:1 Extruder Model 35IN35

• Manufacturer: Davis-Standard

3.5″ Davis Std. 24:1 Extruder – Model 35IN35 – New in 1995 – but Refurbished since and not been used since … 50 HP AC motor and Drive Air Cooled 5 Barrel Zones – 3 Die Zones

Gloucester 2522 R2 2.5" Extruder – 60 HP, 32:1 L/D, Reconditioned

• Manufacturer: GloucesterGloucester

10755143 Used Gloucester Model 2522 R2 2.5" 32:1 L/D Extruder with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72" centerline height. Gearbox has a reduction ra...

2.5″ Akron/EDS Akron 36:1 Extruder Reconditioned

2.5″ Akron/EDS Akron 36:1 Extruder Reconditioned 42″ Centerline – 36:1 L/D Ratio – 6″ x 3.5″ feed throat, Belt Driven through a 13.95:1 Koellman PEZS 360/3.5 Gearbox, Rated to 125 HP, 75 HP Baldor DC Motor with R...

Gloucester 2.5" Single Screw Extruder – 32:1 L/D, Air-Cooled & Vented

• Manufacturer: GloucesterGloucester

10755144 Used Gloucester 2.5" Extruder 32:1 L/D five (5) zone air cooled and vented barrel at a 45" centerline height. Top center feed throat. Driven by a 50 HP A/C 1750/2100 RPM motor, includes 6 zone temperat...

Leistritz ZSE 100 GLAAX 100mm Co-Rotating Twin Screw Extruder

• Manufacturer: Leistritz

10151570 Used Leistritz ZSE 100 GLAAX 100mm Co-Rotating Twin Screw Extruder, Driven by 330 kw (442 hp), 1600 rpm DC motor with SCR control. Has 300 rpm screw speed, rated at 5000 Newton meters per shaft torque c...

20mm Werner & Pfleiderer Model ZSK20 Co-Rotating Twin Screw Extruder

• Manufacturer: WP
• Model: ZSK20

10151389 Used 20mm Werner & Pfleiderer Model ZSK20 Co-Rotating Twin Screw Extruder. Has 40/1 L/D barrel at 43" centerline height driven through a 3:1 gearbox with a 37-Newton meter torque capacity per screw shaft...