2020 Zwick Roell ProLine Z010 Materials Tensile Tester – 10 kN
used
- Manufacturer: Zwick - Roell
Included: 10kN load cell Type Xforce HP sn 780766 Pair 500N pneumatic grips PC with testXpert III software preloaded User Manual: Hard Copy and CD Calibration Certificates Options: 200N load cell Type Xfor...
San Jose, CA
Shimpo Instruments FGS-100PVL, 110lbf Motorized Test Stand with Imada Digital Force Gauge
used
- Manufacturer: Imada
Motorized Test Stand FGS-100PVL (vertical - low speed) - 110 lb Capacity Specifications Capacity 110 lb (50 kg) Stroke 5.5" (140 mm) Vertical Clearance 2.4"- 7.1" (61-181 mm) 5 steps, 1.18"/step (30 mm/step) ...
$1,650 USDSan Jose, CA
Chatillon 50oz-in Digital Torque Gauge
used
- Manufacturer: Chatillon
Digital torque gauge, 50 x .02 oz-in, 35 x .02 N-cm.
$1,000 USDSan Jose, CA
Chatillon HTC 250lbf Capacity Manual Test Stand
used
- Manufacturer: Chatillon
250lb capacity manual test stand with DPPH-100 0-100lb analog gauge and dial indicator for stroke measurement. Spacing between columns 6". Stand has 60" extended length columns for accomodating longer specimens.
$1,250 USDSan Jose, CA
Chatillon TCM-200 225lbf Capacity Testing Machine with digital gage
used
- Manufacturer: Chatillon
- Model: TCM-200
225lb capacity (1000N), 18" travel, includes force five model FDV-5 5lb x .002lb force gauge, adjustable high/low limits, 0.5-12.5 in/min, 110v.
$1,650 USDSan Jose, CA
MTS Systems Corporation MTI-1000 Digital Vibration and Displacement Senor
used
Non contact measurement of displacement and vibration, includes 1 plug in module with fiber optic probe, digital display Probes available: Model 3816, sn0059, sensitivity 4.10 uin/mv, Frequency response DC57Khz m...
$1,200 USDSan Jose, CA
Mecmesin Versatest 550lbf (2.5KN) Test Stand and Force Gauge
used
- Manufacturer: Mecmesin
2500N (550lb) motorized test stand single/constant cycle operation 500mm (19.7") travel range speed range 12.5-500mm/min (0.5-19.7in/min) manual/cyclic/single cycle modes RS232 interface for PC communication...
$4,350 USDSan Jose, CA
Instron 2712-001 pneumatic grips with 1lbf capacity (5N)
used
- Manufacturer: Instron
5N (1 lbf) pneumatic tension grips Sort: 0
$1,400 USDSan Jose, CA
Chatillon Ametek DFS-II 0-50lb(250N) x .002lb digital force gauge with acces.
used
- Manufacturer: AMETEK Powervar
Sort: 0
$1,275 USDSan Jose, CA
Krautkramer USN 58L ultrasonic flaw detector
used
The USN 58L is a portable ultrasonic flaw detector designed for use in direct sunlight with its color transflective LCD display and 60 Hz update rate. The USN 58L is a replacement for the USN 50L and 52L and live...
$2,950 USDSan Jose, CA
Dillon quantrol (Mecmesin) Snapshot motorized test stand with 4 load cells, 220lbf load capacity, software
used
- Manufacturer: Mecmesin
220lbf load capacity 4 load cells included: 1000N/ 220lb 250N/55lb 25N/5.5lb 5N/1.1lb See PDF link below for complete specifications
$4,250 USDSan Jose, CA
Instron A1122-1010 flexure fixture with 100kN static/dynamic load capacity
used
- Manufacturer: Instron
Sort: 0
$1,800 USDSan Jose, CA
Instron 2714-004 cord and yarn grips with 1KN capacity (225lbf)
used
- Manufacturer: Instron
load capacity 1000N (225lbf) max specimen diameter 2.4mm min specimen length 95mm air pressure range 90 psi manual included Automatic air control kit with footpedal: add $2100. subject to availability
$4,650 USDSan Jose, CA
Instron cat.# 2810-405 5KN (1124lbf) 4-Point Bend upper anvil assembly
used
- Manufacturer: Instron
Instron cat.no. 2810-405 5kN 4-POINT BEND UPPER ANVIL ASSEMBLY
$2,650 USDSan Jose, CA
MTS Insight 1kN (225lbf) 1EL tensile and compression testing machine with Extended frame, 3 load cells, Pneumatic grips, and Testworks 4 software
used
- Manufacturer: MTS
Extended length frame for testing longer samples PC with Test works 4 software and manuals 1KN static load cell (225lbf) with cal certificate 250N load cell with cal certificate 50N load cell with cal certifi...
Tip: Enter manufacturer, model or keyword