Used Materials Testing in Taiwan

Portable Hydrostatic Head Tester
- used
- Manufacturer: cometech testing machines
QC-317M(N) Portable design and without electricity that can proceed with test. No time and space limitations, mainly used on the spot measurement, inspect textile water-resistance ability. The test method is divi...
Taichung City, Taiwan
H.D.T. Heat Deflection Tester Confirm to ASTM D648 ISO 75-1 Standard
- used
- Manufacturer: cometech testing machines
The specimen is given a stress at the center, and the temperature should increase by 2 degrees Celsius per minute. When the specimen’s center area reach the deflection of 0.254mm, the temperature is determined as...
Taichung City, Taiwan
Demattia Flex Crack Tester Confirm to ASTM-D813, JIS-K6301 Standard
- used
- Manufacturer: cometech testing machines
QC-625 Rubber, leather, synthetic leather, sole of shoes, after a constant flexing bending motion, observe the cracking lever to judge and compare the endurance of material. Industry: Rubber, Leather, shoes sole
Taichung City, Taiwan
QC-116 Digital Bursting Strength Tester Confirm to ISO-2759, GB/T 6545, JIS-P8112, JIS-L1018, ASTM-D2210, TAPPI-T403 Standard
- used
Digital Bursting Strength Tester is used for testing the bursting resistance for samples such as base paper, corrugating paper, leather, synthetic leather. This tester is a digital type that features automatic co...
Taichung City, Taiwan
DIN Abrasion Tester Confirm to DIN53516 ISO-4649 GB/T 9867 SATRA TM174 Standard
- used
QC-618A is suitable for elastic material, rubber, tires, conveyor belts, transmission belts, shoe soles and software synthetic leather. The specimen of wear area is dia. 16mm which provide the required load and t...
Taichung City, Taiwan
QC-317F Digital Hydrostatic Head Tester Confirm to AATCC127, JIS- L1092, ISO811 Standard
- used
- Manufacturer: cometech testing machines
Hydrostatic Head Tester (Hydro tester) is used for determining the water penetration resistance of high-waterproof clothingor coated fabrics by conducting the hydrostatic pressure test. It is an Open-Plan. The si...
Taichung City, Taiwan
Tape Holding Power Tester (Normal Type) 10 sets Confirm to GB/T 4851, ASTM D3654, PSTC 7 Standard
- used
- Manufacturer: cometech testing machines
QC-801(A)(B)(C) Specimen stick test area can use 1/2”x1”or 1”x1”, unified to use 0.45 pound of load scrunch through specimen, hanging counterweight in the lower end of specimen. Timer automatically stops counting...
Taichung City, Taiwan
Electric Pencil Hardness Tester Confirm to ASTM D3363, ECCA T4, MILC27 227, NEW5350, SIS184187, SNV37113, JIS-C3003/D0202 Standard
- used
GI-M023 according to WolffWilborn standard, this tester is designed to measure the coating surface hardness scrape-resistance, applied to experiment analysis or control production quality, suitable products inclu...
Taichung City, Taiwan
Manual Rockwell Hardness Tester Confirm to GB/T230.2, JJS Z2245, EN-ISO6508, ASTME-18 Standard
- used
Applications: Hard alloy / Surface hardened steel / Copper alloy / Carburized steel / Hard cast steel / Malleable casting / Annealed steel / Hardened steel /Aluminum alloy / Soft steel / Bearing steel Features: ●...
Taichung City, Taiwan
X-Sight ONE Video Extensometer
- used
- Manufacturer: cometech testing machines
The common contact type extensometer might have the unstable results or inconvenient operation issues due to its clamping, counterweight, eccentricity and the operation space problems. It has high possibility to ...
Taichung City, Taiwan
GR-B050 90° peel grips
- used
- Manufacturer: cometech testing machines
Capacity: 200N | Jaw face width: 5-10mm | Specimen thickness: 0.01~3mm | Temperature limits: 0~100℃ | Weight: 2200g set | Standard: ASTM D3330
Taichung City, Taiwan
GR-M020 Short Distance Compressive Grip
- used
- Manufacturer: cometech testing machines
Capacity: 2kN | Jaw face width: 30x30mm | Specimen thickness: 16mm | Mini. load cell: 200N | Temperature limits: 0~100℃ | Weight: 4637g | Standard: TAPPI T826
Taichung City, Taiwan
GR-M010 Finch Wet Tensile Strength Grip
- used
- Manufacturer: cometech testing machines
Capacity: 1kN | Jaw face width: 25mm | Specimen thickness: 230mm | Mini. load cell: 50N | Temperature limits: 0~100℃ | Up weight: 827g | Down weight: 1140g | Standard: TAPPI T456
Taichung City, Taiwan
GR-I010 Uniaxial Grip
- used
- Manufacturer: cometech testing machines
Platen area: 60x60mm | Range of movement: ±25mm | Temperature limits: 0~200℃ | Weight: 1463g
Taichung City, Taiwan
GR-I030 Screwed Collect Grip
- used
- Manufacturer: cometech testing machines
Capacity: 500N | Jaw face width: 1~9mm | Mini. load cell: 100N | Temperature limits: 0~100℃ | Weight: 621g
Taichung City, Taiwan