Used Surface Treatment / Cleaning

Trusted Seller
SIMCO TG-3 Ionizing Air Gun USED
- used
- Manufacturer: Simco
Input: 100 VAC, 50/60 Hz, 0.36/0.34 Amp Output: 5.35 kVAC SC: 5mA Max 7 Bar Max Pressure 40°C Max Temperature Removed from: Meiki Injection Molding Machine Model: MDMI VT-1000IID Control Expedited shippi...
$181 USD
Holly, MI
Trusted Seller
METAL FABRICATOR 3 Zone Hot Runner USED
- used
- Manufacturer: METAL FABRICATOR
3 Zone with (3) Used XIN LEI Hot Runner Cards Expedited shipping services are available upon request. All taxes due are the responsibility of purchaser. Visitors are welcome to inspect equipment prior to purc...
$499 USD
Holly, MI
Trusted Seller
WATLOW HEAT ELEMENT U6-29-123-2 Used
- used
- Manufacturer: WATLOW
240V 9KW 3PHY Expedited shipping services are available upon request. All taxes due are the responsibility of purchaser. Visitors are welcome to inspect equipment prior to purchase. This piece is located at...
$62 USD
Holly, MI
Trusted Seller
TEMPCO TPN01172 Heat Element USED
- used
- Manufacturer: TEMPCO
M 19 11 12 kW 460 Volt 3 Phase Expedited shipping services are available upon request. All taxes due are the responsibility of purchaser. Visitors are welcome to inspect equipment prior to purchase. This p...
$140 USD
Holly, MI
Trusted Seller
TEMPCO TNP01173 HEAT ELEMENT USED
- used
- Manufacturer: TEMPCO
2.5 kW 240 Volt 3 Phase D 17 24 Expedited shipping services are available upon request. All taxes due are the responsibility of purchaser. Visitors are welcome to inspect equipment prior to purchase. This ...
$140 USD
Holly, MI
Trusted Seller
WATLOW HEAT ELEMENT U6-29-123-2 Used
- used
- Manufacturer: WATLOW
240V 9KW 3PHY Expedited shipping services are available upon request. All taxes due are the responsibility of purchaser. Visitors are welcome to inspect equipment prior to purchase. This piece is located at...
$62 USD
Holly, MI
Trusted Seller
Plasmatherm SLR-720 RIE System
- used
- Manufacturer: Plasma-Therm
- Model: SLR-720
PLASMATHERM SLR-720 RIE consisting of:- Model: SLR-720- Single chamber with load lock- Currently configured for 4" wafers - Can process up to 8"/200mm wafers (with proper tooling, available at additional cost) - ...
Decatur, GA
Trusted Seller
Oxford Plasmalab 100 ICP System
- used
- Manufacturer: Oxford
- Model: PlasmaLab 100
OXFORD PLASMALAB 100 ICP ETCHER consisting of:- Model: Plasmalab 100 ICP- Inductive Coupled Plasma Source (ICP380)- Max wafer size: 8"/200m diameter (8" platen)- X-20 PLC Controller- New Windows 10 PC- Cryo Table...
Decatur, GA
Trusted Seller
MicroTech Solvent Wet Bench
- used
MicroTech Solvent Wet Bench consisting of:- 2 IPA Tanks- 2 Process Tanks - Megasonic Tank w/ Recirculation - Ultrasonic Tank w/ Recirculation- Capable of Processing 6 & 8" Wafers- Robotic Handling- Vintage: Appro...
Decatur, GA
Trusted Seller
Plasmatherm Odyssey Asher
- used
- Manufacturer: Plasma-Therm
PLASMATHERM ODYSSEY HDRF ASHER consisting of:- Model: Odyssey HDRF- Configured for 150mm wafers- 2 Chambers- Vintage: Approximately 2019- Used Minimally for R&D & Light ProductionConfigured with Gases:- O2- O2- C...
Decatur, GA
Trusted Seller
Oxford PlasmaPro NGP1000 ICP 380
- used
- Manufacturer: Oxford
- Model: PlasmaPro NGP1000
OXFORD PLASMAPRO NGP1000 ICP 380 ETCHER consisting of: - Model: Oxford PlasmaPro NGP1000 ICP380 ETCHER- Load Locked Chamber - 490mm Diameter Aluminum Lower Electrode- Capable of running up 450mm wafers- System P...
Decatur, GA
Trusted Seller
Yield Engineering YES 58 HMDS Vapor Prime Oven
- used
- Manufacturer: Yield Engineering
- Model: YES-58
YIELD ENGINEERING YES 58 HMDS VAPOR PRIME OVEN consisting of:- Model: YES 58- Dual Function (Prime / Reversal)- Up to 200 Degrees Celsius - Chamber Dimensions 16” x 16” x 16”- One Shelf - 1700W Heater- Temperatur...
Decatur, GA
Trusted Seller
Yield Engineering YES-5TA HMDS Vapor Prime Oven
- used
- Manufacturer: Yield Engineering
- Model: YES-5
YES-5TA HMDS Vapor Prime Oven consisting of:- Model: YES-5TA- SN: 89066- As-Is Condition
Decatur, GA
Trusted Seller
Veeco Lancer Ion Beam Etch System (IBE)
- used
- Manufacturer: Veeco - Sloan
Veeco Lancer Ion Beam Etch System (IBE) consisting of: - Model: Lancer - Currently configured for 150mm (change kit for 200mm available) - Vintage: Approximately 2019 - Used Minimally for R&D & Light Pro...
Decatur, GA
Trusted Seller
Oxford Plasmalab 100 RIE System
- used
- Manufacturer: Oxford
- Model: PlasmaLab 100
OXFORD PLASMALAB 100 RIE SYSTEM consisting of:- Model: Plasmalab 100 Plus- Up to 8"/200mm wafer handling- Allows small batch processing for R&D and Pilot Production- Load-locked System- Computer, Keyboard, New Fl...
Decatur, GA
Ulvac Enviro Surface Treatment / Cleaning
- used
- Manufacturer: Ulvac
- Model: Enviro
Good condition Ulvac Enviro Surface Treatment / Cleanings manufactured in 2000. Located in Ireland and other countries. Click request price for more information.
Ireland