Used Materials Testing in Taiwan

GR-B02A Wheel peel grips
- used
- Manufacturer: cometech testing machines
Capacity: 200N | Wheel width: 12.7mm | Specimen thickness: 0.1~2mm | Temperature limits: -10~100℃ | Weight: 440g | Standard: ASTM D3330
Taichung City, Taiwan
GR-A030 Eccentric Grips
- used
- Manufacturer: cometech testing machines
Capacity: 2kN | Jaw face width: 52mm | Specimen thickness: 0.2~4mm | Mini. load cell: 200N | Temperature limits: -10~200℃ | Weight: 1143g
Taichung City, Taiwan
GR-A020 Spring Loaded Fold Grips
- used
- Manufacturer: cometech testing machines
Capacity: 2kN | Jaw face width: 44mm | Specimen thickness: 0.2~3mm | Mini. load cell: 200N | Temperature limits: -10~200℃ | Weight: 687g
Taichung City, Taiwan
GR-B040 90° peel grips
- used
- Manufacturer: cometech testing machines
Capacity: 200N | Jaw face width: 32mm | Specimen thickness: 0.01~2mm | Temperature limits: -10~100℃ | Weight: 1992g | Standard: ASTM D3330
Taichung City, Taiwan
GR-E010 Yarn Grip
- used
- Manufacturer: cometech testing machines
Capacity: 200N | Core diameter size: Ø0.1〜Ø1mm | Mini. load cell: 20N | Temperature limits: -10~200℃ | Weight: 432g | Standard: ASTM D2256
Taichung City, Taiwan
GR-C040 3 point bend/flexure
- used
- Manufacturer: cometech testing machines
Capacity: 10kN | Jaw face width: 200mm | Specimen thickness: 25~280mm | Mini. load cell: 1kN | Temperature limits: 0~200℃ | Up weight: 2774g | Down weight: 16622g
Taichung City, Taiwan
Manual Roller , Motor Roller Confirm to JIS-C2107, Z0237, PSTC 7 Standard
- used
- Manufacturer: cometech testing machines
QC-803A QC-803A is controlled by hand, hold roller and slightly go up, let fixed base leave the axle center, this moment the roller equals to standard weight, with 300mm/min speed back and forth roll through spec...
Taichung City, Taiwan
Perspiration Tester Confirm to AATCC-15, ISO 105, JIS 0848, GB T5713 Standard
- used
- Manufacturer: cometech testing machines
QC-315 is used to determine the fastness of colored textiles soaked in water condition. Using textile and one piece (multi-fiber fabric) or two pieces (single fabric) stitched, after soaking in solution, be clamp...
Taichung City, Taiwan
GR-L020 Narrow Grip
- used
- Manufacturer: cometech testing machines
Capacity: 10N | Jaw face width: 20mm | Specimen thickness: 0.1~9mm | Mini. load cell: 10N | Temperature limits: 0~100℃ | Weight: 123g
Taichung City, Taiwan
GR-L010 Elasticity Grip
- used
- Manufacturer: cometech testing machines
Capacity: 10N | Jaw face width: 9mm | Specimen thickness: 0.1~2mm | Mini. load cell: 10N | Temperature limits: 0~100℃ | Weight: 38g
Taichung City, Taiwan
GR-L030 Button Grip
- used
- Manufacturer: cometech testing machines
Capacity: 300N | Wire diameter: Ø7~Ø15mm | Mini. load cell: 200N | Temperature limits: 0~200℃ | Up weight: 925g | Down weight: 3468g
Taichung City, Taiwan
GR-I020 Adjusted Grip
- used
- Manufacturer: cometech testing machines
Capacity: 500N | Jaw face width: 88mm | Specimen thickness: 80mm | Temperature limits: 0~100℃ | Weight: 2256g
Taichung City, Taiwan
GR-K010 Zipper Grip
- used
- Manufacturer: cometech testing machines
Capacity: 500N | Jaw face width: 50mm | Specimen thickness: 0.5~4mm | Mini. load cell: 50N | Temperature limits: -30~200℃ | Weight: 1727g | Standard: ASTM D2061
Taichung City, Taiwan
GR-H130 Pneumatic Grips
- used
- Manufacturer: cometech testing machines
Capacity: 1kN | Jaw face width: (w)mm | Mini. load cell: 200N | Temperature limits: -10~60℃ | Weight: 2436g
Taichung City, Taiwan
GR-F060 Wedge Grip
- used
- Manufacturer: cometech testing machines
Capacity: 500kN | Jaw face width: 50mm | Mini. load cell: 30kN | Temperature limits: 0~100℃ | Weight: 54000g
Taichung City, Taiwan